Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 1 - 11 of 11

Author(s)
Baechler Michael C,
Gilbride Theresa L,
Hefty Marye G,
Cole Pam C,
Adams Karen T,
Butner Ryan S,
Ortiz S J,
Love Pat M
Organization(s)
Pacific Northwest National Laboratory,
PNNL,
Oak Ridge National Laboratory,
ORNL
Publication Date
Description
Report describing measures that builders in mixed-humid climates can use to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.
Author(s)
Christian Jeffrey E,
Bonar Jacob
Organization(s)
Oak Ridge National Laboratory,
ORNL
Publication Date
Description
Presentation about building highly efficient, affordable homes that will achieve 40% whole-house energy savings in mixed-humid climates.
Author(s)
California Energy Commission,
Enermodal Engineering Limited
Organization(s)
CEC,
EEL
Publication Date
Description
Document with information from a workshop addressing framing materials for residential buildings in California. A copy of the document can be requested at the resource link, and an online copy of the document can be found by searching for it on the California Energy Commission's Library Online...
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. The Guide is...
Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Description
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...
Author(s)
Baker Peter
Organization(s)
Building Science Corporation,
BSC,
National Renewable Energy Laboratory,
NREL
Publication Date
Description
Research study developing baseline engineering analysis to support the installation of thick layers of exterior insulation (2 in. to 8 in.) on existing masonry walls and wood framed walls.
Author(s)
Joseph Lstiburek
Organization(s)
Building Science Corporation
Publication Date
Description
Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.
Author(s)
Building Science Corporation
Organization(s)
BSC,
National Renewable Energy Laboratory,
NREL
Publication Date
Description
Report that describes BSC's Houses That Work II (HTWII) climate-specific technical resource, beginning with an overall HTWII introduction and four sections explaining the four most important hygro-thermal climate regions: Hot-Humid, Mixed-Humid, Cold, and Hot-Dry/Mixed-Dry.
Author(s)
Shapiro Carl,
Aldrich Robb,
Arena Lois
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
National Renewable Energy Laboratory,
NREL,
Steven Winter Associates,
SWA
Publication Date
Description
Report describing procedures for increasing sensible efficiencies through increased flow rates across the air handling unit and increased indoor coil sizes.