Skip to main content
EERE » BTO » Building America » Solution Center Home » Research Tracker

Research Tracker

This tool is intended for researchers and program managers to quickly find research projects around the country that are relevant to their work. The four organizations who provided content for this purpose represent the largest energy efficient buildings research portfolios in the country. These organizations each provided the content that they were comfortable sharing publically. Therefore, upon clicking on a particular project, it is possible that certain pieces of content are not present. Where possible, a point of contact is provided so that specific questions can be directed to that person. We welcome your comments! If you would like to provide any feedback on this tool (positive or constructive) please email basc@pnnl.gov.

Showing results 1 - 50 of 134

A Combined Water Heater, Dehumidifier, and Cooler

The University of Florida will develop a technology for compact, low-cost combined water heating, dehumidification, and space cooling. This technology has the potential to save 480 TBtu/year in water heating and an additional 135 TBtu/year by reducing the air conditioning load.

A New Generation of Building Insulation by Foaming Polymer Blend Materials

The Industrial Science & Technology Network, Inc. will develop an environmentally clean, cost-effective building insulation with superior performance. Commercialization of this technology would reduce U.S. energy consumption related to building envelope components by 7%, equal to $8 billion in annual economic savings.

A New Hybrid Approach to Energy Modeling

Lawrence Berkeley National Laboratory will identify an alternative method to estimate two difficult-to-measure inputs used in building energy modeling. The end product will simplify and help automate the process of creating a calibrated model for existing buildings.

Acoustic Building Infiltration Measurement System (ABIMS)

Argonne National Laboratory will develop an acoustic method of measuring the infiltration of a building envelope. The method will enable infiltration measurement of all buildings, which could lead to decreased building energy use.

Aerosol Sealing in New Construction

The Center for Energy and Environment and partners will field test and optimize an innovative new method for whole house air-sealing using aerosol sealant. This aerosol sealant method is already a proven duct sealing solution, and can reduce time and labor costs by simultaneously measuring, locating, and sealing leaks.

Affordable High-R Panel Wall System Demonstration

The University of Minnesota will field test an innovative insulated solid-panel building envelope system that (1) eliminates thermal bridging, improves durability, and reduces construction costs compared to conventional, wood-framed construction; and (2) is appropriate for the affordable housing market.

Alabama Residential Energy Code Field Study

The Institute for Market Transformation will investigate whether investing in statewide building energy code education, training, and outreach programs can produce a significant change in residential building code compliance rates. The results of these activities provide the necessary business case to influence non-government entities, particularly utilities, to make investments in similar programs, which could lead to substantial national energy savings.

All-Digital Plug and Play Passive RFID Sensors for Energy Efficient Building Control

Clemson University, with their partners Harvard University, Phase IV Engineering Corp., and Iowa Energy Center, will develop, demonstrate and pre-commercialize low-cost, digital plug-and-play, passive radio frequency identification sensors for measuring indoor and outdoor temperature and humidity, which will improve building operations and cut energy costs.

Assessing the Market and Space-Conditioning Needs of Low-Load Homes

High performance, low-load homes face unique space conditioning challenges that are not adequately addressed by HVAC design practices and equipment offerings. Equipment manufacturers have yet to include a diverse set of low-capacity equipment in their product offerings due to a lack of understanding of (1) where the low-load home market is headed and (2) the load profiles typical to low-load homes. This project looks to address both of these information gaps and ultimately send the necessary low-capacity equipment market signals to manufacturers, enabling them to design better products to meet production builder needs. The team will develop a technical whitepaper and presentation on the performance and cost tradeoffs of various equipment types/systems at meeting the comfort requirements of low-load homes, and forecasting the market penetration and equipment needs for these low-load homes.

Baseline Indoor Air Quality (IAQ) Field Study in Occupied New U.S. Homes: Hot-Humid and Mixed-Humid Climates

This project is part of a national study aimed at characterizing indoor air quality in occupied homes. The homes will be up to current energy codes, and researchers will closely monitor the use and performance of mechanical ventilation systems in those homes. Indoor and outdoor air will be sampled for formaldehyde, nitrogen oxides, carbon dioxide, and particulates as part of the indoor air quality characterization.

Better Buildings Residential Network

The Better Buildings Residential Network connects energy efficiency programs and partners to share best practices and learn from one another to increase the number of homes that are energy efficient. Better Buildings Residential programs and partners have invested more than $3 billion from federal funding and local resources to build more energy-efficient communities across the United States. The U.S. Department of Energy (DOE) is continually expanding this network of residential energy efficiency programs and partners to new members.

Bio-Based, Noncorrosive, Nonflammable Phenolic Foam Insulation

The Fraunhofer Center for Sustainable Energy Systems will develop a plastic foam for use in U.S. buildings that is less expensive, mechanically stronger, and more environmentally friendly than current options. This foam will satisfy fire safety codes without the need for fire retardants and is easy to install.

Building America Envelope Research & Roadmap support

Oak Ridge National Laboratory (ORNL) will work to address key issues in high performance HVAC and envelope systems by mitigating market uncertainty regarding the durability of high-performing envelope systems and validating and demonstrating advanced heating, ventilation, and air conditioning (HVAC) solutions for low-load homes. Improved technologies and systems can result in significant savings on monthly utility bills, reducing the payback period and offsetting the initial investment for the homeowner.

Building America Partnership for Improved Residential Constructions

The University of Central Florida will demonstrate and validate energy-efficient residential ventilation and space conditioning systems. Advanced whole-house residential construction practices can achieve 50% energy savings compared to houses built to code in hot/humid climates.

Building America Solution Center

The Building America Solution Center provides residential building professionals with access to expert information on hundreds of high-performance design and construction topics, including air sealing and insulation, HVAC components, windows, indoor air quality, and much more.

Building Efficiency Technologies by Tomorrow's Engineers and Researchers (BETTER) Capstone

The Georgia Institute of Technology will support 20 student project teams in developing building energy efficiency technologies through a capstone design project. This effort will better prepare students for employment in the building energy efficiency sector. Additionally, the combined energy savings from these projects is estimated to add up to over 1.8 Quads per year.

Building Science Education Guidelines

The U.S. Department of Energy (DOE) Building America program recognizes that the education of future design/construction industry professionals in solid building science principles is critical to widespread development of high performance homes that are energy efficient, healthy, and durable. The Building Science Education Guidelines are based on the collaborative efforts of DOE and its stakeholders to develop a framework for organizing core building science principles with key job classifications.

Certification and Rating of Attachments for Fenestration Technologies (CRAFT)

The Window Covering Manufacturing Association will create the Attachments Energy Rating Council to develop an independent rating, certification, labeling, and performance verification program for window attachments. This program will help drive market penetration of energy-saving products and further innovation in the industry.

cold climate air source heat pumps: market assessment and guidance for trades

NEEP conducted a market assessment of existing installer practices as well as existing guidance tools, protocols and resources specific to cold climates. Using the market assessment findings, NEEP developed ccashp design and installation guidance for trade contractors. The documents are developed to assist installers around sizing and selecting ASHPs for cold climate applications, while preserving high efficiency, performance, and customer satisfaction. HI Cat will cross-promote and link to the guidance.

Compact Thermoelastic Cooling System

Maryland Energy and Sensor Technologies, LLC will develop a compact, high-efficiency thermoelastic cooling system. This next-generation HVAC technology will have low environmental impact and a small carbon footprint and could lead to substantial efficiency gains in building heating and cooling.

Development and Industrialization of InGaN/GaN LEDs on Patterned Sapphire Substrates for Low Cost Emitter Architecture

Lumileds, LLC will reduce LED manufacturing costs by eliminating some of the complex processes associated with current flip-chip technology and enabling lower-cost packaging methods. This project looks to address the needs of the indoor and outdoor illumination markets, which demand the most competitive Lm/W and Lm/$ characteristics in small footprint components.

Development of Isocyanurate-Based Super Insulation at Atmospheric Pressure (SIAP)

The project effort is a two-year development program focused on isocyanurate-based nanofoam for building and industrial applications. The main target of this early stage innovation project is to develop a PIR-based super insulation at atmospheric pressure (SIAP) that (1) can attain an R-12 hrft2F/Btuin (_=12 mW/mK) via creating nanoporous morphology, (2) is mechanically robust and (3) is cost-competitive to the conventional rigid foam boards.

Development of the Industry's First Smart Range Hood

Newport Partners, in partnership with Broan-NuTone, will develop and validate a smart range hood that senses pollutants and automatically operates to remove the contaminants efficiently. The proposed smart range hood will be quiet (<1 sone), five times more energy efficient than todays ENERGY STAR models, and will capture nearly 100% of pollutants.

Dynamically Responsive Infrared Windows Coating

Pacific Northwest National Laboratory will develop a low-cost window coating that allows infrared (heat) penetration in cooler temperatures but switches to reflect infrared waves in warmer temperatures. This coating has the potential to save up to 2.24 quads/year in heating, cooling, and lighting energy use.

Eliminating Plasmon Losses in High Efficiency White Organic Light Emitting Devices for Lighting Applications

University of Michigan - Ann Arbor will develop innovative methods to outcouple the light within OLED devices in order to increase external quantum efficiency. This will be accomplished through nanoscale texturing beneath the anode outside the active region, fabricating sub-anode gratings along with microlens arrays, and top emitting structures with a sub-anode grid coupled with a reflective mirror at the base.

Energy-harvesting, Self-calibrating Wireless Sensors for Improving EE in Buildings

Oak Ridge National Laboratory will develop system-level architecture for a plug-and-play multi-sensor platform, which can utilize peel-and-stick sensors less than a quarter of an inch thick and powered by indoor, high-performance, flexible photovoltaics. By developing sensors that are multi-functional and self-powered, this innovative platform can be adopted and deployed for wider spread energy efficiency of buildings.

Fabricate On-Demand Vacuum Insulating Glazings

PPG Industries, Inc. will develop a process to produce cheaper, stronger vacuum insulating glazings (VIGs), which are used to make windows more energy efficient. This process could lead to increased adoption of VIGs in windows, which would lead to significant energy savings.

Gas-Fired Absorption Heat Pump

This project is developing a gas-fired absorption heat pump that offers a significant advancement for space and water heating technologies when compared to conventional gas heating technologies (an Annual Fuel Utilization Efficiency (AFUE) of 140% versus 100%, respectively). This heat pump will provide efficient space and water heating for single and multi-family homes in most climate zones.

Graded Alloy Quantum Dots for Energy-Efficient Solid-State Lighting

Columbia University will use an inexpensive and widely tunable library of quantum dot (QD) synthesis reagents along with automated high-throughput synthesis and analysis tools to grade the alloy composition of QD heterostructures, in order to provide stable and efficient narrow-band red down-converters for LEDs.

Health and Home Performance Initiative Messaging

Evidence in a new, groundbreaking Energy Department report, Home Rx: The Health Benefits of Home Performance, shows that home performance upgrades can improve the quality of a homes indoor environment by reducing the prevalence of harmful indoor air pollutants and contaminants. This paper is just one part of the Energy Departments broader Health and Home Performance Initiative. Another step will be to develop messaging that home performance programs, contractors, and partners can use to communicate clearly about the health benefits of home performance work with consumers and stakeholders.

Health and Home Performance Initiative Roadmap

The next step for the Initiative will be to engage with stakeholders to develop a roadmap to facilitate the home performance industrys incorporation of healthcare into their work. Workshops are slated for conferences in January, March, and May 2017.

Healthy Efficient Homes Research & Standards

Lawrence Berkeley National Laboratory will work with project partners to address several indoor air quality challenges for high performance homes through experimental, analytical and modeling efforts. The long term goal of this project is to significantly reduce the indoor air quality risks that are a barrier to industry adoption of high performance homes.

Healthy Homes Accelerator

The Healthy Homes Accelerator aims to better integrate healthy housing principles and practices in energy retrofits and new home construction; and support the creation of local partnerships between key stakeholders that are aimed at overcoming barriers to incorporating enhanced health measures in buildings.

High Efficacy, Multi-Functional SSL Platform

Cree, Inc. will incorporate a high-efficacy LED light engine into a demonstration luminaire, with concurrent advancements in LED light engines, optics, and sensors integrated to result in high efficacy as well as additional features such as spectral tuning.

High Efficiency and Stable White OLED Using a Single Emitter

Arizona State University is demonstrating an efficient and stable white organic light diode (WOLED) using a single emitter on a planar glass substrate. By simplifying the device fabrication process, increasing the robustness of materials, and providing cost-effective emitter materials, Arizona State University will help reduce the overall manufacturering costs of WOLEDs.

High Efficiency Solid-State Heat Pump Module

United Technologies Research Center will demonstrate a compressor design that will enable high-efficiency small commercial rooftop air conditioning systems. This technology could provide 30% annual energy savings and reduce energy use by 2.5 quads by 2030.

High Performance Commercial Cold Climate Heat Pump (CCCHP)

United Technologies Research Center will develop a high-performance commercial cold climate heat pump system. The system could enable annual electricity use for building space heating in cold climates to decrease by at least 25%.