Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 457 - 480 of 649 results:

Image:

Standard roof trusses are narrow at the eaves, preventing full insulation coverage over the top plate of the exterior walls

Standard roof trusses are narrow at the eaves, preventing full insulation coverage over the top plate of the exterior walls
CAD File:

Structured insulated panels (SIPS) as band joist

Preview Image
Structured insulated panels (SIPS) as band joist
Image:

Stucco is installed over rigid insulation, which is installed over a drainage plane consisting of a drainage gap and building wrap layer over the sheathing

Stucco is installed over rigid insulation, which is installed over a drainage plane consisting of a drainage gap and building wrap layer over the sheathing
Image:

Synthetic stucco wraps all four sides of the window openings and creates a pan flashing on the sills in exterior walls created from insulated concrete forms (ICF)

Synthetic stucco wraps all four sides of the window openings and creates a pan flashing on the sills in exterior walls created from insulated concrete forms (ICF)
Image:

Table of Maximum Fenestration U-Factor Requirements for New Homes as Listed in the 2009-2021 IECC and IRC

Table of Maximum Fenestration U-Factor Requirements for New Homes as Listed in the 2009-2021 IECC and IRC
Case Study:

Technology Solutions Case Study: Complete and Fully Aligned Air Barrier

Case Study:

Technology Solutions Case Study: Insulating Concrete Forms

Case Study:

Technology Solutions Case Study: Preventing Thermal Bypass

Case Study:

Technology Solutions Case Study: Retrofit Integrated Space and Water Heating - Field Assessment

Case Study:

Technology Solutions Case Study: Stand-Off Furring in Deep Energy Retrofits

Image:

The air tightness of the garage-to-house air barrier can be tested with a blower door kit and two manometers

The air tightness of the garage-to-house air barrier can be tested with a blower door kit and two manometers
Image:

The attic kneewall and the open floor cavities under kneewall are both sealed and insulated in one step with spray foam insulation

The attic kneewall and the open floor cavities under kneewall are both sealed and insulated in one step with spray foam insulation
Image:

The back dam of the window sill will force water out

The back dam of the window sill will force water out
Image:

The concrete slab is thermally isolated from the concrete foundation stem wall

The concrete slab is thermally isolated from the concrete foundation stem wall
Image:

The concrete slab is thermally isolated from the concrete foundation stem wall and the stem wall is insulated for cold climates

The concrete slab is thermally isolated from the concrete foundation stem wall and the stem wall is insulated for cold climates
Image:

The dark streaks seen in this infrared camera image of a return vent in a ceiling indicate cooler air is leaking in around the vent.

The dark streaks seen in this infrared camera image of a return vent in a ceiling indicate cooler air is leaking in around the vent.
Image:

The floor cavities under this attic kneewall are completely open to the unconditioned attic space and a prime target for wind washing

The floor cavities under this attic kneewall are completely open to the unconditioned attic space and a prime target for wind washing
Image:

The floor slab is completely insulated with ICF foundation walls and R-20 (3 inches) of closed-cell foam that is sprayed directly onto the ground before pouring the slab.

The floor slab is completely insulated with ICF foundation walls and R-20 (3 inches) of closed-cell foam that is sprayed directly onto the ground before pouring the slab.
Image:

The foundation walls are ICF block providing two continuous layers (R-23) of insulation around the slab, which will sit on an additional 4 inches (R-20) of low-VOC EPS foam.

The foundation walls are ICF block providing two continuous layers (R-23) of insulation around the slab, which will sit on an additional 4 inches (R-20) of low-VOC EPS foam.
Image:

The Habitat affiliate makes its own “ICF” foundation walls with rigid foam held in place with wood spacers.

The Habitat affiliate makes its own “ICF” foundation walls with rigid foam held in place with wood spacers.
Image:

The ICF consists of foam forms that are held in place with plastic or metal spacers and reinforced with metal rebar

The ICF consists of foam forms that are held in place with plastic or metal spacers and reinforced with metal rebar
Image:

The ICF foundation wall of this home is covered with metal flashing before the siding is installed.

The ICF foundation wall of this home is covered with metal flashing before the siding is installed.
Image:

The ICF walls of this home are braced to prepare for pouring the concrete

The ICF walls of this home are braced to prepare for pouring the concrete
Image:

The living space in this multistory, multifamily building is thermally insulated from the outside and the unconditioned garage below by insulating above the podium slab

The living space in this multistory, multifamily building is thermally insulated from the outside and the unconditioned garage below by insulating above the podium slab