Showing results 1 - 15 of 15
A moisture meter verifies that the moisture of the framing is below the recommended 18%.
Brick wall assembly for a hot-humid climate with no Class I vapor retarder and with an air gap (drained cavity) to dissipate vapor driven into the wall by the sun.
Cement board (shown in dark grey) is installed behind an installed tub and shower surround.
Right – Moisture-resistant backing material has been used above and behind the tub enclosure.
Right: All joints in the rigid foam are taped to keep stucco out of joints for even drying. Mesh tape (shown here) is used with expanded polystyrene (EPS); acrylic sheathing tape or self-adhered membrane is used with XPS
Wrong – Building materials are being stored outdoors with no protection from weather