Showing results 1 - 32 of 32
Image
A battery storage system can provide reliable back-up power during a grid power outage
Image
A mini-split air-conditioning system can be a highly effective low-energy approach to provide cooling to one designated zone in the house
Image
A shallow, open floor plan allows free flow of cross ventilation through the house
Image
Air speeds generated by a typical ceiling fan are in the ideal range for providing occupant cooling without causing disruption
Image
Airflow can be directed across thermal mass in the ceiling, floor, or elsewhere inside the home through various window and louver configurations
Image
Image
Image
Comfort ventilation focuses on airflow over occupants; in this example of wind-driven cross ventilation, the air is directed through the main occupied areas of the bedroom
Image
Dense hedges can encourage cross ventilation (left image) or not (right image) depending on how they are placed relative to windows
Image
Ducted whole-house fans should be installed with the duct curved and the fan suspended from rafters to reduce noise and vibration transmission to the living area.
Image
Earth tubes buried in the ground can provide pre-cooling of ventilation air or primary cooling if designed deep and long enough
Image
Even when wind is blowing parallel to a wall, an open casement window can create a zone of higher pressure near the window opening, driving airflow into the house
Image
Image
Having both low and high ventilation openings is necessary to promote airflow from the stack effect
Image
In hot, dry climates, passive cooling should focus on shading, night flush through cross ventilation and whole-house fans, potentially using high-mass construction
Image
Inducing airflow through the stack effect requires low inlets and high outlets such as a ridge hood or crown monitor
Image
Landscape trees and shrubs to funnel cooling breeze towards a home in hot climate zones.
Image
Locating windows on adjacent and opposite sides of the house will allow cross ventilation regardless of wind direction
Image
Image
Passive cooling techniques can reduce or eliminate the use of air conditioning and can be used for backup cooling during emergencies.
Image
Shade trees planted on the east or west sides of a house are one of the most effective measures that can be taken to reduce heat gains
Image
Some whole-house fans are equipped with an automatic drop-down cover to provide an air seal at the ceiling level when the fan is not in use
Image
Some whole-house fans use an automatic insulated cover achieve high R-values when the fan is not in use
Image
This air handler is located within the homes conditioned space in a closet on the main floor of the home (Source: Tommy Williams Homes).
Image
This experimental earth tube is 220 ft long, 8 inches in diameter, and is buried 10 feet deep
Image
This experimental radiative/evaporative hybrid cooling system uses water to reject heat at night through radiation and evaporation
Image
This night ventilation cooling system is timer-controlled and ducted to the home's HVAC ducts to bring in filtered fresh air at night.
Image
This room has several passive and low-energy cooling features including a ceiling fan, fully operable French doors, window shading, an outdoor water feature, and light-colored hard-scaping.
Image
Image
Image
Whole-house fans draw outside air through windows into the home and exhaust it into a vented attic
Image
Whole-house fans or wind-driven cross ventilation can be used to draw air across thermal mass for a night flush strategy