Library

Article investigating how a linear input/output relationship can be used as a simple model of the performance of a combination hydronic heating system over heating only, DHW only, and combined loads.

A study on how fires spread through exterior building envelopes with discussion on how fires propagate in a rain screen cavity.

Standards for requirements, performance, construction, workmanship and others for structural-use panels.

Report providing information on performance of mortars and concrete containing PCMs.

Blog article describing considerations for how to use trees for shading to reduce cooling energy demand.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

City of Plymouth webpage providing information on the Plymouth Community Center Project.

Database of approved products that meet the requirements of the High Velocity Hurricane Zone.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

Webpage describing a DOE Cold Climate Heat Pump Challenge. The challenge engages industry partners and focuses around the Cold Climate Heat Pumps, a more environmental and efficient heating alternative to traditional heating.

Paper covering a parametric study of foundation heat exchanger-based ground source heat pump systems for several house configurations in a range of European locations, with an emphasis on determining feasible combinations.

DOE report characterizing the installed base of windows and window coverings, and how users operate window coverings in order to enable precise quantification of energy savings.

Report describing the testing of various siding materials for their ability to resist bullets from small firearms.

Website providing an introduction to the concepts and principles of seismic design.

Report from FEMA describing techniques for floodproofing structures.

Description webpage providing information about home fire safety during sever weather for consumers.

Website providing the pros and cons of different siding materials for home building, including wood, vinyl, fiber cement, stucco, brick, metal, and stone.

Study conducted to help determine cost-effective solutions for heating and cooling houses that are designed to be energy efficient.

Report informing building stakeholders about the risks a snow event poses to their buildings, preventative measures to take before the snow season, and actions that should be taken before, during, and after a snow event.

A research paper exploring the design, installation, repair and maintenance of solar water and pool heating technologies.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2022, and is available for preview and purchase at the reference link. There are also other versions of...

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2023, and is available for preview and purchase at the reference link. There are also other versions of...

ASTM standard for wood-composite decking and guardrail materials under a variety of tests, including fire performance and UV resistance. Available for preview and purchase at the reference link.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

ASTM standard test method for surface burning response of different building materials which was published in the year 2022 and is available for preview and purchase at the reference link.

ASTM standard test method for testing the surface burning response of different building materials which was published in the year 2023 and is available for preview and purchase at the reference link.

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Webpage for searching all of ASTM's standards, books, journals, and technical articles.

Document providing information on correct storage techniques for lumber to manage moisture.

A research paper discussing the use of foundation heat exchangers for ground source heat pump systems in European climates.

The Technician's Guide equips practitioners with the knowledge to properly implement all of the measurement procedures required in the HVAC QI Specification.

Fact sheet describing the test procedure for wind and wind driven rain resistance of discontinuous roofing systems.

DOE-sponsored report describing the experimental design and results of testing the energy performance of Hunter Douglas double-cell cellular shades under various control schemes in the Pacific Northwest National Laboratory’s Lab Homes.

Projectile missile testing of various wall panel configuration to understand how the different wall constructions would perform when struck with wind driven debris from a hurricane.

Conference paper summarizing the relative performance of currently available Heat Pump Water Heaters (HPWH) models, the energy implications of different installation locations (garage, basement, or conditioned space) and ducting configurations (exhaust ducting, full ducting, or no ducting), as well...

Information sheet disucssing myths about insulated concrete forms.

Webpage providing guidance on the use of thermal mass with passive heating and cooling strategies.

Technical research paper explaining how thermal mass influences heating and cooling energy needs.

Design guide providing technical information regarding building with thermal mass.

Article detailing a case study in which thermal mass was used as part of an overall Net Zero solution for a university building.

Guide from Energy Star on smart thermostats and offering some guidance for choosing one.

This report describes the results of a multiyear research project that investigated the energy savings attributable to thermostatic radiator valves (TRVs) installed on one-pipe steam distribution systems.

Article from Purdue University on the potential for white paint technology to lower air conditioning usage requirements.

Information sheet about types and installation of insulation.