Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 1 - 30 of 30

2021 IBC and IRC Adopt Improved Vapor Retarder Requirements

Author(s)
Crandell Jay H
Organization(s)
Structural Building Components Association,
SBCA
Publication Date
Article describing vapor retarder requirements in the International Residential Code and International Building Code 2021.

ABTCO Estimating and Installation Guide

Author(s)
ABTCO Vinyl Siding
Organization(s)
ABTCO Vinyl Siding
Publication Date
Vinyl siding estimating and installation guide for vinyl siding products.

All About Water-Resistive Barriers

Author(s)
Holladay
Organization(s)
Green Building Advisor
Publication Date
Article about different types of weather resistant barrier.

Best Practices Manual

Author(s)
Hammer & Hand
Organization(s)
Hammer & Hand
Publication Date
This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.

Building America Building Science Advisor

Author(s)
Oak Ridge National Laboratory,
U.S. Department of Energy
Organization(s)
ORNL,
DOE
Publication Date
Web based tool providing decision-making guidance for selecting wall assembly components.

Building in Extreme Cold, BSI-031

Author(s)
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Cladding Attachment Over Thick Exterior Insulated Sheathing

Author(s)
Baker Peter,
Eng P,
Lepage R
Organization(s)
Building Science Corporation,
BSC
Publication Date
Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Construction Guide to Next Generation High Performance Walls in Climate Zones 3-5 - Part I: 2x6 Walls

Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. The Guide is...

Construction Guide to Next Generation High Performance Walls in Climate Zones 3-5 - Part II: 2x4 Walls with 1” - 1.5” Exterior Insulative Sheathing

Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Construction Guide: Next Generation High Performance Walls in Climate Zones 3-5 - Part 2: 2x4 Walls with 1” to 1.5” Exterior Insulative Sheathing

Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Construction Guide: Next Generation High Performance Walls in Climate Zones 3-5 - Part I: 2x6 Walls

Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

Effect of Cladding Systems on Moisture Performance of Wood Frame Walls in a Mixed-Humid Climate

Author(s)
Drumheller S Craig,
Carll Charles G
Organization(s)
NAHB Research Center,
Home Innovation Research Labs,
Forest Products Laboratory,
FPL,
U.S. Department of Agriculture Forest Service,
USDA Forest Service
Publication Date
The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

EIFS - Problems and Solutions, BSD-146

Author(s)
Lstiburek
Organization(s)
Building Science Corporation,
BSC
Publication Date
Report on problems and solutions with EIFS stucco wall cladding systems.

FAQs -- After Gutting a Flooded Home

Author(s)
Louisiana State University College of Agriculture
Organization(s)
LSU AgCenter
Publication Date
Webpage from LSU AgCenter answering frequently asked questions after gutting a flooded home, including mitigation strategies for future floods.

Fastening Furring Strips to a Foam-Sheathed Wall

Author(s)
Holladay
Organization(s)
Green Building Advisor
Publication Date
Information sheet about what length screws should be used, and how closely to space the screws when fastening furring strips to a foam-sheathed wall.

Flame-Spread Ratings

Author(s)
Louisiana Office of State Fire Marshall
Organization(s)
Louisiana Office of State Fire Marshall
Publication Date
Site showing flame spread ratings and definitions for common building materials.

Mastic Home Exteriors Installation Guide

Author(s)
Ply Gem Siding Group
Organization(s)
Ply Gem Siding Group
Publication Date
Siding installation guide for Ply Gem Siding Group products.

Moisture Control for Residential Buildings

Author(s)
Joseph Lstiburek
Organization(s)
Building Science Corporation,
BSC,
U.S. Department of Energy,
DOE
Publication Date
Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Plaster and Drywall Assemblies Manual

Author(s)
Fowler Mark,
Stanley Bryan,
Coats Darin
Organization(s)
Technical Services Information Bureau,
Walls & Ceilings
Publication Date
Manual covering design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with info on continuous insulation, air barriers, rain screens, fire and sound ratings, etc.

Standard Practice for the Installation of Mounting Flange Windows into Walls Utilizing Foam Plastic Insulating Sheathing (FPIS) with a Separate Water-Resistive Barrier (WRB), FMA/AAMA/WDMA 500-16

Author(s)
Fenestration Manufacturers Association,
American Architectural Manufacturers Association,
Window & Door Manufacturers Association
Organization(s)
FMA,
AAMA,
WDMA
Publication Date
Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

Stucco that Works

Author(s)
DeKorne
Organization(s)
DeKorne
Publication Date
Information sheet describing correct application of stucco.

They All Laughed, BSI-026

Author(s)
Lstiburek
Organization(s)
BSC,
Building Science Corporation
Publication Date
Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.