Library

City of Plymouth webpage providing information on the Plymouth Community Center Project.

Research study exploring a test method measuring air leakage between units through common surfaces and air infiltration across exterior, noncommon surfaces of the enclosure.

Report reviewing the design and the first four months of energy performance of a near zero energy project home in Callaway, Florida during the second half of 2008.

Research report describing study of exterior retrofit approach for air sealing, insulating, and water management conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Information sheet about how to reduce thermal bridging in walls.

Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.

Information sheet with the definition and uses for a raised truss.

Technical report describing the Re-Side Right initiative by the New Jersey Institute of Technology's Building America research team that proposes enhancing home efficiency during the re-siding process by incorporating an insulating layer that acts as both an air barrier and water resistive barrier...

Research study about two test homes that are examined with the goal of providing case studies that could be applied to other similar New England homes.

Data tables on U.S. renewable energy consumption and general trends in the market for renewable energy.

Report researching cost- effective solution packages for significant energy efficiency and indoor air quality improvements masonry multifamily urban buildings.

Website describing the U.S. Department of Energy's residential buildings program.

Report describing a study using parametric computer simulations of 112 single-family and 63 multi-family residential building prototypes to quantify the contributions of building components such as roofs, walls, windows, infiltration, outside air, lighting, equipment, and people to the aggregate...

Presentation describing RESNET grading criteria for insulation installation.

Report describing how modification of model specifications to include guidance on energy efficiency measures can create a greater level of consistency in executing energy efficiency retrofit measures across the multiple regions where a developer may work.

Report describing the costs, benefits, and challenges of attic insulation retrofits in HUD-code manufactured homes.

Guide on retrofitting insulation in cavities.

Report about a deep energy retrofit Cool Energy House.

Report describing how to construct a frost protected shallow foundation (FPSF) as a practical alternative to a deeper, more-costly foundation in cold regions with seasonal ground freezing and the potential for frost heave.

Information sheet about insulation retrofits for the hot-dry climate zones.

Information sheet about exterior insulation in the hot-dry climate zones.

Report covering non-combustible continuous exterior insulation and non-combustible roof venting.

Article describing how insulating and air sealing unfinished attic spaces can lead to reduced energy bills in some homes.

Report describing construction of test homes in Atlanta, GA meeting Building America savings targets and serving as a basis of design for other homes Martin Dodson plans to build within the Serenbe community.

Report evaluating the renovation of a 5,800-ft2, multiuse facility located in St. Petersburg, on the west coast of central Florida, in the hot-humid climate.

High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Tool determining the most economical and efficient photovoltaic array location and position.

Document providing incident solar radiation data and window overhang sizing guidance for multiple locations across the U.S.

Handheld solar site analysis tool capturing whole-horizon images for a site and generating shading analysis reports.

Factsheet describing the use of rigid foam insulation to meet energy efficiency requirements and minimize fire risks.

Job Process sheet for the manufactured housing industry showing how to split and notch insulation batts to fit around electrical boxes and wiring in a factory production environment.

SPFA website homepage.

Literature review from NFPA on the use of insulation to protect the piping in home fire sprinkler systems from freezing conditions.

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...

Information sheet about buried ducts.

Report providing information based on research and case studies, to remodelers and consumers about opportunities to increase home energy performance.

Report following the evolution of the construction quality process from its development for new homes to its application construction of a HPH with enhanced specifications, and its application in a crawlspace renovation.

Document serving as a starting point that features initial tools and resources for teams to start collaborating to continually improve the energy efficiency and durability of new houses.

Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.

Article providing fundamental information and recommendations for shading windows for energy savings.

Research study determining how well high performance envelope and innovative cooling system interact to cost effectively reduce cooling energy use in this hot-dry climate.

Research study making several recommendations to whole-home program designers and implementers for improving the cost effectiveness and reach of whole-home programs.

Brochure describing insulation approaches for homes with slab-on-grade floors.

Brochure with information about how to select and install house wrap and other weather-resistive barriers.

Study on the effects of wind, radiation, and pressure on apparent temperature.

Article describing a research study exploring how effective interior insulation systems are at keeping basements dry and warm.