Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 1 - 29 of 29

Affordable Solid Panel "Perfect Wall" System

Author(s)
Schirber Tom,
Jacobson Rolf,
Mosiman Garrett,
Handeen Daniel,
Huelman Patrick H
Organization(s)
University of Minnesota,
UMN,
U.S. Department of Energy,
DOE,
NothernSTAR
Publication Date
Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Building America Building Science Advisor

Author(s)
Oak Ridge National Laboratory,
U.S. Department of Energy
Organization(s)
ORNL,
DOE
Publication Date
Web based tool providing decision-making guidance for selecting wall assembly components.

Expert Meeting Report: Cladding Attachment Over Exterior Insulation

Author(s)
Baker Peter
Organization(s)
Building Science Corporation,
BSC,
U.S. Department of Energy,
DOE
Publication Date
Report about an expert meeting focused on issues surrounding cladding attachment and performance of walls with exterior insulating sheathing.

Extended Plate Wall System Expands Adoption of High-R Envelope Solutions

Author(s)
Burkett Lena,
Gunderson Patti
Organization(s)
U.S. Department of Energy,
DOE
Publication Date
Fact sheet describing the Extended Plate Wall (EPW) a system that incorporates a 2-inch layer of foam plastic insulative sheathing within the framing for top and bottom plates, streamlining air sealing, window and door installation, weather resistive barrier application, and cladding attachment for...

Exterior Insulation Implications on Heating and Cooling in Cold Climates

Author(s)
Herk Anastasia,
Poerschke Andrew
Organization(s)
Integrated Building and Construction Solutions,
IBACOS
Publication Date
The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

External Insulation of Masonry Walls and Wood Framed Walls

Author(s)
Baker Peter
Organization(s)
Building Science Corporation,
BSC,
National Renewable Energy Laboratory,
NREL
Publication Date
Research study developing baseline engineering analysis to support the installation of thick layers of exterior insulation (2 in. to 8 in.) on existing masonry walls and wood framed walls.

High-R Walls for New Construction Structural Performance: Wind Pressure Testing

Author(s)
Desjarlais Andre O,
Kochkin Vladimir
Organization(s)
NAHB Research Center,
National Renewable Energy Laboratory,
NREL
Publication Date
Report with test results that serve as a baseline of data for further material tests of other high-R wall systems and for comparison to whole-house wind pressure testing.

Measure Guideline: Installing Rigid Foam Insulation on the Interior of Existing Brick Walls

Author(s)
Natarajan Hariharan,
Puttagunta Srikanth,
Klocke Steve
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
National Renewable Energy Laboratory,
NREL,
Steven Winter Associates,
SWA
Publication Date
Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Measure Guideline: Internal Insulation of Masonry Walls

Author(s)
Schumacher Christopher,
Ueno Kohta,
Straube John
Organization(s)
Building Science Corporation,
BSC,
National Renewable Energy Laboratory,
NREL
Publication Date
Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Moisture Control for Residential Buildings

Author(s)
Lstiburek Joseph W
Organization(s)
Building Science Corporation,
BSC,
U.S. Department of Energy,
DOE
Publication Date
Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Moisture Management for High R-Value Walls

Author(s)
LePage Robert,
Schumacher Christopher,
Lukachko Alex
Organization(s)
Building Science Corporation,
BSC
Publication Date
Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

Moisture Performance of High-R Wall Systems

Author(s)
Kochkin Vladimir,
Shah Nay B
Organization(s)
Home Innovation Research Labs,
HIRL,
U.S. Department of Energy,
DOE
Publication Date
The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Performance of Windows in Walls With Continuous Insulation

Author(s)
Peavey John,
Shah Nay B
Organization(s)
Home Innovation Research Labs,
HIRL,
U.S. Department of Energy,
DOE,
National Renewable Energy Laboratory,
NREL
Publication Date
Technical report describing research aimed to provide window manufacturers with foundational guidance for installing windows in walls with continuous insulation (CI), addressing critical aspects such as evaluating common installation methods, establishing acceptance criteria for window performance...

Predicting Envelope Leakage in Attached Dwellings

Author(s)
Faakye Omari,
Arena Lois,
Griffiths Dianne
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
National Renewable Energy Laboratory,
NREL
Publication Date
Research study exploring a test method measuring air leakage between units through common surfaces and air infiltration across exterior, noncommon surfaces of the enclosure.

Providing a Thermal Break in Gut Rehabs

Author(s)
Steven Winter Associates,
Consortium for Advanced Residential Buildings
Organization(s)
CARB,
SWA
Publication Date
Information sheet about how to reduce thermal bridging in walls.

Structural Testing of Screws through Thick Exterior Insulation

Author(s)
Tatara Jun,
Ricketts Lorne
Organization(s)
RDH Building Science Inc.,
Canadian Conference on Building Science and Technology,
CCBST
Publication Date
Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.