Library

Document describing advancement in factory built housing innovations.

Paper discussing innovative strategies for improving ventilation systems in high-rise apartment buildings, focusing on compartmentalization and controlling stack effect pressures to enhance indoor air quality and energy efficiency published in the Proceedings of the Eighth Conference on Building...

Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.

A report that evaluates the force it takes to crack stucco of various thicknesses.

Report describing information for builders and retrofitters about eliminating hazards and coincidental energy losses that come from attached garages.

Brochure intended to provide readers with a working knowledge of residential heating and cooling duct systems.

Research study discussing how housewraps restrict or permit the passage of water molecules based on size, but cannot control the direction in which the water vapor molecules move.

Report describing the recommended best practices to achieve energy savings without compromising health or safety.

Document providing a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the hot and humid climate.

Document illustrating some analysis concepts that are proven to be effective and reliable in analyzing the transient energy usage of advanced energy systems as well as of entire houses.

Document detailing how to build radon-resistant homes.

Document with information from a workshop addressing framing materials for residential buildings in California. A copy of the document can be requested at the resource link, and an online copy of the document can be found by searching for it on the California Energy Commission's Library Online...

Part 2 of an article discussing how to maximize two-pipe steam systems for resident space heating.

Report investigating the nature, strength, and durability of connections between high performance dwellings and developments.

Report outlining how conditioned crawlspaces perform better than vented crawlspaces in terms of safety, health, comfort, durability and energy consumption.

Study describing efforts and outcomes in developing color-pigmented roofing products with coatings to increase solar reflectance.

Information sheet with construction details, pros and cons of insulated concrete forms.

A research paper exploring the installation and mounting of solar photovoltaic (PV) panels on rooftops and the challenges faced by system designers and installers.

Study presenting generalized results regarding the effect of surface orientation on annual incident solar radiation for locations in the United States.

Presentation about results from an insulating concrete form energy efficiency study in Knoxville, TN.

Report providing guidelines and procedures to determine whether damaged or potentially damaged buildings are safe for use after wind storms or floods, or if entry should be restricted or prohibited.

Article describing the effective R-values of various subslab insulation products, including foil bubble pack.

Journal article describing energy impacts from shade trees and forests and solar heating and air infiltration.

Results from a research program testing airtightness, implications of air leakage and contaminant reduction over the garage-to-house interface.

Report describing the use of fresh air ventilation systems to eliminate the formation of icicles and ice dams along the eaves of roofs.

Document providing guidance about building healthy homes using building science principles.

A report describing the development of a methodology to properly size heating, ventilation, and air-conditioning (HVAC) equipment for concrete homes in the US and Canada.

Report presenting system design packages for cold and mixed-humid climates.

Article describing the effect metal roofs have on thermal performance in hot-humid climates.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Article describing how the configuration of surrounding buildings affects the wind loads on a hip roof in a low-rise building.

Report that describes BSC's Houses That Work II (HTWII) climate-specific technical resource, beginning with an overall HTWII introduction and four sections explaining the four most important hygro-thermal climate regions: Hot-Humid, Mixed-Humid, Cold, and Hot-Dry/Mixed-Dry.

Document from IBHS explaining how to inspect homes for earthquake preparedness and retrofit solutions for homes that have suffered structural damage as a result of earthquakes.

Paper describing vegetation impacts on cooling load for buildings.

Standards for requirements, performance, construction, workmanship and others for structural-use panels.

Fact sheet describing how to prepare for a natural disaster and assemble a disaster supply kit.

Table calculating friction losses of PVC pipe fittings.

Table calculating friction losses for PVC pipe by length.

A report presenting alternative approaches for reducing the costs of roof-mounted, grid-connected photovoltaic (PV) systems.

Report describing the testing of various siding materials for their ability to resist bullets from small firearms.

Technical paper covering the retrofit of unreinforced masonry buildings.

Report describing how to construct a frost protected shallow foundation (FPSF) as a practical alternative to a deeper, more-costly foundation in cold regions with seasonal ground freezing and the potential for frost heave.

Description of California Senate Bill SB 1898, which requires the sale of new seismic gas shutoff devices sold in California to be certified by the State Architect.

Report providing information based on research and case studies, to remodelers and consumers about opportunities to increase home energy performance.

Image depicting damage from termites in weatherboard cladding.

Report outlining a case study about a building project in the hot-humid climate zone.

Report developed for Habitat for Humanity about lessons learned from demonstration retrofit projects undertaken by Habitat for Humanity affiliates in New York, Maryland, and Pennsylvania; with building systems consulting and technical assistance provided by Steven Winter Associates.

Report sumarizing a workshop to initiate a professional discussion about eventual benefits of the application of massive technologies in US buildings.

Technical research paper explaining how thermal mass influences heating and cooling energy needs.