Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 301 - 350 of 564

Low Cost Interior Duct Systems for High Performance Homes in Hot Climates

Author(s)
Fonorow Ken,
Jenkins Dave,
Thomas-Rees Stephanie,
Chandra Subrato
Organization(s)
Florida Solar Energy Center,
FSEC,
Florida Home Energy and Resources Organization,
Florida HERO,
Energy Smart Home Plans,
Pacific Northwest National Laboratory,
PNNL
Publication Date
Document presenting a cost effective method that was used by four builders in the Gainesville, FL area to construct interior ducts in over a dozen site built homes.

Low-Cost Evaluation of Energy Savings at the Community Scale, Fresno California

Author(s)
Burdick Arlan,
Rapport Ari,
Poerschke Andrew
Organization(s)
Integrated Building and Construction Solutions,
IBACOS,
Wathen Castanos Hybrid Homes,
WCHH,
U.S. Department of Energy,
DOE
Publication Date
Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

Low-Cost Radon Reduction Pilot Study

Author(s)
Francisco Paul W.,
Rose William B,
Merrin Zachary
Organization(s)
Partnership for Advanced Residential Retrofit,
PARR,
Indoor Climate Research and Training,
Illinois Sustainable Technology Center,
University of Illinois at Urbana-Champaign,
U.S. Department of Energy,
DOE
Publication Date
Report on the impact of air sealing between the foundation and the living space on radon transport reduction across the foundation and living space floor assembly at fifteen home.

Low-Cost Solar Water Heating Research and Development Roadmap

Author(s)
Hudon Kate,
Merrigan Tim,
Burch Jay,
Maguire Jeff
Organization(s)
National Renewable Energy Laboratory,
NREL
Publication Date
Report identifying the target market for solar water heaters and potential pathways and cost/performance targets that must be met for these systems to realize large energy savings.

Marine Climate

Author(s)
Pacific Northwest National Laboratory,
U.S. Department of Energy
Organization(s)
PNNL,
DOE
Publication Date

Measure Guideline: Air Conditioner Diagnostics, Maintenance, and Replacement

Author(s)
Springer David,
Dakin Bill
Organization(s)
Alliance for Residential Building Innovation,
ARBI,
Davis Energy Group
Publication Date
Document providing information on the impact of various defects and the potential energy savings that can result from proper maintenance, and describing a two-step process for diagnosing and correcting faults. This document is targeted towards home performance contractors who are relatively...

Measure Guideline: Air Sealing Attics in Multifamily Buildings

Author(s)
Maxwell Sean,
Otis Casey
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
National Renewable Energy Laboratory,
NREL,
Steven Winter Associates,
SWA
Publication Date
Guideline describing the importance of the different types of multifamily building attics and their unique challenges, and outlines strategies and materials used in air-sealing them.

Measure Guideline: Air Sealing Mechanical Closets in Slab-on-Grade Homes

Author(s)
Dickson Bruce
Organization(s)
Integrated Building and Construction Solutions,
IBACOS,
National Renewable Energy Laboratory,
NREL
Publication Date
Document covering two fundamental retrofit strategies for air sealing around air handling systems that are located within the living space in an enclosed closet.

Measure Guideline: Basement Insulation Basics

Author(s)
Aldrich Robb,
Mantha Pallavi,
Puttagunta Srikanth
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
National Renewable Energy Laboratory,
NREL,
Steven Winter Associates,
SWA
Publication Date
Document describing good practices for insulating basements in new and existing homes.

Measure Guideline: Combined Space and Water Heating Installation and Optimization

Author(s)
Bohac Dave,
Schoenbauer Ben,
Huelman Patrick H
Organization(s)
NorthernSTAR Building America Partnership,
NorthernSTAR,
University of Minnesota,
UMN
Publication Date
Report describing the installation and operation of forced-air heating and domestic hot water combi systems in residential homes.

Measure Guideline: Combustion Safety for Natural Draft Appliances Using Indoor Air

Author(s)
Brand Larry
Organization(s)
Partnership for Advanced Residential Retrofit,
PARR,
Gas Technology Institute,
GTI Energy
Publication Date
This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Measure Guideline: Condensing Boilers - Control Strategies for Optimizing Performance and Comfort in Residential Applications

Author(s)
Arena Lois
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
National Renewable Energy Laboratory,
NREL
Publication Date
Document intended for designers and installers of hydronic heating systems interested in maximizing the overall system efficiency of condensing boilers when coupled with baseboard convectors. It is applicable to new and retrofit projects.

Measure Guideline: Condensing Boilers - Optimizing Efficiency and Response Time During Setback Operation

Author(s)
Arena Lois
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
National Renewable Energy Laboratory,
NREL
Publication Date
Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Measure Guideline: Energy-Efficient Window Performance and Selection

Author(s)
Carmody John,
Haglund Kerry
Organization(s)
NorthernSTAR Building America Partnership,
NorthernSTAR,
University of Minnesota,
National Renewable Energy Laboratory,
NREL
Publication Date
Document describing a process to help builders, homeowners, and designers select energy-efficient windows for new and existing residential construction in all U.S. climate zones.

Measure Guideline: Evaporative Condensers

Author(s)
German Alea,
Dakin Bill,
Hoeschele Marc
Organization(s)
Alliance for Residential Building Innovation,
ARBI,
National Renewable Energy Laboratory,
NREL,
Davis Energy Group
Publication Date
Report about evaporative condensers, to provide information on a cost-effective solution for energy and demand savings in homes with cooling loads.

Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes

Author(s)
Grin Aaron,
Lstiburek Joseph W
Organization(s)
Building Science Corporation,
BSC
Publication Date
Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Measure Guideline: Guide to Attic Air Sealing

Author(s)
Lstiburek Joseph W
Organization(s)
Building Science Corporation
Publication Date
Guideline describing information and specifications relevant to air-seal existing attics.

Measure Guideline: Heat Pump Water Heaters in New and Existing Homes

Author(s)
Shapiro Carl,
Puttagunta Srikanth,
Owens Douglas
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
National Renewable Energy Laboratory,
NREL,
Steven Winter Associates,
SWA
Publication Date
Document with evaluation of 14 heat pump water heaters (including three recently released HPWH products) installed in existing homes in the northeast region of the United States.

Measure Guideline: High Efficiency Natural Gas Furnaces

Author(s)
Brand Larry,
Rose William B
Organization(s)
Partnership for Advanced Residential Retrofit,
PARR,
National Renewable Energy Laboratory,
NREL,
Gas Technology Institute,
GTI Energy
Publication Date
Document covering installation of high efficiency gas furnaces, including when to install a high efficiency gas furnace as a retrofit measure, how to identify and address risks, and steps to follow for the selection and installation process.

Measure Guideline: Installing Rigid Foam Insulation on the Interior of Existing Brick Walls

Author(s)
Natarajan Hariharan,
Puttagunta Srikanth,
Klocke Steve
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
National Renewable Energy Laboratory,
NREL,
Steven Winter Associates,
SWA
Publication Date
Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Measure Guideline: Internal Insulation of Masonry Walls

Author(s)
Schumacher Christopher,
Ueno Kohta,
Straube John
Organization(s)
Building Science Corporation,
BSC,
National Renewable Energy Laboratory,
NREL
Publication Date
Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Measure Guideline: Passive Vents

Author(s)
Berger David,
Neri Robin
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA
Publication Date
Report describing the use of passive vents as a source of outdoor air in multifamily buildings.

Measure Guideline: Sealing and Insulating Ducts in Existing Homes

Author(s)
Aldrich Robb,
Puttagunta Srikanth
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
National Renewable Energy Laboratory,
NREL,
Steven Winter Associates,
SWA
Publication Date
Report describing the sealing and insulating of HVAC duct systems in existing homes.

Measure Guideline: Selecting Ventilation Systems for Existing Homes

Author(s)
Aldrich Robb
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
U.S. Department of Energy,
DOE
Publication Date
This document addresses adding—or improving—mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes either directly or by dilution. This report discusses where, when, and how much ventilation is appropriate in a home, including some...

Measure Guideline: Steam System Balancing and Tuning for Multifamily Residential Buildings

Author(s)
Choi Jayne,
Ludwig Peter,
Brand Larry
Organization(s)
Partnership for Advanced Residential Retrofit,
PARR,
Gas Technology Institute,
GTI Energy,
U.S. Department of Energy,
DOE,
Building America Partnership for Improved Residential Construction,
BA-PIRC
Publication Date
Document intending to put some context and structure around the process of balancing and tuning one-pipe steam systems to help practitioners begin to garner the potential in energy savings that this measure presents.

Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

Author(s)
Beal David,
McIlvaine Janet E R,
Fonorow Ken,
Martin Eric
Organization(s)
Building America Partnership for Improved Residential Construction,
BA-PIRC,
National Renewable Energy Laboratory,
NREL,
Florida Solar Energy Center,
FSEC,
U.S. Department of Energy,
DOE
Publication Date
Document illustrating guidelines for efficient installation of interior duct systems in new housing.

Measure Guideline: Transitioning From Three-Coat Stucco to One-Coat Stucco With EPS

Author(s)
Brozyna Kevin,
Rapport Ari,
Davis Graham
Organization(s)
Integrated Building and Construction Solutions,
IBACOS,
National Renewable Energy Laboratory,
NREL,
U.S. Department of Energy,
DOE
Publication Date
Document developed to help residential new construction builders transition from using a three-coat stucco system to a one-coat stucco system installed over 1 in. of expanded polystyrene (EPS) insulation.

Measure Guideline: Transitioning to a Tankless Water Heater

Author(s)
Brozyna Kevin,
Rapport Ari
Organization(s)
Integrated Building and Construction Solutions,
IBACOS,
National Renewable Energy Laboratory,
NREL,
U.S. Department of Energy,
DOE
Publication Date
Document developed to help residential builders and retrofitters transition from tank-type water heaters to tankless water heaters.

Measure Guideline: Ventilation Cooling

Author(s)
Springer David,
Dakin Bill,
German Alea
Organization(s)
Alliance for Residential Building Innovation,
ARBI,
National Renewable Energy Laboratory,
NREL,
Davis Energy Group,
U.S. Department of Energy,
DOE
Publication Date
Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Measure Guideline: Water Management at Tub and Shower Assemblies

Author(s)
Dickson Bruce
Organization(s)
Integrated Building and Construction Solutions,
IBACOS,
U.S. Department of Energy,
DOE
Publication Date
Report covering the fundamental waterproofing strategies for tub and shower assemblies.

Measure Guideline: Wood Window Repair, Rehabilitation, and Replacement

Author(s)
Baker Peter
Organization(s)
Building Science Corporation,
BSC,
National Renewable Energy Laboratory,
NREL,
U.S. Department of Energy,
DOE
Publication Date
Document providing information and guidance about rehabilitating, retrofitting, and replacing wood window assemblies in residential construction.

Measured Cooling Performance and Potential for Buried Duct Condensation in a 1991 Central Florida Retrofit Home

Author(s)
Chasar Dave,
Withers Charles R
Organization(s)
Building America Partnership for Improved Residential Construction,
BA-PIRC,
Florida Solar Energy Center,
FSEC,
U.S. Department of Energy,
DOE
Publication Date
Research study analyzing measured energy savings from a moderate retrofit by comparing post-retrofit performance with measured pre-retrofit monitored data.