Guide describing how to properly test the air barrier between the garage and house, and how to ensure the air barrier is tight enough to prevent garage air from entering the home.
Guide describing how to insulate a basement to improve the overall thermal performance of the building and provide more dry, usable conditioned space for home occupants and for HVAC equipment.
Guide describing how to air seal the gap between the drywall shaft wall (i.e., common wall) and the structural framing between units in multifamily housing.
This guide describes installation procedures for continuous rigid insulation to help provide thermal protection and reduce thermal bridging; depending on the product it may also serve as structural sheathing, or the moisture control layer.
This guide describes air barrier and insulation installation, along with air sealing for double walls - half or full walls included in a home design as an architectural feature that provides a more dimensional appearance.
Guide describing how to create an air barrier between the garage and the conditioned space above it to prohibit pollutants from entering a home's interior.
Guide describing how to hang ducts with supporting straps or saddles to adequately support ducts so they do not sag and are not pinched or compressed in a manner that would cause damage to the ducts, the duct insulation, or the duct air barrier covering.
Guide describing the types of whole-house fans, installation details to reduce energy loss, and how to operate them for comfort and energy savings based on climate zone.