Organization(s)
ABTCO Vinyl Siding
Publication Date
Description
Vinyl siding estimating and installation guide for vinyl siding products.
This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.
Showing results 1 - 23 of 23
Organization(s)
Hammer & Hand
Publication Date
Description
This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
This report will review, and summarize the current state of understanding and research into enclosures with higher thermal resistance, so-called “High-R Enclosures.” Recommendations are provided for further research.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. The Guide is...
Organization(s)
Home Innovation Research Labs
Publication Date
Description
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...
Organization(s)
Building Science Corporation
Publication Date
Description
Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA
Publication Date
Description
Research report anayzing the results of a large retrofit project, turining an old school into near zero energy consumption apartments in Greenfield MA.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Article describing strategies for reducing the risk of ice dam formation on roofs in winter.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Information about dense pack, cellulose insulation.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report on problems and solutions with EIFS stucco wall cladding systems.
Organization(s)
BSC
Publication Date
Description
Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Article outlining the casuses and solutions for ice dam problems.
Organization(s)
Florida Solar Energy Center,
FSEC
Publication Date
Description
Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.
Organization(s)
Ply Gem Siding Group
Publication Date
Description
Siding installation guide for Ply Gem Siding Group products.
Organization(s)
Building Science Corporation,
BSC,
U.S. Department of Energy,
DOE
Publication Date
Description
Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.
Organization(s)
Home Innovation Research Labs
Publication Date
Description
The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...
Organization(s)
Florida Solar Energy Center,
FSEC
Publication Date
Description
Report highlighting the evaluation methods used and extent of wind washing found in a study analyzing wind washing in thirty-two two-story homes.
Organization(s)
Florida Solar Energy Center,
FSEC
Publication Date
Description
Report presenting the results of a study evaluating retrofit solutions for addressing the effects of wind washing on homes.
Organization(s)
BARA
Publication Date
Description
Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.
Organization(s)
Wisconsin Focus on Energy
Publication Date
Description
High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.