Library

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Guide providing information on controlling attic ductwork sweating.

Fact sheet providing guidance on alternative building materials and techniques in coastal environments, including Engineered Wood Products, SIPs, ICFs, Prefabricated Shear Walls and Moment Frames, Sprayed Closed-Cell Foam Insulation, Advanced Wall Framing, and Modular Houses; also published in FEMA...

Fact sheet describing a novel, simplified air delivery system using a plug-and-play model that features 3-inch diameter flexible ducts, efficient fittings, and a simplified installation process that resulted in successful market engagement through commercialization.

Document about development of recommendations to help residential HVAC designers select optimal supply inlet size and system operating conditions to maintain good thermal comfort in low heating and cooling load homes.

Research study using modeling to determine optimal combination(s) of components/pumps, high efficiency heat sources, plumbing configurations and controls that result in the highest overall efficiency for a hydronic system.

A fact sheet educating the public on how to appropriately ground portable generators and the hazards associated with their use.

Standards for paints and coatings.

A study on how fires spread through exterior building envelopes with discussion on how fires propagate in a rain screen cavity.

Standards for requirements, performance, construction, workmanship and others for structural-use panels.

Report providing information on performance of mortars and concrete containing PCMs.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

City of Plymouth webpage providing information on the Plymouth Community Center Project.

Database of approved products that meet the requirements of the High Velocity Hurricane Zone.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

DOE case study findings on raised ceiling interior duct systems.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

Report including an overview of the buried duct research and information the retrofit methodology used to install and test the three existing duct systems, including short- and long-term data collection.

Document presenting results from testing prototype HVAC duct system designs that would locate the entire length of duct work within the air and thermal barriers of the building envelope. These include one that incorporated a high-side supply register, one that utilized a single soffit located within...

Presentation providing information about correctly installing ductwork in new and existing homes.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

Report describing the testing of various siding materials for their ability to resist bullets from small firearms.

Research study about a high performance retrofit of an existing brick building (a former convent) into condominiums, all affordable housing.

Report describing procedures for increasing sensible efficiencies through increased flow rates across the air handling unit and increased indoor coil sizes.

Report about cost effective energy-efficient upgrades that can be implemented in the hot, dry Southwest climate.

Document reviewing current and potential ventilation technologies for residential buildings with particular emphasis on North American climates and construction.

Article describing how insulating and air sealing unfinished attic spaces can lead to reduced energy bills in some homes.

Website providing an introduction to the concepts and principles of seismic design.

Report from FEMA describing techniques for floodproofing structures.

Description webpage providing information about home fire safety during sever weather for consumers.

Report describing development of a package of energy efficiency measures to achieve 60% energy savings in a test house.

Website with consumer information about duct cleaning.

Website providing the pros and cons of different siding materials for home building, including wood, vinyl, fiber cement, stucco, brick, metal, and stone.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Report informing building stakeholders about the risks a snow event poses to their buildings, preventative measures to take before the snow season, and actions that should be taken before, during, and after a snow event.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2022, and is available for preview and purchase at the reference link. There are also other versions of...

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2023, and is available for preview and purchase at the reference link. There are also other versions of...

ASTM standard for wood-composite decking and guardrail materials under a variety of tests, including fire performance and UV resistance. Available for preview and purchase at the reference link.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

ASTM standard test method for surface burning response of different building materials which was published in the year 2022 and is available for preview and purchase at the reference link.

ASTM standard test method for testing the surface burning response of different building materials which was published in the year 2023 and is available for preview and purchase at the reference link.

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Webpage for searching all of ASTM's standards, books, journals, and technical articles.