Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 1 - 26 of 26

Author(s)
Dentz Jordan,
Conlin Francis,
Holloway Parker,
Podorson David,
Varshney Kapil
Organization(s)
Advanced Residential Integrated Energy Solutions Collaborative,
ARIES,
Levy Partnership
Publication Date
Description
Report describing two retrofit duct sealing techniques - manually-applied sealants and injecting a spray sealant, that were implemented in several low-rise multi-unit buildings in North Carolina.
Author(s)
Baker Peter,
Eng P,
Lepage R
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.
Author(s)
Cort Katherine A,
Culp Thomas D
Organization(s)
Pacific Northwest National Laboratory,
PNNL,
Birch Point Consulting,
BPC
Publication Date
Description
Research study evaluating energy savings and cost effectiveness of installing low-emissivity (low-e) storm windows over existing windows in residential homes in all climate zones.
Author(s)
Burdick Arlan
Organization(s)
IBACOS
Publication Date
Description
Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.
Author(s)
Rudd,
Prahl
Organization(s)
ABT Systems,
IBACOS
Publication Date
Description
Report identifying two barriers that limit the ability of builders to explore opportunities for higher levels of energy efficiency in housing: the use of duct system materials that inherently achieve airtightness and are right-sized for low-load houses, and, the ability to air seal fire separation...
Author(s)
Cummings James B,
Withers Charles R
Organization(s)
Building America Partnership for Improved Residential Construction,
BA-PIRC,
Florida Solar Energy Center,
FSEC
Publication Date
Description
Research study describing experiments run in an unoccupied 1600 square foot house to evaluate the delivered performance as well as the relative performance of a SEER 21 variable capacity heat pump versus a SEER 13 heat pump.
Author(s)
Yee S,
Milby M,
Baker J
Organization(s)
Partnership for Advanced Residential Retrofit,
PARR
Publication Date
Description
Study investigating homeowner measure package choices in the Illinois Home Performance with ENERGY STAR program compared to cost-optimal choices determined through Building Energy Optimization (BEopt) modeling software.
Author(s)
Sparn B,
Hudon K,
Earle Lieko,
Booten Chuck,
Tabares-Velasco Paulo Cesar,
Barker Greg M,
Hancock C E
Organization(s)
National Renewable Energy Laboratory,
NREL,
Mountain Energy Partnership
Publication Date
Description
Research report presenting results of short term tests on measures used in an energy efficiency retrofit project in California.
Author(s)
Brand Larry
Organization(s)
Partnership for Advanced Residential Retrofit,
PARR,
Gas Technology Institute,
GTI Energy
Publication Date
Description
This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.
Author(s)
Arena Lois
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
National Renewable Energy Laboratory,
NREL
Publication Date
Description
Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.
Author(s)
Grin,
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.
Author(s)
Lstiburek
Organization(s)
Building Science Corporation
Publication Date
Description
Report that provides information and specifications to anyone that is attempting to air seal existing attics.
Author(s)
Aldrich Robb
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA
Publication Date
Description
This document addresses adding—or improving—mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes either directly or by dilution. This report discusses where, when, and how much ventilation is appropriate in a home, including some...
Author(s)
Dentz,
Podorson,
Varshney
Organization(s)
ARIES,
National Renewable Energy Laboratory,
Levy Partnership
Publication Date
Description
This report investigates whether mini-split heat pumps can live up to their potential for one market segment: multifamily retrofits.
Author(s)
Building Science Corporation
Organization(s)
BSC
Publication Date
Description
Information sheet about reservoir claddings.
Author(s)
German,
Hoeschele
Organization(s)
ARBI,
Davis Energy Group
Publication Date
Description
Report evaluating mechanical AC precooling strategies in homes as a method for improving the load factor by shifting cooling operation from on-peak to off-peak hours.