Showing results 1 - 13 of 13
Description
Guide describing how to air seal the gap between the drywall shaft wall (i.e., common wall) and the structural framing between units in multifamily housing.
Description
Guide describing how to achieve RESNET Grade 1 installation standards, and meet/exceed code using batt insulation in existing walls.
Description
Guide describing how to increase insulation in existing homes by installing batt insulation on the ceiling plane of a vented attic.
Description
Guide describing how to provide a strong continuous load path from the roof through the wall to the foundation to ensure a structurally sound building and increase racking resistance in hurricanes, high winds, tornados, and earthquakes.
Description
This guide describes air barrier and insulation installation, along with air sealing for double walls - half or full walls included in a home design as an architectural feature that provides a more dimensional appearance.
Description
Guide describing method for installing ducts in a duct chase above a dropped ceiling.
Description
Guide describing how to correctly air seal a wall with missing top plates or open wall cavities.
Description
Guide describing how to brace gable end walls to resist wind pressures.
Description
Guide describing ways to retrofit an existing roof to increase its resistance to damage during hurricanes, high winds, and earthquakes.
Description
Guide describing how to install spray foam on the exterior of the existing home after framing over the existing siding.
Description
Guide describing how to install stucco over rigid foam insulation in new and existing homes.
Description
Guide describing the design and installation considerations for recladding of above grade walls using insulated vinyl siding.