Showing results 1 - 76 of 76
Image
Impervious surfaces like patio slabs, sidewalks, and driveways that are within 10 feet of the home should slope away from the house.
Image
Image
A continuum of green (soft) to grey (hard) shoreline stabilization techniques used to mitigate the effects of erosion
Image
Image
An erosion control blanket protects the slope from erosion and provides favorable conditions for bank revegetation
Image
Image
Comprehensive water management features include a capillary break (≥ 6-mil polyethylene sheeting) at all crawlspace floors
Image
Image
Image
Image
Image
Dune erosion caused by the combination of a hurricane and a nor’easter in Ocean City, New Jersey
Image
Image
Good water management practices like sloping grade away from house, and installing gutters, perimeter drain pipe, a capillary break, and free-draining soils or drainage mat protect the foundation from water saturation.
Image
Gutters and downspouts direct rainwater down and away from buildings to keep building walls and foundations drier
Image
Installation of an erosion control blanket to minimize soil loss on sloped ground that has no established vegetation
Image
Image
Image
Image
Patio slabs, porch slabs, walks, and driveways sloped ≥ 0.25 in. per ft. away from home to edge of surface, or 10 ft., whichever is less
Image
Planting deep-rooted native grasses and shrubs on the banks of shorelines can help reduce the effects of erosion on sandy slopes
Image
Image
Image
Image
Proper gutter and downspout system terminates with final grade sloping away from the home
Image
Image
Image
Image
Retaining walls can prevent erosion and landslides and maintain access to critical infrastructure
Image
Right - Basement slab with a capillary break of either gravel or a drainage mat.
Image
Right - Below-grade concrete has been properly sealed against moisture and is now having insulation installed.
Image
Image
Right – Polyethylene sheeting vapor barrier is installed and sealed to the crawlspace walls with mastic
Image
Image
Right – The drain slopes away from the foundation and terminates at the proper distance
Image
Right – The drain tile connects to a sump pump which will pump water away from the foundation
Image
Right – The drain tile is installed along the bottom of the entire foundation footing
Image
Right – The drain tile is wrapped in fabric which will prevent it clogging with debris
Image
Image
Right – The insulated concrete forms that are below-grade have a damp-proof coating to prevent moisture seeping into the foundation
Image
Image
Image
Image
Image
Riprap is used as a common erosion control technique along beachfronts and streambanks
Image
Soil types include sand, silt, and clay- the more sand, the more quickly the soil drains.
Image
Image
Image
The below-grade wall assembly includes dampproofing, draining details, and insulation.
Image
The seams of the rigid insulation are not taped and it will not provide a complete capillary break
Image
Image
Image
Image
Image
There is polyethylene sheeting installed to provide a capillary break between the ground and slab
Image
This swale and berm slow the flow of stormwater across a site to minimize erosion.
Image
To control surface water, slope the ground away from the building perimeter on all sides.
Image
Image
Image
Image
Wrong - Class I vapor retarder over framed basement walls can cause condensation, mold, and rotting because plastic prevents drying to the inside; the outside should have waterproofing and vertical drainage, and the framing should be spaced from the wall.
Image
Wrong - The below-grade concrete does not have the correct construction to be impermeable to moisture because the lumber is untreated and against the concrete that lacks waterproofing.
Image
Wrong – A poorly sealed window and window well allow bulk water to enter the crawlspace from ground that slopes toward the structure
Image
Wrong – Drain pipe has been cut and foundation penetration has not been properly sealed
Image
Image
Wrong – No polyethylene sheeting vapor barrier is installed on the crawlspace floor
Image
Image
Wrong – The drain tile is cut and now does not extend around the entire foundation footing
Image
Wrong – The drain tile is not installed to terminate properly and will not transport water to the exterior
Image
Wrong – The drain tile is not wrapped in fabric and could become clogged with debris
Image
Image
Wrong – The gravel surrounding the drain tile is too large and will let too much debris through
Image
Wrong – The insulated concrete forms at the foundation do not have a damp-proof coating
Image
Wrong – The polyethylene sheeting vapor barrier is not attached to the piers with mechanical fasteners
Image
Image
