Showing results 1 - 23 of 23
A 5,000- 6,000 Btu/hr air conditioner drawing about 500 watts can be installed in one window of a designated cool room (it is important that the installation is insulated and well-sealed
A Corsi-Rosenthal Box is a highly effective DIY air cleaner made of easy to obtain materials such as HVAC filters, a box fan, cardboard, and tape
A simple kit for anchoring a TV, appliance, or furniture to a wall may include straps, attachment hardware, and screws for attaching both to the appliance and to the wall
A water heater and furnace are protected from flood waters by a concrete floodwall, with a shielded, gasketed door.
A water heater is anchored to 2 x 4 wood blocking that is attached to the wall studs.
An indoor water heater should be secured to the wall’s studs to prevent it from moving or tipping over in the event of an earthquake
An innovative U-shaped heat pump offers SEER 15 efficiency and operation with smart phones
Earthquake-ready home actions include securing cabinets, shelves, and heavy furniture or electronics to walls and preparing utilities for disruptive movement.
Furniture and heavy household items should be anchored to prevent tipping over during an earthquake and for everyday use if small children are in the home
Heavy-gauge metal strapping can be used to secure water heaters and other appliances
Many hardware stores sell appliance bracing kits to secure the water heater to wall framing with metal straps
Portable air conditioners offer flexibility with where they are located, but usually need to be installed near a window as they require one or two intake/exhaust ducts connected to the exterior
Preventative steps to take throughout the home to prepare for an earthquake or other natural disasters
Small, battery-powered evaporative coolers can be appropriate for personal cooling in arid climates (only)
The cabinet above this refrigerator will keep it from tipping forward during a seismic event
The water heater and other appliances are located above the Base Flood Elevation.
This depiction of a saddle installed window heat pump does not obstruct window use and provides fairly quiet 120 Volt operation
This infrared image shows little heat gain from north-facing double-pane windows with blinds, but significant heat output from computer monitors
This MSHP operates with 120 volts power, has an EER of 18 Btu/Wh, uses about 800 W at full output, and operates remotely with a smart home control system
Use flexible straps to secure large electronics equipment like computer monitors and microwave ovens during seismic events.