Browse by Category | Building America Solution Center

Guide describing why and how to avoid using damp materials in construction.

Information guide describing the concept of heat flow in residential buildings.

Information guide describing the concept of moisture flow in residential buildings.

Guide describing how to install moisture-resistant materials on walls behind showers and tubs to help manage moisture.

Guide describing vapor retarder permeability, insulation interaction, and example construction in a hot-humid climate.

Guide describing how to complete remove and replace a window in an existing home.

Guide describing ways to construct wall assemblies in cold climates to minimize the likelihood of condensation formation inside the walls.

Guide describing how to install continuous air barriers in exterior walls.

Guide describing how to provide a strong continuous load path from the roof through the wall to the foundation to ensure a structurally sound building and increase racking resistance in hurricanes, high winds, tornados, and earthquakes.

Guide describing continuous rigid insulation installation procedures to reduce thermal bridging and help provide thermal protection.

Guide describing how to apply water management strategies to below-grade walls.

Guide describing construction and insulation techniques for double wall framing.

Guide describing air barrier installation, insulation installation, and air-sealing for double walls (half or full walls included in a home design as an architectural feature that provides a more dimensional appearance).

Guide describing installation of a fully sealed continuous weather resistant barrier to provide a drainage plane to keep rainwater out of above-grade walls.

Guide describing how to repair or replace skylights in existing homes.

Guide describing the use of doors that are insulated and are impact rated or have protective coverings for resistance to hurricane, high winds, wildfires, and thermal losses.

Guide describing wall assemblies and materials that are resistant to destruction from wildfires.

Guide describing how to apply flashing to the bottom of exterior walls to create a continuous drainage plane.

Guide describing how to install and properly integrate flashing at the intersection of the wall and roof on an existing home.

Guide describing how to install flashing that is integrated with air and water control layers around piping, vents, and other wall penetrations as part of an exterior wall retrofit.

Guide describing garage doors that are pressure-rated to withstand wind pressures from hurricanes, high winds, and tornados.

Guide providing information about high-performance and high-efficiency windows including ENERGY STAR-certified windows.

Guide describing materials and methods for incorporating thermal mass into the construction of a home for temperature regulation, energy savings, and resistance to extreme heat and cold.

Guide describing how to insert a replacement window in an existing home.

Walls, Windows, and Doors

Building Materials with High Moisture Content Not Enclosed

Building Science Introduction - Heat Flow

Building Science Introduction - Moisture Flow

Cement Board Installed behind Tile and Panel Tub and Shower Enclosures

Class I Vapor Retarders Not Installed in Above-Grade Walls in Warm-Humid Climate

Complete Window and Frame Replacement

Condensation Control for Walls in Cold Weather

Continuous Air Barrier in Exterior Walls

Continuous Load Path Provided with Connections from the Roof through the Wall to the Foundation

Continuous Rigid Insulation Sheathing

Damp-Proof Exterior Surface of Below-Grade Walls

Double Walls for More Insulation

Double-Wall Architectural Feature

Drainage Plane Behind Exterior Wall Cladding

Existing Skylights Repaired or Replaced and Fully Flashed

Exterior Doors Are Insulated, Impact Rated, and Fire Rated

Fire-Resistant Wall Assemblies

Flashing at Bottom of Exterior Walls

Flashing of Roof-Wall Intersections in Existing Homes

Flashing of Wall Penetrations in Existing Homes

Garage Doors are Pressure Rated

High-Performance (ENERGY STAR) Windows

High-Thermal-Mass Construction

Insert Replacement Window

Filter

Walls, Windows, and Doors