A dishwasher performs an automated sequence of operations to wash, rinse, and dry dirty dishes. Once loaded and started, a dishwasher boosts the temperature of incoming hot water, which is sprayed with detergent onto the dirty dishes. The hot water also dissolves the detergent, which mixes with the hot water and is sprayed onto the dishes in the wash cycle. The dirty water is then drained from the tub and the dishwasher rinses the dishes with clean, hot water. After rinsing, the dishes are either air dried or dried with an electric resistance element.

New dishwashers feature computer-controlled wash cycles that customize the wash duration, water temperature, and spray intensity to the quantity and dirtiness of the dishes, as determined by chemical or optical sensors. This allows the dishwasher to save energy and water when the user runs partial or lightly soiled loads. The most efficient ENERGY STAR-certified dishwasher models in the market consume approximately 35% less energy and 35% less water than models that just meet the Federal Standard, offering a viable opportunity for homeowners to save money over the product lifetime (Figure 1).

The popularity of dishwashers has steadily grown. In 1980, 37% of U.S. homes had a dishwasher; in 1990, 45% had a dishwasher; in 2000, 52% had one; and in 2017, 67% of homes had a dishwasher, according to the Energy Information Administration (2015 Residential Energy Consumption Survey).

How to Replace a Dishwasher with an ENERGY STAR-Certified Model

1. Select a new energy-efficient dishwasher.

• Before choosing a new dishwasher (or helping the homeowner to choose a new dishwasher), use a tape measure to determine the space constraints in the spot designated for the dishwasher.
• Use a tape measure to determine the space constraints of doorways and hallways to ensure that the new model can be moved to its installation location.
• Choose a dishwasher model that meets the needs of the household. Options to consider include built-in or portable configurations, dimensions, capacity, style/design, features, and energy efficiency.
• Use the ENERGY STAR Product Finder to identify and determine the energy use of new ENERGY STAR-certified dishwasher models. You can also download data from the Product Finder to identify dishwasher models with connected functionality, which would allow the homeowner to save more money by engaging in demand response services from the utility company.
• Check the Database of State Incentives for Renewables & Efficiency® or the ENERGY STAR Rebate Finder to determine whether a dishwasher model is eligible for a rebate or incentive in your area.
• Compare EnergyGuide labels (Figure 3) as another way to identify energy-efficient dishwasher models.

2. Install the new energy-efficient dishwasher.

• Many appliance vendors will install the new dishwasher. If you are installing it, use the following installation instructions or see the manufacturer’s installation instructions.
• Use a dolly or hand truck to move the new dishwasher to its bay. Before doing so, put floor mats or paper along the route to protect the floor. Sweep out the dishwasher bay to remove any dust or dirt.
• Remove the packaging from the dishwasher. Ask the homeowner to keep the box and packaging materials for a few days in case the dishwasher has to be returned for replacement or repair.
• Set up the water supply.
  • Consider using a copper supply pipe since it will last longer than a braided steel pipe. In addition, consider using a tube-bending spring, which fits inside the pipe or around it and bends the pipe with even pressure to prevent kinking.
  • Carefully uncoil the copper tubing and loosely thread it from the dishwasher bay through the cabinet side and up into the sink cabinet via one of the existing floor holes.
  • Uncoil enough copper to get past the front of the bay. Using a tubing cutter, cut the line. Insert a narrow tube-bending spring inside the end of the copper nearest the hot water valve. Use the spring to shape the tubing toward the valve then down to the hole in the cabinet. Do not kink the tube.
  • Slide a compression nut, then ferrule, over the end of the tubing at the valve. Hand-tighten the nut over the ferrule and onto the valve. Using an adjustable wrench, tighten it another quarter turn.
  • Note: tube-bending springs can fit either inside or outside a pipe. Inside springs can only be used on a pipe’s ends, but they make tighter turns. Use outside springs to gently curve the middle of a pipe.
• Position water and electric lines.
  • Find the two front-to-back clear paths on the underside of the dishwasher. These are meant to keep the copper tubing and electrical wiring away from the motor as they run from the back of the dishwasher bay to the front of the appliance. Measure the distance from these paths to the sides of the dishwasher. Transfer the measurements to the floor inside the bay using a pencil to mark lines on the floor. Note which side leads to the water hookup and which side is for wiring.
  • Using an outside-bending spring, shape the copper pipe so it wraps down the cabinet side and along the mark for the water-pipe channel. Twist the electrical wire so it lies in the correct path. Use tape to secure both to the floor in position over their marked lines.
• Connect water supply.
  • Lay down a tarp to protect the floor and tip the dishwasher on its back. Remove the cover panel at the bottom of the unit. Wrap Teflon around the water inlet’s threads. Screw a brass elbow (i.e., ‘dishwasher 90’ fitting) onto the inlet. Tighten it with an adjustable wrench.
  • Stand the dishwasher up and put it into the bay. Check that the water and electrical lines are properly aligned. Feed the end of the drain line from the dishwasher through the side of the cabinet and up via the unused existing floor hole. Then have a helper guide the drain line as you slowly slide the dishwasher into place.
• Tighten the nut onto the inlet.
  • Using the inside bending spring, turn the copper supply to the elbow. Cut off any excess pipe but leave two inches of straight copper pipe for the compression fitting.
  • Slide a compression nut and ferrule over the end of the pipe and hand-tighten the nut onto the inlet. Using an adjustable wrench, tighten it another quarter turn. Tip: Never hold a dishwasher by its door as you move or tilt it.
• Make the electrical connection.
  • Turn the power off at the breaker to the dishwasher. Place a piece of tape over the breaker switch to ensure no one turns it back on while you’re working.
  • Clamp the MC armored cable to the junction box. Slide a cable clamp over the end of the exposed wires until it’s around the metal sheathing that bundles the wires together. Using a screwdriver, tighten down the clamping bracket over the sheathing to hold the wires in place.
  • Unscrew the star-shaped nut on the clamp, then push the wires and threaded end of the clamp through the hole in the side of the unit’s junction box. Hand-tighten the nut back on the clamp from the inside of the box. Tighten the nut with pliers or a screwdriver.
  • Line up like colors of wire together (white to white, black to black) and tighten them together with wire nuts. Connect the green ground wire to the dishwasher’s green or bare copper wire with a wire nut.
  • Stuff the wires into the box, cover it with the metal cover plate, and screw the plate to the box.
• Attach the drain line.
  • Take the cap off the drain line connection. A small amount of water may come out as most dishwashers are tested at the factory before shipment.
  • Attach the drain line to the dishwasher. Using pliers, crimp the clamp around the drain line hose to secure it.
  • Thread the drain line into the existing hole in the sink cabinet. Slip a hose clamp over the end of the dishwasher’s drain line and push the hose over the sink drain inlet, either branching off the drain tailpiece or the side of the garbage disposal. Take care not to kink the line or wrap it around the sink spray hose line. Slide the hose clamp over the connection and turn the screw to tighten it down.
  • Wrap a loop of plumber’s strapping around the drain line with excess. Hold the hose and strapping against the back of the cabinet so it makes an arc that is higher than the drain inlet. Using a screwdriver, attach the strapping to the cabinet wall. This will prevent sink backflow from entering the dishwasher.
• Screw the dishwasher in place.
  • Adjust the feet on the front of the dishwasher until the mounting brackets touch the underside of the counter. Open the dishwasher door. Holding a level against the inside top of the dishwasher, adjust the feet until it is level side to side.
  • With the dishwasher level, fasten it to the underside of the countertop by driving screws through the mounting brackets. Replace the cover panel at the base of the unit.
• Turn on the water and power.
  • Turn on the water beneath the sink. Turn the power on at the breaker. Connect the electrical cord into a grounded three-prong outlet. Do not remove the ground prong, do not use an adapter, and do not use an extension cord. Failure to follow these instructions can result in fire or electrical shock.
  • Check for leaks at the water connections over the next few hours. If any appear, turn off the water and tighten the compression fittings slightly. If no leaks appear, test run the dishwasher.

3. Set up an Internet-connected dishwasher.

• The dishwasher manufacturer will have an app available for download on a smartphone, tablet, or other mobile device. Download the app on your (or the homeowner’s) preferred device. The app will guide you through all of the steps to connect the dishwasher. Below are some general steps.
• Open the app on the device and sign in or create a WiFi connect account. This will associate any connected appliances with the homeowner’s device.
• On the app, click “add an appliance” and choose “dishwasher.”
• On the dishwasher control panel, select the “ready to connect” mode. Now press “next” on your app.
• Press “start” on the dishwasher, which should then display the network name and password.
• In the app, type in the password found on the dishwasher display. You will be directed to join the network listed on the dishwasher display. This will start communication between the app and the dishwasher.
• After the app has connected to the dishwasher, choose your home WiFi network to connect your device back to the home network. The connecting process will start. The dishwasher is connected once the app says “connected.”

4. Provide product literature and instructions to the homeowner.

• Provide the home owner with any manufacturer product literature and warranty information.
• Submit, or supply to the homeowner to submit, paperwork for any applicable utility rebates or tax incentives.
• Advise the homeowner that they can save energy and water by scraping off scraping food residue from plates with a rubber spatula instead of pre-rinsing their dishes at the sink. New dishwasher models have improved spray technologies so pre-rinsing is unnecessary. Advise the homeowner to load the dishwasher until its completely full, use the appropriate dish detergent, and let the dishwasher do the rest.