Showing results 1 - 19 of 19
Description
Guide describing methods for insulating an unvented attic along the roof line.
Description
Information guide describing proper attic air-sealing, insulation, and ventilation to combat ice dam formation on roofs in cold climate zones.
Description
Guide describing how to increase insulation in existing homes by installing batt insulation on the ceiling plane of a vented attic.
Description
Information guide providing links to guides describing specific ways to air-seal, insulate, and ventilate attics and roofs to minimize heat gain in new and existing homes.
Description
Guide providing guidance on insulating attic eaves in new and existing single-family homes and multifamily buildings.
Description
Guide describing how to add spray foam insulation to the underside of the existing roof deck as part of the conversion of a vented attic to an unvented, insulated attic.
Description
Guide describing how to re-roof an existing home with a sloped and add insulation above the roof deck.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Guide providing information on controlling attic ductwork sweating.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Guide providing information on controlling attic ductwork sweating.
Description
Information guide describing things to consider in the attic, ceiling, or roof before attempting retrofits of items including HVAC, wiring, or structural systems.
Description
Guide describing how to insulate and air-seal dropped ceilings and soffits to prevent air leakage.
Publication Date
Overview
The intent of this brief is to provide code-related information about controlling moisture in unvented attics by installing a vapor diffusion port/vent that would convey water vapor from an unvented attic to the outside when air-permeable insulation materials are installed and can be verified as being in compliance with the related codes and standards for residential construction. Providing consistent information to document compliance with codes and standards to all relevant parties responsible for verifying compliance (e.g., code officials, builders, contractors, designers, etc.) is expected to result in increased compliance and more timely, less challenging and more uniform plan review and field inspections.
Description
Guide describing causes of condensation in attics and roof assemblies during cold weather and ways to reduce this condensation.
Description
Guide describing options for designing and locating the thermal boundary at either the attic floor or along the roof line in new and existing homes.
Description
Guide describing the use of attic ventilation fans to mechanically pull outside air through the attic in an attempt to cool the attic, control moisture, and prevent ice dams.
Description
Guide describing application of a radiant barrier layer in the attic to block radiant heat transfer between hot surfaces and heat-absorbing surfaces.