Guides A-Z

Guide describing how to insulate a basement to improve the overall thermal performance of the building and provide more dry, usable conditioned space for home occupants and HVAC equipment.

Guide describing ways to air-seal an attached garage in new and existing homes.

Guide describing how to air-seal bathroom and kitchen exhaust fans.

Guide describing ways to seal drywall to the top plate of an exterior wall to air-seal the wall cavity.

Guide describing how to air-seal duct and flue shafts.

Guide describing how to air-seal common walls between dwelling units in multifamily housing.

Guide describing how to air-seal sill plates in single-family homes and multifamily buildings.

Guide describing how to insulate and air-seal attic knee walls and floor joist cavities under knee walls.

Guide describing how to achieve RESNET Grade 1 installation standards, and meet/exceed code using batt insulation in existing walls.

Guide describing how to increase insulation in existing homes by installing batt insulation on the ceiling plane of a vented attic.

Guide describing blown insulation into exterior wall cavities of existing homes with minimal disruption to occupants.

Guide describing how to create a capillary break at all crawlspace floors using polyethylene sheeting to manage moisture in crawlspaces.

Guide describing how to install moisture-resistant materials on walls behind showers and tubs to help manage moisture.

Guide describing vapor retarder permeability, insulation interaction, and example construction in a hot-humid climate.

Guide describing how to install continuous air barriers in exterior walls.

Guide describing how to provide a strong continuous load path from the roof through the wall to the foundation to ensure a structurally sound building and increase racking resistance in hurricanes, high winds, tornados, and earthquakes.

Guide describing continuous rigid insulation installation procedures to reduce thermal bridging and help provide thermal protection.

Guide describing air barrier installation, insulation installation, and air-sealing for double walls (half or full walls included in a home design as an architectural feature that provides a more dimensional appearance).

Guide describing how to insulate and air-seal dropped ceilings and soffits to prevent air leakage.

Guide describing method for installing ducts in a duct chase above a dropped ceiling.

Guide describing how to insulate a new foundation wall or an existing foundation wall by adding rigid insulation to the exterior side.

Guide describing how to apply flashing to the bottom of exterior walls to create a continuous drainage plane.

Guide describing how to install and properly integrate flashing at the intersection of the wall and roof on an existing home.

Guide describing how to install flashing that is integrated with air and water control layers around piping, vents, and other wall penetrations as part of an exterior wall retrofit.

Guide describing the air-sealing of rim joists on walls connecting homes and attached garages.