Organization(s)
Vinyl Siding Institute
Publication Date
Description
Publication with installation guidance for vinyl siding.
This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.
Showing results 1 - 50 of 50
Organization(s)
Structural Building Components Association,
SBCA
Publication Date
Description
Article describing vapor retarder requirements in the International Residential Code and International Building Code 2021.
Organization(s)
ABTCO Vinyl Siding
Publication Date
Description
Vinyl siding estimating and installation guide for vinyl siding products.
Organization(s)
University of Minnesota,
USDOE Office of Energy Efficiency and Renewable Energy
Publication Date
Description
Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...
Organization(s)
Green Building Advisor
Publication Date
Description
Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.
Organization(s)
Green Building Advisor
Publication Date
Description
Article about different types of weather resistant barrier.
Organization(s)
PNNL
Publication Date
Description
Case study about Artistic Homes of Albuquerque, New Mexico, the first home builder in the United States to offer true net zero energy construction to the average home buyer on every home it builds.
Organization(s)
Hammer & Hand
Publication Date
Description
This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.
Organization(s)
Building Science Corporation
Publication Date
Description
A book about structurally insulated panels.
Organization(s)
Pacific Northwest National Laboratory,
PNNL,
Oak Ridge National Laboratory,
ORNL
Publication Date
Description
A guidebook helping builders design and construct homes that are among the most energy efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. Measures described in this guide can help builders in the hot-humid climate...
Organization(s)
Pacific Northwest National Laboratory,
PNNL,
Oak Ridge National Laboratory,
ORNL
Publication Date
Description
Report providing builders in the hot-dry and mixed-dry climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.
Organization(s)
ORNL,
DOE
Publication Date
Description
Web based tool providing decision-making guidance for selecting wall assembly components.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Research study describing a number of promising foundation and basement insulation strategies that can meet the requirement for better thermal control in colder climates while enhancing moisture control, health, and comfort.
Organization(s)
American Society of Heating Refrigerating and Air-Conditioning Engineers,
ASHRAE
Publication Date
Description
Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.
Organization(s)
BSC
Publication Date
Description
Brochure explaining the essential basis for advanced framing and some of the more common advanced framing details.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report covering insulating crawlspaces.
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. The Guide is...
Organization(s)
Home Innovation Research Labs
Publication Date
Description
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...
Organization(s)
Home Innovation Research Labs
Publication Date
Description
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report covering exterior energy retrofits of masonry buildings.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report on problems and solutions with EIFS stucco wall cladding systems.
Organization(s)
BSC
Publication Date
Description
Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report about an expert meeting focused on issues surrounding cladding attachment and performance of walls with exterior insulating sheathing.
Organization(s)
NREL,
USDOE Office of Energy Efficiency and Renewable Energy
Publication Date
Description
Fact sheet describing the Extended Plate Wall (EPW) a system that incorporates a 2-inch layer of foam plastic insulative sheathing within the framing for top and bottom plates, streamlining air sealing, window and door installation, weather resistive barrier application, and cladding attachment for...
Organization(s)
IBACOS
Publication Date
Description
The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.
Organization(s)
Building Science Corporation,
BSC,
National Renewable Energy Laboratory,
NREL
Publication Date
Description
Research study developing baseline engineering analysis to support the installation of thick layers of exterior insulation (2 in. to 8 in.) on existing masonry walls and wood framed walls.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Journal article describing lessons learned from updating a 16-year-old deep-energy retrofit.
Organization(s)
CARB,
Steven Winter Associates,
SWA
Publication Date
Description
Report about development of effective strategies to reduce the overall building energy use in line with Building America goals in this modestly priced market rate project.
Organization(s)
BSC
Publication Date
Description
Information sheet briefly summarizing double stud with spray foam wall construction including the advantages and disadvantages of this construction strategy.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report that considers a number of promising wall systems that can meet the requirement for better thermal control.
Organization(s)
NAHB Research Center,
National Renewable Energy Laboratory
Publication Date
Description
Report providing testing methodology to evaluate structural rim header designs over openings up to 6 ft. wide and applicable to one- and two-story homes.
Organization(s)
NAHB Research Center,
National Renewable Energy Laboratory
Publication Date
Description
Report with test results that serve as a baseline of data for further material tests of other high-R wall systems and for comparison to whole-house wind pressure testing.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report detailing the design and construction of 10 new houses under the Wyandotte Neighborhood Stabilization Program 2.
Organization(s)
BSC
Publication Date
Description
Information sheet summarizing ICF wall construction including the advantages and disadvantages of this construction strategy.
Organization(s)
BSC
Publication Date
Description
Article explaining installing cavity insulation.
Organization(s)
Vinyl Siding Institute
Description
A guide for users and energy raters of insulated siding as home insulation.
Organization(s)
Home Energy Magazine
Publication Date
Description
Article describing how insulated siding can save homeowners energy by providing continuous exterior insulation.
Organization(s)
Knauf
Description
Website providing information about Knauf Insulation.
Organization(s)
Ply Gem Siding Group
Publication Date
Description
Siding installation guide for Ply Gem Siding Group products.
Organization(s)
Building Science Corporation,
BSC
Publication Date
Description
Report describing wall assemblies that use layers of rigid exterior insulation thicker than 1-½ inch and require a secondary cladding attachment location exterior to the insulation.
Organization(s)
Building Science Corporation
Publication Date
Description
Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.
Organization(s)
Home Innovation Research Labs
Publication Date
Description
The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
National Renewable Energy Laboratory,
NREL
Publication Date
Description
Report describing evaluation of several configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies.
Organization(s)
Steven Winter Associates,
SWA
Publication Date
Description
Report providing guidance to air sealing multifamily homes.
Organization(s)
Home Innovation Research Labs,
USDOE Office of Energy Efficiency and Renewable Energy
Publication Date
Description
Technical report describing research aimed to provide window manufacturers with foundational guidance for installing windows in walls with continuous insulation (CI), addressing critical aspects such as evaluating common installation methods, establishing acceptance criteria for window performance...
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
National Renewable Energy Laboratory,
NREL
Publication Date
Description
Research study exploring a test method measuring air leakage between units through common surfaces and air infiltration across exterior, noncommon surfaces of the enclosure.
Organization(s)
LBNL
Publication Date
Description
Report describing a study using parametric computer simulations of 112 single-family and 63 multi-family residential building prototypes to quantify the contributions of building components such as roofs, walls, windows, infiltration, outside air, lighting, equipment, and people to the aggregate...
Organization(s)
FMA,
AAMA,
WDMA
Publication Date
Description
Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...