Description
Guide describing ways to seal drywall to the top plate of an exterior wall to air-seal the wall cavity.
Whole-Building Design Strategies -
Disaster Resistance
Solution Center Guides
Showing results 1 - 10 of 10
Description
Information guide describing proper attic air-sealing, insulation, and ventilation to combat ice dam formation on roofs in cold climate zones.
Description
Guide providing guidance on insulating attic eaves in new and existing single-family homes and multifamily buildings.
Description
Guide describing how to insulate and air-seal attic knee walls and floor joist cavities under knee walls.
Description
Guide describing application of a radiant barrier layer in the attic to block radiant heat transfer between hot surfaces and heat-absorbing surfaces.
Description
Guide describing the use of attic ventilation fans to mechanically pull outside air through the attic in an attempt to cool the attic, control moisture, and prevent ice dams.
Description
Guide describing causes of condensation in attics and roof assemblies during cold weather and ways to reduce this condensation.
Description
Guide describing the installation of roof vents that are resistant to damage from high winds and entry of wind-borne rain, wildfire embers, or pests.
Description
Guide describing the advantages and disadvantages of gable roofs and hip roofs and how both designs react under high wind loads.
Description
Guide describing how to brace gable end walls to resist wind pressures.