Showing results 1 - 16 of 16
Image
A piece of siding is used as sill extension and to provide slope in the opening for the window, which is deeper because exterior rigid foam has been added
Image
Air seal door and window rough openings with backer rod, caulk, or nonexpanding foam
Image
Image
Install an ENERGY STAR labeled insulated door with an automatic closer. Weather strip the door frame
Image
Plan view of duct or pipe penetration through exterior wall showing flashing and air sealing details
Image
Plan view of electric box installation in exterior wall showing flashing and air sealing details
Image
Right - The duct shows redundant sealing including the caulk, tape, and flashing
Image
Right - The pipe penetration is properly flashed and furring strips are installed on each side in preparation for installing cladding
Image
Image
Right - The water and air control layers are properly integrated around the hose bib
Image
Right - This duct penetration is properly flashed and integrated with the taped, foil-faced foam sheathing layer, which serves as the air and water barrier
Image
Right – Weatherstripping has been installed and remains in contact when the door is closed.
Image
Section view of duct or pipe penetration through exterior wall showing flashing and air sealing details
Image
Section view of electric box installation in exterior wall showing flashing and air sealing details
Image
Wire hardware mesh is fastened with a staple gun and screws to the wall to prevent pests from entering the building through small holes and cracks
Image
Wrong – There is visible light around the door because no weather stripping has been installed.