Skip to main content
EERE » BTO » Building America » Solution Center Home » Research Tracker

Research Tracker

This tool is intended for researchers and program managers to quickly find research projects around the country that are relevant to their work. The four organizations who provided content for this purpose represent the largest energy efficient buildings research portfolios in the country. These organizations each provided the content that they were comfortable sharing publically. Therefore, upon clicking on a particular project, it is possible that certain pieces of content are not present. Where possible, a point of contact is provided so that specific questions can be directed to that person. We welcome your comments! If you would like to provide any feedback on this tool (positive or constructive) please email basc@pnnl.gov.

Showing results 1 - 25 of 91

A Renewable Based Direct Current Building Scale Microgrid

This renewable-based direct current (DC) microgrid will connect on-site generation with loads and provide a low cost, energy-efficient solution to save costs. Solar PV will be directly connected to energy-efficient DC lighting, DC energy storage systems, and ventilation on a 380 V DC bus to form a DC building microgrid. This microgrid system proposed for the Honda Distribution Center in Chino, California reduces the need for inverters for PV and rectification equipment in the loads, thus improving the overall utilization of solar energy by 7-10% as compared to conventional AC systems, while lowering component complexity and costs.

Achieving Zero Net Energy in Multi-family Buildings

This project will demonstrate the potential of breakthrough electric water heating and space conditioning technologies as a pathway to zero net energy. The project will explore the complex, interdependent systems in multifamily buildings and how they work together to achieve zero net energy status for the buildings in a cost-effective manner. Four multifamily buildings, designed to be affordable, will be evaluated in various stages of design and development. These buildings will share a goal of all electric zero net energy construction with 100 percent renewable energy generation, and will utilize innovative new heat pump technologies to serve the buildings water heating and/or space conditioning needs.

Advanced Plug Load Controls and Management in the Educational Environment

This project deploys APMD technology over a large sample size, at approximately 55,000 computer workstations at several Community Colleges, and focuses on integrating the technology with facility operations to ensure that they meet the needs of the sites and staff. Key features of the proposed project include outreach and individual education programs to California Community College Districts, evaluation of sites for participation in the project, purchase and installation of APMDs at approved sites, measurement and verification (M&V) activities both pre- and post-APMD implementation at the selected demonstration sites, and stakeholder satisfaction information from demonstration facilities staff and APMD end-users through interviews and surveys.

Automated Cloud-Based Continuously Optimizing Building Energy Management System

The Automated Cloud-based Continuously Optimizing Building Energy Management System (ACCO-BEMS) overcomes limitations of existing energy management systems by automating optimized control of building systems and devices. The technology overcomes limitations of existing energy management systems and eliminates the need for expensive reprogramming needed to implement optimization measures. As such, the technology can co-exist with existing systems in retrofit applications, or it can be implemented as a new installation.

Best-in-Class: Demonstrating Scalable Operational Efficiency through Optimized Controls Sequences and Plug-and-Play Solutions

This project optimizes and simplifies control upgrades to demonstrate energy savings while improving occupant comfort. This demonstration uses automated fault detection and diagnostics and continuous commissioning with the use of advanced measurement and verification procedures. The agreement includes recommendations for strategies, tools, and initiatives to address market barriers and promote large scale market adoption.

Bundle-Based Energy Efficiency Technology Solutions for California (BEETS for California)

This project demonstrates three innovative bundles of pre-commercial technologies. The technology bundles were strategically developed through a systems-level approach to address the most energy-intensive areas in commercial buildings. These include: (1) Chilled Water Plants: Optimized all-variable-speed chilled-water (CHW) plants utilizing alternative refrigerant chillers. (2) Office and Exterior Space LED fixtures with integrated advanced controls, advanced building management system (BMS), and plug load controls controllable for demand response (DR), and off-grid, exterior, LED lighting in the parking lot, and lastly (3) Advanced laboratory ventilation, fume hood exhaust, and direct current (DC) lighting systems.

Climate appropriate HVAC Systems for Commercial Buildings to Reduce Energy Use and Demand

This project will develop and demonstrate a Climate Appropriate Air Conditioning system for commercial buildings. The heart of this system is an intelligent HVAC controller that processes signals from building sensors and system feed-back to maximize system efficiency. This control system will manage two technologies to optimize building energy and peak demand reduction. Getting fresh air into commercial buildings is a code requirement. However, the ingress of hot air into a cooling system and vice versa presents an inefficiency problem. This project will evaluate heat-recovery ventilation (HRV) and indirect evaporative cooling (IEC) to decrease the temperature of the incoming air in the summer and increase it in the winter. Both technologies can be intelligently controlled by the building controller to reduce cooling and heating costs. This project will also research low global warming refrigerants for commercial buildings

Comparing Attic Approaches for Zero Net Energy Homes

The project will focus on the performance of different attic assemblies and their associated heating, ventilating and air conditioning (HVAC) systems. Field measurements of attic and HVAC system performance will be conducted in two new high performance homes in California with sealed and insulated attics. One home will be built to be about 30 percent better than Title 24 and the other will be a ZNE home. The attic insulation approach will be a new lower-cost approach using blown insulation that does not use expensive spray-foam. The results of the measurements will be used directly to provide technical support for potential changes to Title 24 and provide information to contractors and builders on sealed and insulated attic performance and alternative approaches.

Complete and Low Cost Retail Automated Transactive Energy System (RATES)

This project will develop and pilot-test a complete, low cost, and standards based Retail Automated Transactive Energy System (RATES), and behind the meter energy management solution, that minimizes the cost and complexity of customer participation in energy efficiency programs, while maximizing the potential of large numbers of small loads to improve system load factor, shave peaks, integrate renewable generation and otherwise provide low opportunity-cost resources to the grid.

Complete and Low Cost Retail Automated Transactive Energy System (RATES)

This project will develop and pilot-test a complete, low cost, and standards based Retail Automated Transactive Energy System (RATES), and behind the meter energy management solution, that minimizes the cost and complexity of customer participation in energy efficiency programs, while maximizing the potential of large numbers of small loads to improve system load factor, shave peaks, integrate renewable generation and otherwise provide low opportunity-cost resources to the grid.

Cost- and Energy-Efficient Attic Designs for CA Homes

Three different attic designs will be refined, tested, evaluated, and demonstrated in new home construction. The team will recommend the best of these approaches to home builders addressing cost-effectiveness and energy-efficiency. The baseline for comparison will be current energy efficiency code practices for attic construction involving ventilated, uninsulated attics containing code compliant ducts. The team will evaluate the new design approaches analytically at the start of the project. Researchers will assess approaches that include methods to produce sealed, insulated attics, as well as, standard vented attics, both of which have been demonstrated and are in limited use in the market today but currently add considerable cost to builders. The team will employ new and novel installation methods and materials that have the potential for energy savings on par with ducts in the conditioned space, but at a cost similar to current practice.

Costs and Benefits of Community vs. Individual End-Use for Solar Water Heating

This project will assess factors affecting the scale of solar water heating (SWH) installations, such as system cost, performance, and reliability and scale. Such factors impact whether a project is undertaken at the individual or community level. The project team will consider different SWH technologies, installation types and financing mechanisms and develop a model to address questions on investing in solar water heating and how investments can be focused to maximize uptake of SWH. The team aims to quantify state-level energy and emissions impacts of the reduction in natural gas usage from solar water heating installations.

Customer-Centric Approach to Scaling IDSM Retrofits

This project will develop and demonstrate an approach to scale residential retrofits for disadvantaged communities that will focus on customer-centric solutions. This project will develop and demonstrate an innovative approach, focusing on energy efficient retrofit packages that are non-intrusive to occupants and have the potential of reducing energy use by 30 to 40 percent.

Customer-centric Demand Management using Load Aggregation and Data Analytics

This project will demonstrate how a large number of small electric loads, each impacted by and tuned to individual customer preferences can provide load management for both utilities and the California Independent System Operator (California ISO). The recipient will work with an extensive spectrum of leading product providers covering all major distributed energy resources (DERs), such as Nest (thermostats), ThinkEco (plug loads), Honda, BMW (auto), EGuana (smart Inverter) and Ice Energy (Thermal Storage). A variety of price signals will be tested for Time-of-Use customers such as Critical Peak Pricing and Demand Rate. The project will use deep analytics to evaluate individual customer preferences for demand management using microdata from devices and aggregate the responses to meet grid needs at different distribution and transmission levels.

Demonstration of Affordable, Comfortable, Grid Integrated Zero Net Energy Communities

This project will demonstrate cost-competitive ZNE design strategies that combine occupant needs with technology solutions to create new pathways for residential ZNE communities. The project's goals are cost effectiveness for the customer, affordability, overcoming customer apprehension, establishing a track record of new technology for builders, enabling distribution grid integration, creating a planning process for ZNE communities, evaluating community solar and evaluating the impact of future changes to ZNE cost effectiveness. This project will also aim to understand the operation and energy use of the unregulated loads.

Developing Flexible, Networked Lighting Control Systems That Reliably Save Energy

The recipient will develop low-cost lighting components with open communication interfaces that allow seamless integration into whole-building control and automation systems. The project will target future California Building Energy Efficiency Standards (Title 24), and establish methods by which the site-specific configuration and operation of networked lighting controls systems can be effectively addressed, and more easily implemented by the marketplace

Development and Testing of the Next Generation Residential Space Conditioning System for California

This project will develop a next-generation residential space-conditioning system optimized for California climates. The advanced efficiency solutions integrated into the HVAC system will include: variable-capacity compressor and variable-speed fans using state-of-the-art inverter technology; integrated ventilation to harness fresh air for "free cooling;" intelligent dual-fuel technology to decrease energy cost and empower consumers to choose between electricity and natural gas; zonal control to prevent conditioning of unoccupied rooms; demand-response interactivity to grid flexibility and reliability; advanced fault detection and diagnostics to ensure proper installation, operation, and maintenance; and alternative refrigerants for improved operation and significant reductions in the potential for global warming. How the Project Lead

Direct Current as an Integrating and Enabling Platform

This project will research DC and AC-DC hybrid systems in buildings and develop resource information, end-use templates, and building guidelines that could improve the ability to achieve zero net energy buildings. The feasibility, costs, benefits, market barriers, and customer and education needs will be assessed, including guidelines for residential and small commercial buildings.