BASC Search | Building America Solution Center

Slab-on-grade foundation and safe room.

Publication Date

Mon, 03/01/2021 - 12:00

Seismic and Thermal Resistance in Slab-on-Grade Foundations with Turned-Down Footings (Monolithic Slabs)

Guide describing how to construct and retrofit homes built on slab-on-grade foundations in earthquake-prone areas to withstand seismic forces by properly installing wall to foundation connections.

Externally insulated concrete slab-on-grade foundation with a turn-down footing, showing anchorage of the wall to the foundation for seismic resistance

Interior and exterior safe room locations for slab-on-grade foundations.

Publication Date

Mon, 12/01/2014 - 12:00

Concrete slab-on-grade foundation with a turn-down footing insulated on its top surface, showing anchorage of the wall to the foundation for seismic resistance

Publication Date

Tue, 08/24/2021 - 12:00

Externally insulated post-tensioned concrete slab-on-grade foundation wall with a turn-down footing showing anchorage of the wall to the foundation for seismic resistance

Publication Date

Tue, 08/24/2021 - 12:00

Externally insulated post-tensioned concrete slab-on-grade foundation wall with a turn-down footing showing anchorage of the wall to the foundation for seismic resistance

Publication Date

Tue, 08/24/2021 - 12:00

Brick veneer framed wall supported by a concrete slab-on-grade foundation with a turn-down footing insulated on its top surface, showing anchorage of the wall to the foundation for seismic resistance

Publication Date

Tue, 08/24/2021 - 12:00

This exterior insulated slab-on-grade monolithic grade beam foundation is protected from pests by termite shield at the sill plate, borate-treated framing, flashing at end of wall insulation, brick veneer over slab-edge insulation, and rock ground cover.

Publication Date

Mon, 03/01/2021 - 12:00

This left-to-right sequence shows the method of wall extension to flood-proof a masonry house on a slab foundation. Here the new, raised floor is wood-framed over a wet-floodproofed crawlspace, but using fill to create a new raised slab is also an option.

Publication Date

Wed, 01/01/2014 - 12:00

Brick veneer is supported by a concrete stem wall thermally separated from the slab-on-grade foundation with turn-down footing which is also insulated on top; anchorage for seismic resistance is also shown

Right – The raised-slab, CMU block stem wall, above-grade walls, and roof of this house use flood damage-resistant materials, integrated water, vapor, and air control layers, and construction methods which promote good drainage and rapid drying

Publication Date

Sat, 01/01/2022 - 12:00

Right – The raised-slab, poured-concrete stem wall, above-grade walls, and roof of this house use flood damage-resistant materials, integrated water, vapor, and air control layers, and construction methods which promote good drainage and rapid drying

Publication Date

Sat, 01/01/2022 - 12:00

Right – The raised-slab, brick-and-block stem wall, above-grade walls, and roof of this house use flood damage-resistant materials, integrated water, vapor, and air control layers, and construction methods which promote good drainage and rapid drying

Publication Date

Sat, 01/01/2022 - 12:00

Good water management practices like sloping grade away from house, and installing gutters, perimeter drain pipe, a capillary break, and free-draining soils or drainage mat protect the foundation from water saturation.

Publication Date

Thu, 03/01/2012 - 12:00

Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes

Author(s)

Grin Aaron,

Lstiburek Joseph W

Organization(s)

Building Science Corporation,

BSC

Publication Date

September, 2014

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Air Sealed, Insulated Basements

Guide describing how to insulate a basement to improve the overall thermal performance of the building and provide more dry, usable conditioned space for home occupants and HVAC equipment.

Damp-Proof Exterior Surface of Below-Grade Walls

Guide describing how to apply water management strategies to below grade walls.

Earthquake Overview

Overview guide describing how to prepare homes to be resistant to earthquake forces.

High-Thermal-Mass Construction

Guide describing materials and methods for incorporating thermal mass into the construction of a home for temperature regulation, energy savings, and resistance to extreme heat and cold.

Hurricanes and High Winds Overview

Overview guide outlining home construction techniques used in hurricane and high wind areas.

Seismic and Insulation Retrofits of Solid Masonry Walls

Guide describing how to retrofit older solid masonry homes to withstand seismic activity while including energy efficient retrofits.

Insulated Concrete Forms (ICFs)

Guide describing how to install insulated concrete forms to block excessive heat loss and gain though structural framing.