Library

Standards book discussing the minimum standards of total system balance of HVAC systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Report providing guidance on wet floodproofing crawlspaces, unfinished basements, and garages.

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Article by the Canadian Government on attic ventilation and considerations for moisture and ice dams.

Report covering interior energy retrofits of masonry buildings.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Fact sheet describing basement insulation considerations.

Information sheet describing techniques for insulating basements.

YouTube channel featuring 90+ videos to educate Bay Area homeowners and contractors about seismic retrofitting, including information for various home and construction types.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2021 and is available to order at the referenced link.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Web based tool providing decision-making guidance for selecting wall assembly components.

Training manual on how to locate ducts within conditioned space and compact design.

Article describing the principle of capillarity in construction materials.

Report describing strategies to improve the aging steam heating systems in New York City to improve energy efficiency, reduce oil and gas usage, and cut maintenance costs.

Article describing how closed crawlspaces can do "double duty" by controlling moisture and providing energy savings.

Information guide describing issues with concrete floors, in multiple climate zones.

Guidance from Zero Energy Project on construction techniques for warmer climates, such as home orientation, and insulation requirements.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Information sheet about crawlspace insulation, including installation details.

Report covering exterior energy retrofits of masonry buildings.

Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.

Report analyzing results in crawlspace retrofits in multifamily buildings.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...

Article explaining what a continuous load path is and the key connection points that make it up.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Article describing methods to manage moisture, rainwater, and vapor in basements and crawlspaces.

Handbook providing guidance on the design and construction of foundations for homes, including insulation, air sealing, and water management details for basements, crawlspaces, and slabs.

Article describing what the building codes say about frost-protected shallow foundations as a cost-saving alternative to conventional concrete foundations.

Guides describing frost-protected shallow foundations as an alternative method for building an energy-efficient foundation for a house in a cold climate that uses less concrete and saves on labor.

Article describing frost-protected shallow foundations with construction drawing details.

Brochure describing FEMA documents and foundation tips for floodproofing homes.

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

Article describing how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.

Blog entry describing methods for insulating basement walls on the interior or exterior.

An article and video of a breakdown on the preparation and installation of basement insulation.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Report outlining results from a 2005 hygrothermal pilot study in the South.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Article describing walls and moisture development on them.

Information sheet providing links and resources for insulating basements in cold climates.