BASC Search

Guide describing options for insulating and air sealing at either the attic floor or along the roof line in new homes.

Guide describing how to increase insulation in existing homes by installing batt insulation on the ceiling plane of a vented attic.

Guide describing a method for insulating an unvented attic by spraying foam insulation along the underside of the roof deck.

Guide describing principles of insulating and air sealing band joists as a stand alone energy upgrade, or as part of creating a closed crawlspace.

Guide describing how to insulate closed crawlspace walls and band joist areas with rigid foam board insulation.

Guide describing how to add spray foam insulation to the underside of the existing roof deck as part of the conversion of a vented attic to an unvented, insulated attic.

Guide describing the installation of insulating sheathing above the roof deck on existing homes. This retrofit assembly is appropriate for homes with conditioned attics or where the retrofit is intended to create a conditioned attic.

Guide describing wind washing of insulation in the eaves of vented attics and how to prevent it.

Guide describing how to re-roof an existing home with a sloped roof and add insulation above the roof deck.

Guide describing methods for insulating an unvented attic along the roof line.

Guide describing an approach to re-roofing an existing flat roof to improve thermal, water, and air control performance.

Guide describing the practice of burying HVAC ducts in loose-fill insulation on the attic floor.

Guide describing approaches to burying and encapsulating ducts in unconditioned attics to increase the overall R-value of duct insulation.

Guide describing method for insulating an unvented crawlspace or conditioned basement with rigid foam on the interior side of the walls.

Guide describing how to upgrade a crawlspace floor in an existing home by adding insulation.

Guide describing how to insulate an existing slab floor by adding rigid foam insulation over the slab then installing a floating subfloor.

Guide describing application of a radiant barrier layer in the attic to block radiant heat transfer between hot surfaces and heat-absorbing surfaces.

Guide describing how to install and properly integrate flashing at the intersection of the wall and roof on an existing home.

Guide that illustrates how and when to encapsulate ductwork in unconditioned attics, increasing the R-value of duct insulation, mitigating condensation issues, and reducing air leakage.

Guide describing how to air seal and insulate flex ducts.

Guide describing ways to construct wall assemblies in cold climates to minimize the likelihood of condensation formation inside the walls.

Guide describing continuous rigid insulation installation procedures to reduce thermal bridging and help provide thermal protection.

Guide describing how to insulate a basement to improve the overall thermal performance of the building and provide more dry, usable conditioned space for home occupants and HVAC equipment.

Guide describing insulation techniques for skylight shaft walls.

Guide describing how to retrofit older solid masonry homes to withstand seismic activity while including energy-efficient retrofits.