Library

Report providing information about improving the energy efficiency and long-term durability of the buildings that are being reconstructed post Katrina in New Orleans.

Report providing information about improving the energy efficiency and long-term durability of the buildings that are being reconstructed post Katrina in New Orleans.

Article investigating how a linear input/output relationship can be used as a simple model of the performance of a combination hydronic heating system over heating only, DHW only, and combined loads.

Technical report describing research aimed to provide window manufacturers with foundational guidance for installing windows in walls with continuous insulation (CI), addressing critical aspects such as evaluating common installation methods, establishing acceptance criteria for window performance...

Article outlining moisture accumulation in open cell spray polyurethane foam.

Research study exploring a test method measuring air leakage between units through common surfaces and air infiltration across exterior, noncommon surfaces of the enclosure.

Report reviewing the design and the first four months of energy performance of a near zero energy project home in Callaway, Florida during the second half of 2008.

Research report describing study of exterior retrofit approach for air sealing, insulating, and water management conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Information sheet about how to reduce thermal bridging in walls.

Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.

Information sheet with the definition and uses for a raised truss.

Technical report describing the Re-Side Right initiative by the New Jersey Institute of Technology's Building America research team that proposes enhancing home efficiency during the re-siding process by incorporating an insulating layer that acts as both an air barrier and water resistive barrier...

Research study about two test homes that are examined with the goal of providing case studies that could be applied to other similar New England homes.

This study used an advanced airflow, energy and humidity modeling tool to evaluate the potential for residential mechanical pre-scooling strategies to reduce peak electriciy demand.

Fact sheet describing best practices in installing leak-free refrigerant systems, including specifics on creating flare joints and brazed joints, pressure testing, vacuum testing, and charging the system with refrigerant.

Report researching cost- effective solution packages for significant energy efficiency and indoor air quality improvements masonry multifamily urban buildings.

Technical report describing the research and development of the Ventilation-Integrated Comfort System (VICS) which is a specifically designed, energy-efficient solution that seamlessly integrates with low-capacity, ducted heating, and cooling systems, offering controllable, balanced energy recovery...

Website describing the U.S. Department of Energy's residential buildings program.

Report describing information from DOE about rules and standards for residential air conditioners and heat pumps.

Webpage describing a DOE Cold Climate Heat Pump Challenge. The challenge engages industry partners and focuses around the Cold Climate Heat Pumps, a more environmental and efficient heating alternative to traditional heating.

Paper covering a parametric study of foundation heat exchanger-based ground source heat pump systems for several house configurations in a range of European locations, with an emphasis on determining feasible combinations.

Report discussing instrumentation methods and field operation characteristics of two GSHPs in test houses, including a comparison between the manufacturers listed COP values and the COPs calculated from field data.

Report describing a study using parametric computer simulations of 112 single-family and 63 multi-family residential building prototypes to quantify the contributions of building components such as roofs, walls, windows, infiltration, outside air, lighting, equipment, and people to the aggregate...

Presentation describing RESNET grading criteria for insulation installation.

Report describing how modification of model specifications to include guidance on energy efficiency measures can create a greater level of consistency in executing energy efficiency retrofit measures across the multiple regions where a developer may work.

A quick-reference guide advising homeowners on how to elevate and protect outdoor HVAC equipment from high winds and floods.

Report describing the costs, benefits, and challenges of attic insulation retrofits in HUD-code manufactured homes.

Guide on retrofitting insulation in cavities.

Article describing how replacing permanent split capacitor (PSC) motors with electronically commutated motors (ECM) can boost bottom line for HVAC contractors as well as improve customer comfort and satisfaction.

Report about a deep energy retrofit Cool Energy House.

Report describing how to construct a frost protected shallow foundation (FPSF) as a practical alternative to a deeper, more-costly foundation in cold regions with seasonal ground freezing and the potential for frost heave.

Information sheet about insulation retrofits for the hot-dry climate zones.

Information sheet about exterior insulation in the hot-dry climate zones.

Report covering non-combustible continuous exterior insulation and non-combustible roof venting.

Web page providing an overview of room-level air conditioning systems such as window units and mini-splits.

Article describing how insulating and air sealing unfinished attic spaces can lead to reduced energy bills in some homes.

Report describing construction of test homes in Atlanta, GA meeting Building America savings targets and serving as a basis of design for other homes Martin Dodson plans to build within the Serenbe community.

Report evaluating the renovation of a 5,800-ft2, multiuse facility located in St. Petersburg, on the west coast of central Florida, in the hot-humid climate.

High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Fact sheet outlining the research behind how smart ventilation controls boost energy efficiency and indoor air quality, including research findings from seasonal temperature, timer, and real-time weather-based controls showing that all three systems showed potential for energy savings while...

Factsheet describing the use of rigid foam insulation to meet energy efficiency requirements and minimize fire risks.

Job Process sheet for the manufactured housing industry showing how to split and notch insulation batts to fit around electrical boxes and wiring in a factory production environment.

SPFA website homepage.

Literature review from NFPA on the use of insulation to protect the piping in home fire sprinkler systems from freezing conditions.

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...