Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 51 - 84 of 84

Glazing Hazard Mitigation

Author(s)
Smith,
Renfroe
Organization(s)
NIBS
Publication Date
Article describing the fundamentals and basics of glazing hazard mitigation practices for both new and existing buildings.

How to Anchor Furniture to a Wall

Author(s)
Wirecutter Staff
Organization(s)
New York Times
Publication Date
Installation tips and product suggestions for mounting hardware.

Industry Becoming More Comfortable with Excess Flow Valves

Author(s)
Pipeline & Gas Journal
Organization(s)
Pipeline & Gas Journal
Publication Date
Article describing excess flow valves installed on gas lines to shut-off natural gas flow to a home in the event that a gas line is severed due to an earthquake, natural disaster, earthquake, etc.

Keeping The Heat In - Chapter 6: Basement insulation

Author(s)
Natural Resources Canada
Organization(s)
Natural Resources Canada
Publication Date
Information sheet providing links and resources for insulating basements in cold climates.

Laboratory Evaluation of Energy Recovery Ventilators

Author(s)
Kosar
Organization(s)
BA-PIRC,
Gas Technology Institute
Publication Date
Report targeting the growing number of homes utilizing deep retrofit measures and new construction practices to realize sufficiently lower infiltration levels that require mechanical ventilation as prescribed by ASHRAE Standard 62.2.

Measure Guideline: Passive Vents

Author(s)
Berger David,
Neri Robin
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA
Publication Date
Report describing the use of passive vents as a source of outdoor air in multifamily buildings.

Measured Performance of Heat Pump Clothes Dryers

Author(s)
Martin Eric,
Sutherland Karen,
Parker Danny
Organization(s)
FSEC
Publication Date
Repor ourlining testing results from a 53 home monitored sample, long-term energy use of electric resistance clothes dryers.

New LSSJ Hanger Strengthens Jack Rafter Connections

Author(s)
Simpson Strong Tie
Organization(s)
Simpson Strong Tie Structural Engineering Blog
Publication Date
Article describing a steel connector product for jack rafter connections.

No Sweat, BSI-094

Author(s)
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Guide providing information on controlling attic ductwork sweating.

Performance profiles of exterior fire protective building envelopes

Author(s)
Jarnskjold Tobias,
Jensen Geir,
Knudsen Atle
Organization(s)
Edition Diffusion Presse Sciences,
EDP Sciences
Publication Date
A study on how fires spread through exterior building envelopes with discussion on how fires propagate in a rain screen cavity.

Phased Retrofits in Existing Homes in Florida Phase I: Shallow and Deep Retrofits

Author(s)
Parker Danny,
Sutherland Karen,
Chasar Dave,
Montemumo Joseph,
Amos Bryan,
Kono Jamie E
Organization(s)
Florida Solar Energy Center,
FSEC
Publication Date
Report describing research on how to reduce energy used by residential homes by applying shallow and deep retrofits to an existing home.

Phased Retrofits in Existing Homes in Florida Phase II: Shallow Plus Retrofits

Author(s)
Sutherland Karen,
Parker Danny,
Martin Eric,
Chasar Dave,
Amos Bryan
Organization(s)
Florida Solar Energy Center,
FSEC,
Building America Partnership for Improved Residential Construction,
BA-PIRC
Publication Date
Report describing single retrofit measures applied to shallow retrofitted homes that could be used to refine the deep retrofit package.

Prepare Home Fuel Tanks for Possible Flooding

Author(s)
Minnesota Pollution Control Agency
Organization(s)
Minnesota Pollution Control Agency
Publication Date
Webpage for home owners describing ways to prepare indoor and outdoor fuel tanks to avoid displacement during floods.

Public Housing: A Tailored Approach to Energy Retrofits

Author(s)
Dentz Jordan,
Conlin Francis,
Podorson David,
Alaigh Kunal,
Davis T
Organization(s)
Advanced Residential Integrated Energy Solutions Collaborative,
ARIES,
Levy Partnership,
National Renewable Energy Laboratory,
NREL
Publication Date
Report presenting ways public housing authorities (PHAs) can develop packages of energy efficiency retrofit measures the PHAs can cost-effectively implement with their own staff in the normal course of housing operations at the time when units are refurbished between occupancies.

Realizing Resilience through Incentives: Results from the Institute’s 2016 Symposia

Author(s)
Tobias Leanne,
Blais Neil,
Schneider Philip J
Organization(s)
National Institute of Building Sciences
Publication Date
Article describing key takeaways from two symposia held during Building Innovation 2016: The National Institute of Building Sciences Fourth Annual Conference and Expo, including that resilience can be affordable and cost-effective.

Rebuilding After a Wildfire

Author(s)
Federal Emergency Management Agency
Organization(s)
FEMA
Publication Date
Fact sheet describing conditions for wildfire, how a home catches fire, how to create a survivable space, the ideal fire resistant home.

Revised Analysis of Efficiency Standards for Pool Pumps and Motors, and Spas

Author(s)
Fischel Ben,
Steffensen Sean
Organization(s)
California Energy Commission,
CEC
Publication Date
This report discusses proposed updates to the pool pumps and motors, and portable electric spas standards in the Appliance Efficiency Regulations (California Code of Regulations, Title 20, Sections 1601 to 1609). These proposed updates are part of the 2012 Appliance Efficiency Rulemaking, Phase I...

Seismic Design Principles

Author(s)
Lorant
Organization(s)
NIBS
Publication Date
Website providing an introduction to the concepts and principles of seismic design.

Seismic Safety of the Building Envelope

Author(s)
Arnold Chris
Organization(s)
Whole Building Design Guide,
WBDG,
National Institute of Building Sciences,
NIBS
Publication Date
Article outlining the key issues related to the protection of the building envelope against seismic forces.

Standard Guide for Seismic Risk Assessment of Buildings, ASTM E2026-16a

Author(s)
American Society for Testing and Materials,
ASTM International
Organization(s)
ASTM
Publication Date
Guide providing guidance on conducting seismic risk assessments for buildings. The link goes to the current version of this standard, which was published in the year 2016 and is available for preview and purchase. Previous editions of this standard were published in the year 2016, 2007, and 1999...

Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments, ASTM E2557-16a

Author(s)
ASTM International
Organization(s)
ASTM
Publication Date
Practice providing a guide or standard to undertake seismic risk assessment of properties. The current version of the standard was published in the year 2016 and is available for preview and purchase at the link. Previous versions of the standard were published in the years 2016 and 2007, and are...

Standard Practice for the Installation of Mounting Flange Windows into Walls Utilizing Foam Plastic Insulating Sheathing (FPIS) with a Separate Water-Resistive Barrier (WRB), FMA/AAMA/WDMA 500-16

Author(s)
Fenestration Manufacturers Association,
American Architectural Manufacturers Association,
Window & Door Manufacturers Association
Organization(s)
FMA,
AAMA,
WDMA
Publication Date
Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

Sun Control and Shading Devices

Author(s)
Don Prowler and Joseph Bourg
Organization(s)
Whole Building Design Guide
Publication Date
Article providing fundamental information and recommendations for shading windows for energy savings.

Swimming Pool and Spa Introduction

Author(s)
Alliance for Water Efficiency
Organization(s)
Alliance for Water Efficiency
Publication Date
Web page providing information about water use in pools and spas and tips for how to increase water efficiency.

Wall Bracing Made Easy

Author(s)
Bajnai Charles S
Organization(s)
Chesterfield County VA Building Department
Publication Date
A guide describing how to do wall bracing calculations and evaluations.

Wall Performance by Design: Role of Rainscreens in Moisture Management

Author(s)
Building Enclosure Moisture Management Institute
Organization(s)
BEMMI
Publication Date
A presentation about the need for rainscreens including the damage water and moisture ingress into a home’s siding and framing can cause, and ways to design a resilient wall that drains and ventilates well.

Waste Reduction Model (WARM) Version 12

Author(s)
U.S. Environmental Protection Agency
Organization(s)
EPA
Publication Date
Information sheet with the Waste Reduction Model (WARM), designed to help solid waste planners and organizations track and voluntarily report greenhouse gas (GHG) emissions reductions from several different waste management practices.