Skip to main content

Library

This library contains research reports produced by the Building America program and other building science resources used to support this Solution Center. The materials cover both new construction and existing homes. Use the search box and/or the filters to explore hundreds of residential building resources. Access to some references not produced by Building America may require purchase from the publisher. Documents are listed alphabetically. While we continually update our database, links may have changed since posting. Please contact our webmaster if you find broken links.

Showing results 1 - 11 of 11

ANSI/ASHRAE Standard 55-2020, Thermal Environmental Conditions for Human Occupancy

Author(s)
American Society of Heating Refrigeration and Air-Conditioning Engineers
Organization(s)
ASHRAE,
American National Standards Institute,
ANSI
Publication Date
Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces. This is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at...

Builder's Guide to Cold Climates

Author(s)
Lstiburek
Organization(s)
Building Science Corporation
Publication Date
Book presenting the best techniques for energy and resource efficient residential construction in the colder climates of North America.

Builder's Guide to Hot-Humid Climates

Author(s)
Lstiburek
Organization(s)
Building Science Corporation
Publication Date
The Builder's Guide provides the building industry with the latest and best practical information on how to apply building science principles to structures as systems in hot-humid climate regions.

Construction Guide: Next Generation High Performance Walls in Climate Zones 3-5 - Part I: 2x6 Walls

Author(s)
Kochkin,
Wiehagen
Organization(s)
Home Innovation Research Labs
Publication Date
Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

Flexible Residential Test Facility: Impact of Infiltration and Ventilation on Measured Cooling Season Energy and Moisture Levels

Author(s)
Parker Danny S,
Kono Jamie E,
Vieira Robin K,
Fairey Philip W,
Sherwin John S,
Withers Charles,
Hoak David,
Beal David
Organization(s)
Building America Partnership for Improved Residential Construction,
BA-PIRC,
National Renewable Energy Laboratory,
NREL,
Florida Solar Energy Center,
FSEC
Publication Date
Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Residential Dehumidification Systems Research for Hot-Humid Climates

Author(s)
Rudd,
Lstiburek,
Eng,
Ueno
Organization(s)
Building Science Corporation,
National Renewable Energy Laboratory
Publication Date
Research study identifying the best performing, most energy-efficient and cost- effective techniques to provide controlled mechanical ventilation and humidity control in hot- humid climates with thermally efficient building envelopes.

Supplemental Dehumidification in Warm-Humid Climates, BA-1310

Author(s)
Rudd
Organization(s)
Building Science Corporation,
BSC
Publication Date
This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.

Types of Insulation

Author(s)
U.S. Department of Energy
Organization(s)
DOE
Publication Date
Information sheet about types and installation of insulation.