Guides A-Z

Guide describing how to frame and insulate corners to reduce heat losses and gains though structural framing.

Guide describing how to increase insulation in existing homes by installing batt insulation on the ceiling plane of a vented attic.

Guide describing ways to construct wall assemblies in cold climates to minimize the likelihood of condensation formation inside the walls.

Guide describing how to provide a strong continuous load path from the roof through the wall to the foundation to ensure a structurally sound building and increase racking resistance in hurricanes, high winds, tornados, and earthquakes.

Guide describing continuous rigid insulation installation procedures to reduce thermal bridging and help provide thermal protection.

Guide describing installation of a fully sealed continuous weather resistant barrier to provide a drainage plane to keep rainwater out of above-grade walls.

Guide describing how to install and properly integrate flashing at the intersection of the wall and roof on an existing home.

Guide describing how to brace gable end walls to resist wind pressures.

Guide describing how to apply an air control layer directly over existing wall sheathing and cover with two layers of insulating sheathing held in place by vertical furring strips.

Guide outlining how to retrofit an exterior wall and/or attic to provide continuous air sealing.

Guide describing the need for adequate structural sheathing in exterior walls in homes in high-wind areas.

Guide describing how to install stucco over rigid foam insulation in new and existing homes.

Guide describing techniques for installing insulating sheathing as a continuous drainage plane on walls.

Guide describing the design and installation considerations for recladding of above grade walls using insulated vinyl siding.