Research Tracker

Lumileds, LLC will develop structures that will dramatically improve efficiency droop. The improvement in droop will be utilized to achieve higher performing LEDs.

This project will improve the external quantum efficiency (EQE) of amber and red aluminium gallium indium phosphide (AlGaInP)-based LEDs by developing strain-engineered cladding layers to provide enhanced carrier confinement.

the University of Miami, in partnership with Schneider Electric and Lawrence Berkeley National Laboratory, will create a tool for dynamic cooling and airflow optimization that is customized for the design and operational requirements of data centers and computer rooms by integrating several open-source modeling packages: the Modeling Buildings Library/Spawn-of-EnergyPlus for flexible IT equipment and cooling system modeling; LBNLs GenOpt for optimization; and the University of Miamis Fast Fluid Dynamics package for airflow modeling.

As part of an ongoing effort to enhance low-power wireless communication, this project will develop a wireless connectivity module made of radio frequency (RF) hardware and systems software that enables RF connectivity at over 50% lower active power consumption for integration into MELs.

The proposer seeks to assess the prevalence of different space heating systems and the efficacy of known measures that address their most common inefficiencies. The proposer will convene an advisory panel, assess the scope of steam heat as a problem in New York as well as existing measures, and conduct a cost-benefit and impact analysis. The project will complete with the development of proposals for policymakers, industry customers, and potential training programs.

OLEDWorks will reduce OLED manufacturing costs by developing innovative high-performance deposition technology. If OLD costs can be reduced to enable OLED lighting to make up 5% as large a market as LEDs by 2025, OLED lighting will save approximately 10 TWh/year.

This project will demonstrate the installation of innovative technologies to retrofit an existing, low-income, mixed-use multi-unit building in a dense urban setting to become zero net energy (ZNE). Innovative strategies include a rapid new technology discovery and assessment approach, to ensure the most current emerging technologies are incorporated, as well as innovative measurement and verification. These approaches and other ZNE design process innovations will be packaged into an advanced ZNE design methodology for use in the demonstration project as well as broad dissemination to the design and innovation community. Numerous technical innovations and pre-commercial technologies are planned for inclusion including dynamic chromatic glass, heat recovery ventilators, variable refrigerant flow, occupancy based plug-load management, advanced light emitting diode lighting systems and a combined photovoltaic-thermal system.

This project will demonstrate the installation of innovative technologies to retrofit an existing, low-income, mixed-use multi-unit building in a dense urban setting to become zero net energy (ZNE). Innovative strategies include a rapid new technology discovery and assessment approach, to ensure the most current emerging technologies are incorporated, as well as innovative measurement and verification. These approaches and other ZNE design process innovations will be packaged into an advanced ZNE design methodology for use in the demonstration project as well as broad dissemination to the design and innovation community. Numerous technical innovations and pre-commercial technologies are planned for inclusion including dynamic chromatic glass, heat recovery ventilators, variable refrigerant flow, occupancy based plug-load management, advanced light emitting diode lighting systems and a combined photovoltaic-thermal system.

Philips Research North America will develop an innovative LED office lighting system that integrates light delivery, optics, and controls. The office portfolio developed in this project will maximize energy efficiency and occupant health and well-being.

Philips Research North America will develop an innovative LED lighting system for patient rooms. This solution will be energy efficient and will meet all the needs of patients, caregivers, and visitors.

Pacific Northwest National Laboratory (PNNL) has just completed extensive research to determine energy efficiency savings for storm windows. The goal of this project is to obtain residential and possible commercial Unit Energy Savings (UES) measure approval from the Regional Technical Forum (RTF) for interior and exterior low-e storm windows. This work will create the (Simplified Energy Enthalpy Model) SEEM workbook and ProCost model to inform regional savings and cost-effectiveness assumptions, presentation of these data to the RTF in collaboration with RTF staff, and associated documentation.

The project will study the integration trade-offs, cost and energy optimization of daylighting, LED electric lighting, plug load sensors and zonal air plow controls. If widely adopted, the integrated controls package in this project could have savings up to 750 Tbtu per year.

The Levy Partnership, Inc. will develop low-cost, highly efficient comfort system designs to enable affordably built homes to use heat pumps with superior air distribution systems. This demonstration could result in 50% energy savings over 2009 code requirements.

This agreement develops a new tool that integrates moisture and thermal analysis. By integrating these two properties the optimal strategies can be determined for improving envelope design for new construction and retrofit applications.This agreement provides building professionals with a user-friendly engineering software tool at no cost.

This project will further refine a new approach to using mini-split heat pumps in existing homes. The team will focus on using a single, centrally located mini-split heat pump as the primary system, while only using the existing lower efficiency central system as needed.

Sinovia Technologies will combine a barrier film technology with a nanowire transparent conduction film to make a single substrate product for OLED lighting. This technology will improve the efficiency and lower the cost of OLEDs.

This project studies the synergistic interactions of daylighting, plug controls, automated fault detection and diagnostics (AFDD) and HVAC optimization. If widely used, the package of daylighting techniques, plug loads, AFDD and controls for HVAC systems validated in this project could have savings of 756 Tbtu per year.

This project will develop and evaluate cost-effective packages of pre-commercial integrated energy efficiency measures and controls to achieve zero net energy (ZNE) performance for multi-story small commercial offices in San Francisco and Southern California. The packages will target a minimum of 50 percent energy savings when compared to standard building energy use. The packages of energy efficiency measures will be analyzed at Lawrence Berkeley National Laboratory's FLEXLAB, an advanced facility for testing whole-building integrated systems, to develop and validate solutions under varied climate and use conditions. The simulation models will be validated through results from FLEXLAB testing and a 3-story whole-building demonstration pilot located in San Francisco. Data on energy, occupant comfort, and occupant behavior will be analyzed and packaged into best practices to be replicated elsewhere in the State.

This project will develop and evaluate cost-effective packages of pre-commercial integrated energy efficiency measures and controls to achieve zero net energy (ZNE) performance for multi-story small commercial offices in San Francisco and Southern California. The packages will target a minimum of 50 percent energy savings when compared to standard building energy use. The packages of energy efficiency measures will be analyzed at Lawrence Berkeley National Laboratory's FLEXLAB, an advanced facility for testing whole-building integrated systems, to develop and validate solutions under varied climate and use conditions. The simulation models will be validated through results from FLEXLAB testing and a 3-story whole-building demonstration pilot located in San Francisco. Data on energy, occupant comfort, and occupant behavior will be analyzed and packaged into best practices to be replicated elsewhere in the State.

This project will develop an optimal system configuration for smart comfort controlled ceiling fans integrated with learning thermostats. This system will be tested and evaluated for energy performance and occupant acceptance in low income multi-family residential and small commercial buildings in disadvantaged communities in California. This research and development will advance the solution's technology readiness level and support market adoption acceleration.

This project will develop an optimal system configuration for smart comfort controlled ceiling fans integrated with learning thermostats. This system will be tested and evaluated for energy performance and occupant acceptance in low income multi-family residential and small commercial buildings in disadvantaged communities in California. This research and development will advance the solution's technology readiness level and support market adoption acceleration.

This project will develop a low cost smart thermostat unit that will have simple user interface. Though the test sites are low-income and senior housing, this technology could be adapted to other residential sectors. The smart thermostat will understand user preferences and manage indoor conditions to optimize energy use without requiring internet connectivity. HVAC energy use can be traced to three factors: losses in the ducting system, substandard equipment efficiency and occupant settings. Low income households are mostly renters which makes changes to the duct system or HVAC unit not feasible. By providing automatically optimized thermostat settings this project will determine if smart thermostats are a cost effective method to address HVAC energy use in the low-income and senior housing sectors.

This project focuses on establishing a framework and identifying priority R&D needs for coordination with industry, Emerging Technology and market deployment programs. PNNL will develop a white paper evaluating the state of the art of commercially available sensors and controls technology for operations, maintenance, and commissioning applications in residential HVAC. This work assesses technology gaps and market needs, and provides clear recommendations for government action and industry involvement in advancing sensors, controls, diagnostics, and automated fault correction. The task will explore opportunities for industry engagement to gain feedback on report findings, better identify industry development plans, and focus BA/BTO investments.

This project will attempt to measure the impact of lighting on the users of an outdoor lighting space. The experiments will determine the effects of different lighting types on the melatonin levels of the participants. As different CCT light sources will be used, their differing spectral contents can be evaluated to determine the most appropriate light source for implementation in the outdoor environment.

Princeton University will integrate multiple aspects of outcoupling enhancement within one OLED structure to achieve greater than 60% outcoupling efficiency. This development will lead to higher-efficiency OLEDs.