Case Studies

Case study describing a retrofit project in the cold and very-cold climate zones.

Case study describing a multi-family town home project constructed for the City of Aspen, Colorado, with assistance from the U.S. DOE Building America research team Building Science Corporation and the National Renewable Energy Laboratory.

Case study describing project conducted by Habitat for Humanity of Greater Lowell (HfHGL) and Building Science Corporation (BSC).

Case study describing a four-square Concord home retrofitted by Building Science Corporation in Massachusetts.

Case study describing the application of insulated siding on an existing home.

Case study describing a 20-unit community of energy-efficient duplexes in Massachusetts incorporating solar water heating and photovoltaics.

Case study describing a DOE Zero Energy Ready Home 2013 Housing Innovation Award Winner in west Connecticut that scored HERS 39 without solar PV.

Case study describing a DOE Zero Energy Ready Home 2013 Housing Innovation Award Winner in Herriman, UT, that scored HERS 40 without PV, -1 with PV.

Case study describing a DOE Zero Energy Ready Home 2013 Housing Innovation Award Winner in Ithaca, NY, that scored HERS 50 without PV.

Case study describing a DOE Zero Energy Ready Home 2013 Housing Innovation Award winning custom home in Downers Grove IL that scored HERS 35 without PV.

Case study describing a 4,763 ft2 certified Passive House that achieved HERS 27 without PV through the construction of R-54 walls that use ICF plus fiberglass cavity insulation, an R-100 vented attic, extensive air sealing and flashing, triple-pane windows, ductless heat pumps, and solar hot water.

Case study describing a DOE Zero Energy Ready Home 2014 Housing Innovation Award winner that scored HERS 38 without PV and -3 with PV.

Case study describing approaches to comprehensive retrofits that are in reach of the ordinary builder.

Case study describing a multifamily retrofit project in a cold climate.

Case study describing a cost-effectively reducing energy use by over 50% in an existing home.

Case study describing a retrofit project in the cold and very-cold climate zones.

Case study describing an energy efficient renovation in the cold climate.

Case study describing a building project in the cold and very-cold climate zones.

Case study describing a stand-off furring strategy that minimizes the physical connections to each existing wall stud, uses spray foam to encapsulate existing siding materials (including lead paint), and creates a vented rain screen assembly to promote drying.

Case study describing a Habitat for Humanity zero net energy home in Denver.

Case study describing a retrofit project in the cold and very-cold climate zones.