General
-
BodyFind best-practice building construction drawings for attic, wall, foundation, and window assemblies for every region of the country. -
DescriptionGuide describing common areas of thermal bridging in mass (concrete) and steel-framed multistory buildings and methods and materials for addressing those points of thermal bridging. -
DescriptionGuide describing RESNET Grade 1-level installation of insulation in walls, attics, and floors.
Walls
-
DescriptionGuide describing continuous rigid insulation installation procedures to reduce thermal bridging and help provide thermal protection. -
DescriptionGuide describing techniques for installing insulating sheathing as a continuous drainage plane on walls. -
Guide:
Walls Adjoining Porch Roof
DescriptionThis guide describes how to install a rigid air barrier to separate the porch attic from the conditioned space.
Ceilings/Attics
-
DescriptionGuide describing how to install insulation below platforms constructed in the attic for walkways, HVAC equipment, or storage. -
Guide:
Attic Knee Walls
DescriptionGuide describing how to insulate and air-seal attic knee walls and floor joist cavities under knee walls. -
Guide:
Unvented Attic Insulation
DescriptionGuide describing methods for insulating an unvented attic along the roof line. -
DescriptionGuide describing how to air-seal and insulate a ceiling where the insulation is installed on top of the ceiling (on the attic floor) in a vented attic. -
DescriptionGuide describing construction of unvented, sloped, insulated roof assemblies in high wind zone areas.
-
DescriptionGuide describing a method for insulating an unvented attic by spraying foam insulation along the underside of the roof deck.
Floors and Foundations
-
Guide:
Cantilevered Floor
DescriptionGuide describing how to air-seal and insulate a cantilevered floor. -
Guide:
Slab Edge Insulation
DescriptionGuide describing how to insulate slabs on grade in climate zones 3 and higher. -
DescriptionGuide describing method for insulating an unvented crawlspace or conditioned basement with rigid foam on the interior side of the walls.
-
DescriptionGuide describing how to insulate a basement to improve the overall thermal performance of the building and provide more dry, usable conditioned space for home occupants and HVAC equipment. -
DescriptionGuide describing how to air-seal and insulate the floor above an unconditioned basement or crawl space.
Garages and Plenums
-
DescriptionGuide describing methods for insulating heated garage plenums in multifamily parking garages. -
DescriptionGuide describing how to properly insulate garages in multifamily buildings.