Library

Brochure on specifications for solar thermal systems.

Report describing the cost-effectiveness and performance of all-electric, zero net energy multifamily buildings in California, detailing technical challenges and providing recommendations for design, construction, codes, standards, and operations to support future projects.

Report covering the fire performance of combustible cladding over combustible insulation.

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

Informational guide describing the design, installation, and maintenance best practices and technical considerations for integrated Heat Pump Water Heaters in single-family and multifamily new construction.

Report describing the advantages and best practices for installing heat pump water heaters (HPWH), highlighting their improved energy efficiency, reliability, and critical considerations such as condensate management, proper sizing, and optimal installation location to enhance performance and...

The Heat Pump Water Heater Installation Tool helps contractors, installers, and homeowners through the decision-making process for heat pump water heater (HPWH) product selection and installation, with a focus on overcoming installation barriers.

Report describing the significant potential for energy use reductions through heat pump water heaters, which have been a crucial part of Northwest power plans for decades and have recently achieved substantial savings with new integrated models and climate specifications.

Report describing the features, benefits, and best practices for the design and installation of heat pump water heaters in new low-rise multifamily buildings, highlighting their efficiency, reliability, and contribution to decarbonization goals.

Report describing a laboratory assessment that provides insights into space requirements and venting strategies for heat pump water heaters (HPWH) to enhance retrofit installations and provide actionable guidance for manufacturers, designers, engineers, installers, and owners.

Guide providing detailed selection and installation instructions for heat pump water heaters.

Provides consumers with general information on solar water heating systems and how to select a contractor.

Case study of new home construction in the hot-dry and mixed-dry climate zones.

Best Practices document providing an introduction to current photovoltaic and solar thermal building practices.

Report on a project that enhanced the HWSIM distribution system model to more accurately model pipe heat transfer.

Article describing the factors that can lead to inefficient hot water distribution systems in homes.

Guide describing how to choose energy-efficient water heaters, including heat pump models, with tips on installation, rebates, and incentives for maximizing energy savings.

ENERGY STAR webpage describing how a heat pump water heater works.

Report describing the identification of barriers and proposed practical solutions for the design, installation, and market adoption of heat pump water heaters in new low-rise multifamily housing, focusing on studio and one-bedroom units.

Factsheet describing re-siding retrofits containing exterior insulation and window upgrades aimed at improved energy savings and comfort.

Journal article presenting modeling of residential gas water heaters via dynamic simulation models to determine the effect of the pilot light on their annual energy consumption.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Report describing the performance, economics, space heating impacts, and user satisfaction of heat pump water heaters (HPWHs) in the upper Midwest, based on a field study and survey of participants in the MECA HPWH incentive program.

Fact sheet describing principles of insulating steam distribution and condensate return lines as an effective way to prevent energy loss.

Report describing the objective evaluation of space conditioning interactions between heat pump water heaters and home heating systems during winter 2016-2017, revealing a smaller than anticipated impact on space conditioning loads.

This webpage provides an interactive walk-through of the installation of a heat pump water heater in a home in Massachusetts, including how-to videos of the installation, video interviews with the homeowners, installer, and utility program partners, and visual tours of the home before and after...

Report covering reservoir claddings, back ventilation and vapor throttles.

Article providing guidance for installing manufactured stone veneer, including information on rainscreens.

Report summarizing results of testing emerging combo water heating technologies under controlled laboratory operations, that differentiate the performance of the various packaged equipment configurations being offered.

Report describing research conducted to support California’s Title 24, Part 6 Building Energy Efficiency Standards by analyzing the impact of installation location and ventilation on heat pump water heater (HPWH) performance, emphasizing the need for proper installation to maximize efficiency...

Report identifying the target market for solar water heaters and potential pathways and cost/performance targets that must be met for these systems to realize large energy savings.

This webpage provides an interactive walk-through of the installation of a heat pump water heater in a home in Maine, including how-to videos of the installation, video interviews with the homeowners, installer, and utility program partners, and visual tours of the home before and after installation...

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

Document pertaining to design and application guidance for combination space and tankless domestic hot water heating systems used in residential buildings, based on field evaluation, testing, and industry meetings.

Report describing the installation and operation of forced-air heating and domestic hot water combi systems in residential homes.

Document developed to help residential builders and retrofitters transition from tank-type water heaters to tankless water heaters.

Web resource that lays out the pre-work considerations, methods and finishes for installing mechanical insulation.

This paper discusses model validation using data from three thermosiphon systems.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Study in which a central heat pump water heater system was monitored in detail and used to create a model for assessing similar systems in various climates.

Report providing information to researchers, utility program managers, and building owners interested in controlling heating energy waste and improving resident comfort.

Article investigating how a linear input/output relationship can be used as a simple model of the performance of a combination hydronic heating system over heating only, DHW only, and combined loads.

A study on how fires spread through exterior building envelopes with discussion on how fires propagate in a rain screen cavity.

Report describing the key findings from the first third-party field validation of 120-volt heat pump water heater (HPWH) technology, addressing the significant barriers to their adoption and emphasizing their potential role in reducing carbon emissions from residential water heating.

Report describing a laboratory assessment on the performance of Rheem 120-volt heat pump water heaters (HPWH), aimed at identifying optimal installation locations for these new "plug-in" models based on comprehensive testing under various conditions.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Technical report describing the Re-Side Right initiative by the New Jersey Institute of Technology's Building America research team that proposes enhancing home efficiency during the re-siding process by incorporating an insulating layer that acts as both an air barrier and water resistive barrier...

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

Report discussing instrumentation methods and field operation characteristics of two GSHPs in test houses, including a comparison between the manufacturers listed COP values and the COPs calculated from field data.