Guide discussing disaster resistance related to asphalt shingle roofing when installing roofing on new construction or when repairing or replacing roofing on existing homes.

Guide providing information about flashing around a chimney to protect the intersection of the roof and chimney walls from water intrusion and anchoring of a chimney to prevent collapse in high winds.

Guide describing how to repair or replace skylights in existing homes.

Guide describing how to provide a continuous water control layer across the roof assembly by sealing all penetrations for pipes, vents, etc. in existing roofs.

Guide describing how to install and properly integrate flashing at the intersection of the wall and roof on an existing home.

Guide describing the installation of gutters, downspouts, and alternate options for managing rainwater run-off from roofs.

A guide describing how to install low-sloped ("flat") roofs with insulation above the roof deck that resist wind pressures during high-wind events.

Guide discussing how to install metals roofs to resist damage from high winds, hurricanes, ice, and wildfires.

A guide for choosing, installing, and flashing roof anchoring systems for solar panels.

Guide describing requirements for sealing roof sheathing to increase resistance to high winds and rain.

Guide describing how to apply self-adhered asphaltic membranes at eaves in cold climates to help guard against ice dams.

Guide describing construction and protection of roof edges to resist air pressures at roof edges during high-wind events.

Guide describing how to seal roof valleys and how to seal around pipes, chimneys, and other roof deck penetrations.

Guide describing how to install step and kick-out flashing where walls meet roofs.

Guide describing an approach to re-roofing an existing flat roof to improve thermal, water, and air control performance.

Guide describing how to re-roof an existing home with a sloped roof and add insulation above the roof deck.