Showing results 1 - 22 of 22
Description
Guide describing how to hang ducts with supporting straps or saddles to adequately support ducts so they do not sag and are not pinched or compressed in a manner that would cause damage to the ducts, the duct insulation, or the duct air barrier covering.
Description
Guide describing how to increase insulation in existing homes by installing batt insulation on the ceiling plane of a vented attic.
Description
Guide describing a method for insulating an unvented attic by spraying foam insulation along the underside of the roof deck.
Description
Guide describing how to insulate a basement to improve the overall thermal performance of the building and provide more dry, usable conditioned space for home occupants and HVAC equipment.
Description
Guide describing how to add spray foam insulation to the underside of the existing roof deck as part of the conversion of a vented attic to an unvented, insulated attic.
Description
Guide describing how to re-roof an existing home with a sloped and add insulation above the roof deck.
Description
Guide describing how to air-seal bathroom and kitchen exhaust fans.
Description
Guide describing how to install a bathroom exhaust fan to remove excess moisture.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Guide providing information on controlling attic ductwork sweating.
Description
Information guide describing things to consider in the attic, ceiling, or roof before attempting retrofits of items including HVAC, wiring, or structural systems.
Description
Information guide describing how to apply a whole-house approach to home improvement with energy efficiency upgrades, improved indoor air quality, and increased comfort.
Description
Guide describing steps to take to minimize indoor humidity in preparation for cold winter weather.
Description
Information guide describing things to consider in the basement or crawlspace before attempting retrofits of adjacent items including HVAC, wiring, or structural systems.
Publication Date
Overview
The intent of this brief is to provide code-related information about controlling moisture in unvented attics by installing a vapor diffusion port/vent that would convey water vapor from an unvented attic to the outside when air-permeable insulation materials are installed and can be verified as being in compliance with the related codes and standards for residential construction. Providing consistent information to document compliance with codes and standards to all relevant parties responsible for verifying compliance (e.g., code officials, builders, contractors, designers, etc.) is expected to result in increased compliance and more timely, less challenging and more uniform plan review and field inspections.
Description
Guide describing causes of condensation in attics and roof assemblies during cold weather and ways to reduce this condensation.
Description
Guide describing ways to construct wall assemblies in cold climates to minimize the likelihood of condensation formation inside the walls.
Description
Guide providing information about treating bulk water drainage issues and moisture control measures in existing basements and crawl spaces.
Description
This guide describes how to install a whole-building ventilation system to provide adequate dilution of indoor air contaminants.
Description
Guide describing application of a radiant barrier layer in the attic to block radiant heat transfer between hot surfaces and heat-absorbing surfaces.
Publication Date
Overview
The intent of this brief is to provide code-related information for aerosol sealing building enclosures to achieve durable air tightness levels that will be accepted as being in compliance with the code.