Research Tracker

The objective of this project to develop and commercialize white and amber OLED lighting solutions that are uniquely tailored to the health care industry, ranging from hospital to senior assisted living centers. This project will include five main deliverables: 1) Voice of customer (VOC) exploration with hospital and healthcare personnel including nurses, facilities and other medical staff to identify lighting applications in which OLED would provide unique value. 2) Tuning amber OLED panels, if necessary for large scale production specifically for healthcare, 3) Designing and fabricating OLED fixture prototypes based on VOC 4) obtaining feedback from medical staff on prototypes including performance and effects on workflow, patients or other concerns and define launch product 5) establishing path for full commercialization of product(s).

This research will examine several high aspect ratio (15:1) cylinders, (smooth, roughened and grooved) in a wind tunnel test that specifically measures dynamic response to simulated boundary layer flow. Both along- and cross-wind response will be measured for a range of wind speeds to determine the nature of the loading and in particular the effect of the grooves on the loading and axial wind speeds. This will provide the necessary data to develop a full proposal to study the bio-mimicry aspects of this work to the aerodynamics of tall buildings.

This project seeks to develop operational procedures and proper system sizing guidelines for the inclusion of thermal storage in biomass-fired steam generation. The Town of Chester will design, install, commission, and evaluate a high-efficiency, low-emission pellet-fired steam boiler integrated with a wet steam accumulator for thermal storage. The system will be installed in the Town of Chester municipal building in Chestertown, NY, a 36,000 sq. ft. brick building originally fitted with a steam heating system. The existing boiler room has two oil-fired steam boilers, one currently out-of-service, which will be replaced by the proposed biomass-fired steam boiler. The project will demonstrate, measure, and evaluate the benefits of complete system integration, including a properly sized biomass-fired boiler, adequate thermal storage, building energy management and controls, and an existing oil-fired boiler

Advanced Climate Technologies (ACT) is a manufacturer of fully automatic, high-efficiency, low-emission biomass-fired boilers, interested in expanding their manufacturing facility in Niskayuna, NY to include an automated manufacturing system. This project involves the design, purchase, installation, and commissioning of the automated manufacturing system. The automated manufacturing system will allow ACT to process raw steel into prepared components. This will include a state-of-the art multi-tiered automated process that will allow for the cutting, drilling, and nesting of ASME steel plate used for the vessel and component parts of the boiler. By increasing their manufacturing capabilities, the ACT will bring processes in-house that have thus far been subcontracted. This project will eliminate certain inefficiencies in the manufacturing value chain and reduce total manufacturing time for product improvement, cost, and waste. The cost savings will be passed to consumers, directly benefiting the biomass heating market and customers in NY.

The Lighting Research Center at Rensselaer Polytechnic will create a prototype office desktop lighting control. The device will be a combination of a motion sensor, photosensor, manual dimmer or switch, and wireless transmitter. It will sit either directly on a desk surface or be mounted to the top of a computer monitor, and will control the lighting in private or open offices. It will be paired with a receiver that will control the luminaire(s) that are nearby.

UoR shall evaluate a new manufacturing process for producing lower cost superwicking materials. The wicking performance of the material produced with the new manufacturing process will be tested and compared to a wicking material produced using a laser surfacing technique.

The project will seek to develop a residential and commercial logwood-fired boiler with the ability to modulate firing rates down to <10% of rated output while maintaining clean and efficient operation. The boiler will include high levels of insulation in both combustion chambers and preheating of combustion air to promote clean operation at low loads. Forced, multi-port injection and swirl mixing of secondary air similar to natural gas fired burners will be used. Certifications such as UL, CSA, and ASME will be sought.

Project will develop the mechanical and electrical OLED integration technologies to enable large area ceiling or wall mounted fixtures to be fabricated. These OLED array fixtures will provide contiguous panels of light with minimal gaps between OLED sections and very low profile to be readily mounted on walls, ceiling or office furniture components. The project will focus on innovations in the following areas to integrate OLED into effective products and applications: A power and wiring architecture that efficiently down converts voltage level, conforms to safety standards, and facilitates OLED fixture installation. "Thin and compact" constant current driver architecture to complement the OLED panel construction "Thin and compact" mechanical and electrical connection scheme to combine an array of panels to attain a contiguous light source

Under this project, OLEDWorks will develop the quality and reliability system for a high efficiency white OLED light product (greater than 60 lumens per watt) that will serve as platform for a wide variety of lighting applications and solutions. The project will develop the fundamental platforms for process robustness, end of line reliability, and part tracking required for manufacturing scale commercialization, and market adoption of white lighting panels. The focus of the process development is reliability and overall quality of affordable OLED lighting products. Processes that will be developed and delivered include manufacturing process robustness for product reliability and quality control reliability testing strategy, product grading or binning, end of the line test at high throughput, packaging and shipping strategy, and product traceability.

Hudson Fisonic will develop, design, manufacture, and install FDs for space heating and domestic hot water at the Woolworth building (57 stories, 900k ft2). The performance of the FD will be monitored for 12 months to determine the steam and potable water savings from use of this technology. Hudson Fisonic will start the commercialization of the FD technology by engaging the manufacturer - Division LLC Corporation, located in Long Island City, New York, in fabricating and preparing the necessary facilities and equipment for commercial manufacturing of FDs

Brookhaven National Laboratory will evaluate a DC system directly-coupled to a solar energy system that enables the use of DC power directly for office lighting. This system will use equipment developed by Nextek Power Systems and will being installed in a Suffolk County office buildings. BNL will document the energy savings and value propositions available from this type of system compared to a conventional DC to AC lighting system powered a solar photovoltaic system. This work will provide information that can be used to determine the value propositions for installing this type of system at larger scale in buildings throughout New York State.

The objectives of this project are to: 1) Develop, evaluate, and down-select a set of component technologies that will enable highly efficient and uniform large area white OLED lighting panels at low cost, 2) Integrate the selected subset of technology elements to demonstrate the required panel level performance targets of 80 lm/W with 85% brightness uniformity at 2000-3000 cd/m2 for a large area OLED panel at least 100 cm2 in size 3) Demonstrate scalability of the low-cost technologies and 4) Demonstrate an OLED luminaire using the high-performance OLED panels delivering more than 2000 lumens at greater than 65 lm/W.

The proposer seeks to assess the prevalence of different space heating systems and the efficacy of known measures that address their most common inefficiencies. The proposer will convene an advisory panel, assess the scope of steam heat as a problem in New York as well as existing measures, and conduct a cost-benefit and impact analysis. The project will complete with the development of proposals for policymakers, industry customers, and potential training programs.

Unilux Advanced Manufacturing, LLC is a Schenectady, NY based corporation that is engaged in the design, evaluation, manufacture, and commercial distribution of high performance large scale boilers. Unilux currently has built and partially tested a 10 MMBTU prototype large scale condensing boiler (LSCB) with an anticipated efficiency of 96% compared to a conventional boiler efficiency of 81%. An 8-20 MMBTU LSCB would be appropriately sized for large facilities such as public schools, universities, state owned buildings, hospitals, and hotels.

The project will develop LED luminaires specifically for three applications: clean rooms, containment areas and surgical suite applications. The LED luminaires will (1) conform to DLC Qualifications and LM79/LM80/IES Handbook guidelines and produce desired levels of glare-free, uniform illumination; (2) maximize energy efficiency, heat dissipation, and integration into modern ceiling structures; and (3) develop new universally accepted standards for evaluation for LED luminaires in clean room applications and validate their performance with respect to leakage and surface contamination. The proposed work includes mechanical/electrical design, prototype creation, component procurement, tooling, production, assembly, field testing, independent lab testing and cost/sell budget development. It also includes market/sales development to create new marketing materials and training of sales force (internal support, traditional distribution and OEM), and creation of a promotional program.

Gas Technology Institute will develop and conduct advanced modeling of the GHP system in order to provide a detailed assessment of the technology using regional weather data and detailed utility information for several New York locations and building types. The project will include a market assessment of the competitiveness of the variable refrigerant volume (VRV) GHP, including energy and economic benefits, the value of resiliency, and the value of self-powered heating and cooling systems for customers in New York. The Proposer will take into account the energy savings, operating costs, lifecycle costs, and greenhouse gas emissions in order to determine any energy, economic, or environmental merits of GHPs over standard HVAC equipment

The Contractor seeks to baseline test, install, and evaluate the performance of a 21kW micro-CHP system, that provides hot water and power as a packaged unit, at (2) Host Sites in NY. The proposed System shall feature a synchronous generator and black-start capability. The goal of the project is to provide manufacturers, building owners, and installers information regarding the deployment of micro-CHP systems, in order to promote a sustainable market for micro-CHP systems in NY. Once the Host Sites are selected, the System shall be independently tested and configured and the Host Sites shall be prepared for the proper integration of the Systems on-site. The Systems shall be installed and monitored for 12 months before developing a report to disseminate to the stakeholders.

The Wild Center will refine the analysis to determine the optimum thermal storage volume with respect to energy savings, cost, and available area. The preliminary analysis shows that 1,700 gallons would yield improved performance, however they do not have the space to install a single tank with this volume. Instead, they will install two tanks each with half the identified volume. Clarkson University will build upon their previous studies of the boiler and extensively monitor the performance benefits associated with the thermal storage. They will capture data of the course of two years which will provide a comprehensive data set. They will also conduct an evaluation according to the ASHRAE 155P test method. The Wild Center will incorporate the data into their exhibits, allowing visitors to better understand biomass combustion.

Hydronic Specialty Supply will develop an interface module that organizes the hydronics layout of a biomass-fired boiler and integrates smart control options for multi-boiler systems. The controls will be able to optimally manage the operation of the existing fossil fuel boiler, new biomass boiler, thermal storage tank, space heating, and even DHW. This interface module will be comprised of standardized hardware components, therefore reducing net installed cost to consumers and taking advantage of economies of scale. The project will bring the proposed solution through the prototyping phase into laboratory and field tests.

In this project, the Lighting Research Center (LRC) of Rensselaer Polytechnic Institute will demonstrate and evaluate LED lighting and controls. The LRC will first evaluate a range of commercially available but currently underutilized control products and systems, from simple stand-alone controls, to fixture-integrated products, and more complex automated control systems. The LRC will review the features, operations, and protocols of each system selected and will analyze the operation of these control products with various types of drivers commonly used in commercially available LED lighting products. Once this review is complete, the LRC will down select two or more control systems to demonstrate and evaluate in different areas of an existing office building. The LRC will also select and install LED lighting fixtures to retrofit the existing fluorescent lighting in the building. Once the systems are installed and commissioned, the LRC will evaluate the operation of the control and LED lighting systems and compare their performance, operation, energy savings, and occupant acceptance to each other, as well as to the previously existing lighting system.

Activities under this project will advance the development and market readiness of Vital Vio lighting products. These activities include characterization and optimization of Vital Vios current prototypes, full scale design concepts, LED module requirements including design and thermal analysis, LED module for incorporation into final fixture designs, various testing and certifications, and pilot implementations.

This project involved researching the feasibility of commercial "humidity sponges", which could help even out daily and multi-day fluctuations of relative humidity in building spaces. This proof of concept study investigated the wicking and water vapor transfer properties of several materials, in addition to the topology and material properties of the structures termites use to manage humidity in their colonies. The project completed with a market analysis, in order to better understand the marketplace for passive or transient building controls in the energy-efficient dehumidification market space.