Filter
Hurricanes / High Winds / Tornadoes
Showing 25 - 48 of 49 results:
Description
Guide describing how to brace gable end walls to resist wind pressures.
Guide:
Low-Slope ("Flat") Roofs
Description
A guide describing how to install low-sloped ("flat") roofs with insulation above the roof deck that resist wind pressures during high-wind events.
Guide:
Metal Roofs
Description
Guide discussing how to install metals roofs to resist damage from high winds, hurricanes, ice, and wildfires.
Description
Guide describing how to select the siding materials best suited to withstand hazards like rain, wind, hail, fire, and pests.
Guide:
Mulching
Description
Guide describing how to properly apply mulch to landscaping for water retention and erosion control.
Guide:
Outdoor HVAC Equipment Elevated and Secured for Resistance to Floods, Earthquakes, and High Winds
Description
A guide describing how to elevate and secure HVAC equipment for protection against floods, earthquakes, and high winds.
Description
Guide describing how to slope solid surfaces outside of a home so rainwater flows away from the home.
Description
Guide describing how to install appropriate connectors to provide a continuous load path to improve the wind resistance of attached porches, carports, and decks during high-wind events.
Description
Information guide describing best practices for dealing with hazards that might be encountered when returning to a home to do renovations after a natural disaster.
Description
Guide describing ways to retrofit an existing roof to increase its resistance to damage during hurricanes, high winds, and earthquakes.
Description
A guide for choosing, installing, and flashing roof anchoring systems for solar panels.
Description
Guide describing requirements for sealing roof sheathing to increase resistance to high winds and rain.
Guide:
Roof Edge Protection
Description
Guide describing construction and protection of roof edges to resist air pressures at roof edges during high-wind events.
Description
Guide describing how to seal roof valleys and how to seal around pipes, chimneys, and other roof deck penetrations.
Description
Guide describing the design of a shelter-in-place room in a home for protection during hurricanes and tornadoes.
Description
Guide describing methods to keep birds, rodents, and other pests out of vent openings and other locations in new and existing homes.
Description
Guide describing how to install step and kick-out flashing where walls meet roofs.
Description
Guide describing the need for adequate structural sheathing in exterior walls in homes in high-wind areas.
Description
Guide describing the use of swales, French drains, and site grading to minimize saturation of foundations and ponding of stormwater runoff on sites.
Description
Guide describing techniques for installing insulating sheathing as a continuous drainage plane on walls.
Description
Guide describing construction of unvented, sloped, insulated roof assemblies in high wind zone areas.
Guide:
Vented versus Unvented Attic
Description
Guide describing options for insulating and air sealing at either the attic floor or along the roof line in new homes.
Description
Guide describing how to construct the walls of a home with bracing to resist high wind and earthquake loads.
Description
Guide describing how to install flashings to help direct water down and out of windows and doors openings in exterior walls.