BASC Search

Upper wall insulation installation with butyl z-flashing

Image

Windows are installed as “outies” in this wall assembly using a self-adhered membrane water and air control layer with continuous exterior insulation

Image

Step 5. Apply self-adhesive flashing over top edge of the wall flashing, diverter, and rigid foam insulation

Image

This house design in the Hot-Humid climate uses a slab foundation, masonry walls, and an Exterior Insulation Finish System (EIFS) cladding.

Image

This drawing shows key head details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer and continuous insulation

Image

This drawing shows key jamb details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer and continuous insulation

Image

This drawing shows key sill details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer and continuous insulation

Image

This drawing shows key head details for an “outie” window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer and continuous insulation

Image

This drawing shows key jamb details for an “outie” window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer and continuous insulation

Image

This drawing shows key sill details for an “outie” window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer and continuous insulation

Image

Right - Permeable rigid mineral wool insulation and appropriate water-management flashing details are integrated with new rigid foam siding to keep water away from the sill beam above the foundation wall

Image

Taped Insulating Sheathing Drainage Planes

Guide

Guide describing techniques for installing insulating sheathing as a continuous drainage plane on walls.

Flashing of Wall Penetrations in Existing Homes

Guide

Guide describing how to install flashing that is integrated with air and water control layers around piping, vents, and other wall penetrations as part of an exterior wall retrofit.

This exterior wall retrofit permits drying to the exterior of a sill plate installed on an untreated flat foundation wall

Image

Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes

Reference

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Step and Kick-Out Flashing at Roof-Wall Intersections

Guide

Guide describing how to install step and kick-out flashing where walls meet roofs.

Proper flashing around windows is especially important when the rigid foam serves as the drainage plane in the wall

Image

Clean taping areas and install 3" tape on vertical joint of upper insulation overlapping the horizontal joint

Image

Flashing at Bottom of Exterior Walls

Guide

Guide describing how to apply flashing to the bottom of exterior walls to create a continuous drainage plane.

Tape the joint between the top insulation sheet and the Z-flashing with 2" wide tape to improve air tightness

Image

Flashing of Roof-Wall Intersections in Existing Homes

Guide

Guide describing how to install and properly integrate flashing at the intersection of the wall and roof on an existing home.

This farmhouse was retrofit by removing the existing siding and adding taped insulated sheathing and battens before installing new siding

Image

Right – The flashing is properly installed to create a complete drainage system with continuous rigid insulation sheathing/siding

Image

Rigid foam insulation can serve as the drainage plane when all seams are taped. Furring strips provide an air gap behind the cladding.

Image

Step 1. Apply roof underlayment over roof deck and up the sidewall over the rigid foam insulation

Right – two-thirds of the blue butyl flashing tape is above the sheathing seam; the top edge of the butyl flashing tape is covered with clear sheathing tape that is also offset so two-thirds is above the top edge of the butyl flashing.

Image

Moisture Control for Residential Buildings

Reference

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Upper wall insulation installation with butyl z-flashing

Windows are installed as “outies” in this wall assembly using a self-adhered membrane water and air control layer with continuous exterior insulation

Step 5. Apply self-adhesive flashing over top edge of the wall flashing, diverter, and rigid foam insulation

This house design in the Hot-Humid climate uses a slab foundation, masonry walls, and an Exterior Insulation Finish System (EIFS) cladding.

This drawing shows key head details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer and continuous insulation

This drawing shows key jamb details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer and continuous insulation

This drawing shows key sill details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer and continuous insulation

This drawing shows key head details for an “outie” window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer and continuous insulation

This drawing shows key jamb details for an “outie” window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer and continuous insulation

This drawing shows key sill details for an “outie” window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer and continuous insulation

Right - Permeable rigid mineral wool insulation and appropriate water-management flashing details are integrated with new rigid foam siding to keep water away from the sill beam above the foundation wall

Taped Insulating Sheathing Drainage Planes

Flashing of Wall Penetrations in Existing Homes

This exterior wall retrofit permits drying to the exterior of a sill plate installed on an untreated flat foundation wall

Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes

Step and Kick-Out Flashing at Roof-Wall Intersections

Proper flashing around windows is especially important when the rigid foam serves as the drainage plane in the wall

Clean taping areas and install 3" tape on vertical joint of upper insulation overlapping the horizontal joint

Flashing at Bottom of Exterior Walls

Tape the joint between the top insulation sheet and the Z-flashing with 2" wide tape to improve air tightness

Flashing of Roof-Wall Intersections in Existing Homes

This farmhouse was retrofit by removing the existing siding and adding taped insulated sheathing and battens before installing new siding

Right – The flashing is properly installed to create a complete drainage system with continuous rigid insulation sheathing/siding

Rigid foam insulation can serve as the drainage plane when all seams are taped. Furring strips provide an air gap behind the cladding.

Step 1. Apply roof underlayment over roof deck and up the sidewall over the rigid foam insulation

Mastic Home Exteriors Installation Guide

Install minimum 6" wide self-adhered butyl Z-flashing

Right – Two-thirds of acrylic tape is offset above the joint and over and above the fasteners

Right – two-thirds of the blue butyl flashing tape is above the sheathing seam; the top edge of the butyl flashing tape is covered with clear sheathing tape that is also offset so two-thirds is above the top edge of the butyl flashing.

Moisture Control for Residential Buildings