Code Briefs

Air sealing and insulating attic knee walls to code.

This brief provides an overview of the 2009 through 2015 IRC/IECC code requirements related to air sealing and insulating attached garage walls.

Guidance is needed for code-compliant installations of various cladding materials when installed over thicker foam sheathing also known as insulated sheathing or continuous insulation (c.i.).

The intent of this brief is to provide code-related information about controlling moisture in unvented attics by installing a vapor diffusion port/vent that would convey water vapor from an unvented attic to the outside when air-permeable insulation materials are installed and can be verified as being in compliance with the related codes and standards for residential construction. Providing consistent information to document compliance with codes and standards to all relevant parties responsible for verifying compliance (e.g., code officials, builders, contractors, designers, etc.) is expected to result in increased compliance and more timely, less challenging and more uniform plan review and field inspections.

Double stud wall wood framing is not specifically addressed in the International Residential Code (IRC) or International Energy Conservation Code (IECC); it is neither encouraged nor discouraged. Recommendations of where the vapor retarder and air barrier should be placed, based on research and testing are further defined in this Code Compliance Brief.

New language in the 2015 IECC allows different installation of insulation in floors over unconditioned spaces.

The intent of this brief is to provide code-related information about insulated interior/exterior wall intersections to help ensure that the feature will be accepted as being in compliance with the code.

The intent of this brief is to provide code-related information about sealing and insulating existing walls in existing residential buildings to help ensure that the measures will be accepted as being in compliance with the code. Providing notes for code officials on how to conduct plan reviews and field inspections can provide jurisdictional officials with information for acceptance. Providing the same information to builders, contractors, designers, and others is expected to result in increased compliance and fewer innovations being questioned at the time of plan review and/or field inspection.

From a model code perspective, submittal of construction documentation, permitting, plan review, and field inspection may be required depending upon the specific details of renovating the floor above an unconditioned space (e.g., floor over a vented crawl space). Several different approaches can be taken to seal and insulate existing floors during a renovation project.

The intent of this brief is to provide code-related information about sealing and insulating existing vented attics to help ensure that the measure will be accepted as being in compliance with the code. Providing the same information to all interested parties (e.g., code officials, builders, contractors, designers, etc.) is expected to result in increased compliance and fewer innovations being questioned at the time of plan review and/or field inspection.