Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 401 - 450 of 777

HVI Airflow Test Procedure

Author(s)
Home Ventilating Institute
Organization(s)
HVI
Publication Date
Publication specifying HVI’s prescriptive procedures for testing and rating airflow of residential ventilation products in accordance with ANSI consensus standards.

IAQ Guidelines for Occupied Buildings under Construction

Author(s)
Sheet Metal and Air Conditioning Contractors’ National Association
Organization(s)
Sheet Metal and Air Conditioning Contractors’ National Association
Publication Date
Book providing project management guidance in maintaining satisfactory indoor air quality (IAQ) of occupied buildings undergoing renovation or construction.

Ice Dams, BSD-135

Author(s)
Straube
Organization(s)
Building Science Corporation,
BSC
Publication Date
Article outlining the casuses and solutions for ice dam problems.

ICF Wall Construction

Author(s)
Building Science Corporation
Organization(s)
BSC
Publication Date
Information sheet summarizing ICF wall construction including the advantages and disadvantages of this construction strategy.

Improved Modeling of Residential Air Conditioners and Heat Pumps for Energy Calculations

Author(s)
Cutler Dylan,
Winkler Jon,
Kruis Neal,
Christensen Craig,
Brandemuehl Michael J
Organization(s)
National Renewable Energy Laboratory,
NREL,
University of Colorado,
CU
Publication Date
Report presenting improved air conditioner (AC) and heat pump (HP) modeling methods in the context of whole-building simulation tools.

Improvements in Fan Motor Efficiency Could Yield Big Savings

Author(s)
Holliday,
Martin
Organization(s)
Green Building Advisor
Publication Date
Article in Energy Design Update describing the cost and savings benefits of electronically commutated motors (ECMs) for HVAC equipment.

Improving Gas Furnace Performance: A Field and Laboratory Study at End of Life

Author(s)
Brand Larry,
Yee S,
Baker J
Organization(s)
Partnership for Advanced Residential Retrofit,
PARR
Publication Date
Report examining the impacts that common installation practices and age- induced equipment degradation may have on the installed performance of natural gas furnaces, as measured by steady-state efficiency and AFUE.

Improving Recessed Lighting

Author(s)
Pacific Northwest National Laboratory
Organization(s)
PNNL
Publication Date
Report providing information about techniques and approaches to improve the efficiency of recessed lighting.

Indoor Air Quality in 24 California Residences Designed as High-Performance Homes

Author(s)
Less,
Mullen,
Singer,
Walker
Organization(s)
Lawrence Berkeley National Laboratory
This research study used pollutant measurements, home inspections, diagnostic testing and occupant surveys to assess IAQ in 24 new or deeply retrofitted homes designed to be high performance green buildings in California.

Indoor Airflow – Perfect Balance vs. Door Undercut

Author(s)
Guertin Mike
Organization(s)
Fine Homebuilding Magazine
Publication Date
Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Indoor airPLUS Construction Specifications Version 1 (Rev. 04)

Author(s)
U.S. Environmental Protection Agency
Organization(s)
EPA
Publication Date
Document outlining specifications that were developed by the U.S. Environmental Protection Agency (EPA) to recognize new homes equipped with a comprehensive set of indoor air quality (IAQ) features.

Inspecting the Dryer Exhaust

Author(s)
Nich,
Gromicko
Organization(s)
International Association of Certified Home Inspectors
Publication Date
Article describing the correct installation of clothes dryer exhaust ducts.

Installing and Operating an Efficient Swimming Pool Pump

Author(s)
U.S. Department of Energy
Organization(s)
DOE
Publication Date
You can save energy and maintain a comfortable swimming pool temperature by using a smaller, higher efficiency pump and by operating it less.

Investigation of Potential Benefits of Revising Exception 1 under “FLORIDA BUILDING CODE, ENERGY CONSERVATION, Section 101.4.7.1.1 Duct Sealing upon Equipment Replacement.”

Author(s)
McIlvaine Janet E R,
Beal David
Organization(s)
Florida Solar Energy Center,
FSEC
Publication Date
Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

IRC FAQ: Conditioned Attics, GM-0905

Author(s)
Building Science Corporation
Organization(s)
BSC
Publication Date
Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

Is There a Downside to High-MERV Filters?

Author(s)
Springer
Organization(s)
Home Energy Magazine
Publication Date
Information sheet about efficiency and health benefits of MERV filters.

JM Spider® Drill & Fill Installation Guide

Author(s)
Johns Manville
Organization(s)
Johns Manville
Publication Date
The purpose for this document is to provide basic guidance on the use of proven installation techniques that can be used by installers to help ensure correct “dense pack” application of JM Spider® in drill & fill applications.

Keeping The Heat In - Chapter 6: Basement insulation

Author(s)
Natural Resources Canada
Organization(s)
Natural Resources Canada
Publication Date
Information sheet providing links and resources for insulating basements in cold climates.

Laboratory Evaluation of Energy Recovery Ventilators

Author(s)
Kosar
Organization(s)
BA-PIRC,
Gas Technology Institute
Publication Date
Report targeting the growing number of homes utilizing deep retrofit measures and new construction practices to realize sufficiently lower infiltration levels that require mechanical ventilation as prescribed by ASHRAE Standard 62.2.

Laboratory Test Report for Six ENERGY STAR Dehumidifiers

Author(s)
Winkler Jon,
Christensen Dane,
Tomerlin Jeff
Organization(s)
National Renewable Energy Laboratory,
NREL
Publication Date
Report documenting the measured performance of six residential ENERGY STAR vapor compression dehumidifiers.

Laboratory Testing of Aerosol for Enclosure Air Sealing

Author(s)
Harrington,
Modera
Organization(s)
Western Cooling Efficiency Center - UC Davis,
BIRA,
National Renewable Energy Laboratory
Publication Date
Research study to help development of an application protocol for aerosol sealing of building shells that will eventually be demonstrated on buildings in retrofit and new construction.

Lead Renovation, Repair and Painting Program Rules

Author(s)
U.S. Environmental Protection Agency
Organization(s)
EPA
Publication Date
EPA’s 2008 Lead-Based Paint Renovation, Repair and Painting (RRP) Rule (as amended in 2010 and 2011), aims to protect the public from lead-based paint hazards associated with renovation, repair and painting activities.

Lead Renovation, Repair and Painting Program: Contractors

Author(s)
EPA,
U.S. Environmental Protection Agency
Organization(s)
EPA
Publication Date
Website describing the EPA Lead Renovation, Repair, and Painting Rule that establishes requirements to reduce lead exposure for firms and individuals performing renovations that might disturb painted surfaces in buildings and homes built pre 1978 that might be occupied by children.