Library

Report aiming to "de-mystify" technology and economic considerations of residential PV systems.

Website providing information about how to keep the properties rat-free and address conditions that can lead to rats.

Webpage explaining how to mitigate heat loss through roofs for ice dam prevention.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Website describing the RELi rating system and leadership standard that takes a holistic approach to resilient design.

Document containing some of the basic characteristics for energy performance, durability, thermal comfort, and indoor air quality that should be met in all high performance homes.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

Website with information and research about residential hot water distribution systems.

Fact sheet describing residential tornado safe room doors.

Fact sheet describing methods for flashing and air-sealing windows and doors.

Report describing how to construct a frost protected shallow foundation (FPSF) as a practical alternative to a deeper, more-costly foundation in cold regions with seasonal ground freezing and the potential for frost heave.

Document describing precast concrete earthquake design considerations including connections, detailing, and forces, among others.

Website providing an introduction to the concepts and principles of seismic design.

Newsletter containing five articles focused on seismic retrofitting.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

A website discussing the use of consumer-grade small electric wind systems such as turbines to lower energy costs.

Report identifying the important aspects of building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

A research paper exploring the design, installation, repair and maintenance of solar water and pool heating technologies.

Specifications to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.

Website providing information on all types of pest management for multi-family housing.

Research study providing a comparison of selected retrofit activity typically done, versus that same retrofit activity approached from an integrated high performance remodeling and quality management perspective.

The 2017 publication update to the SEAOC Wind Committee and SEAOC Solar Photovoltaic Systems Sub-Committee's 2012 report.

Fact sheet describing recommendations for exceeding NFIP regulatory requirements for new construction and for repairs, remodeling, and additions, including building foundations, enclosures below the Base Flood Elevation (BFE), use of nonstructural fill, use of space below the BFE, utilities...

Research project evaluating the pre-and post-retrofit energy consumption of a marine climate retrofit, compare actual energy use to original predictions, and identify opportunities for cost savings in other similar retrofits in this climate.

Research study determining how well high performance envelope and innovative cooling system interact to cost effectively reduce cooling energy use in this hot-dry climate.

A guide for homeowners on determining the risks from tornadoes and hurricanes and selecting a safe room type and location, as well as providing detailed plans for safe room construction.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

FSEC certification and testing page for solar systems.

Report describing use of the Energy in Modular (EMOD) method to design, produce, and deliver affordable, net-zero energy, low-carbon, and healthier buildings through industrialized (factory) construction of modular buildings; modeling of whole buildings and subassemblies of components, pods, panels...

Fact sheet poster describing the energy efficiency and comfort benefits of thin triple-pane windows as compared to standard triple-pane and double-pane windows.

Article describing how an affordable multifamily building achieved energy savings for the same cost as code-minimum construction.

Report presenting information that aids qualified architects and engineers in the identification of the best available refuge areas in existing buildings for sheltering in place during a tornado.

Paper describing testing for the first of a series of six near net-zero-energy test houses, using the results to work towards the construction of a true net-zero-energy house.

Information sheet with methods for constructing or retrofitting basements to reduce moisture issues.

Presentation describing the challenges of insulating an existing basement, presented to the Building America residential energy-efficiency stakeholder meeting.

Fact sheet describing the certification requirements for structural design and methods of construction in V Zones; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Products and specification for a State of California-compliant earthquake-actuated automatic gas shutoff valve.

Article describing the EPA WaterSense program, process, and benefits.

Fact sheet describing four different efficient hot water delivery (HWD) systems, the trunk-and branch, core, whole-house manifold, and recirculation, with emphasis on system schematics, piping materials, and regulations to design and verify the systems.

Fact sheet describing water-efficient landscaping through informed landscape design and plant selection, outlining considerations for climate, soil, and maintenance, as well as emphasizing the benefits of native and drought-tolerant plants.

Fact sheet describing the implementation of water metering and submetering measures in residential properties, particularly multifamily buildings, to enhance water efficiency, usage tracking, and compliance with relevant regulations; It outlines how to build and verify water meters and submeters to...

Website providing a description of the WaterSense labeled homes program and a checklist of mandatory requirements for homes to be labeled under the U.S. Environmental Protection Agency's (EPA's) WaterSense program, Version 2.0.

Guide designed to help builders better understand and meet the hot water delivery system criteria as specified in EPA's WaterSense New Home Specification.

An article written by Don Jackson of The Journal of Light Construction on how to detail brick veneer siding wall.

Webinar presenting best practices in HVAC design and commissioning

Conference paper presented at the 8th International Conference on Thermal Performance of Exterior Envelopes of Whole Buildings describing moisture from basements and crawlspaces as a source of indoor humidity and providing recommendations for finishing below-grade spaces to limit potential indoor...

Article discussing structural and nonstructural building components and illustrates a variety of wind-induced damages, including wind-driven rain infiltration.

Fact sheet poster describing and comparing the energy-saving and comfort benefits of window attachment options such as low-emissivity storm windows, automated blinds, cellular shades, and solar screens, etc.

Report describing Net Zero house design with sloped roof assemblies.