Showing results 1 - 12 of 12
Image
An anchor side plate is used to connect the concrete foundation to the sill plate from the exterior as part of a seismic retrofit when the sill plate is not accessible from the interior of the home
Image
Comprehensive above-grade water management details for a crawlspace foundation include a capillary break over the crawlspace floor, slope the surface grade away, installing gutters that slope away, and capillary break under sill plate.
Image
Correct seismic retrofit hardware for securing the sill plate to foundation wall
Image
Right - Permeable rigid mineral wool insulation and appropriate water-management flashing details are integrated with new rigid foam siding to keep water away from the sill beam above the foundation wall
Image
Right – This wall is constructed with the sill plate overhanging the top of the foundation wall so that when rigid foam is installed on the exterior of the foundation wall, its surface will align with the surface of the wall sheathing.
Image
Seal the crack between the sill plate and the foundation wall
Image
Termite shield is installed at the top of the foundation wall before installing sill plates; all seams and holes are sealed with epoxy
Image
The flat retrofit foundation plate is used to connect the concrete foundation to the sill plate from the exterior of the building as part of a seismic retrofit
Image
The universal retrofit foundation plate is used to connect the concrete foundation to the sill plate as part of a seismic retrofit
Image
This exterior wall retrofit permits drying to the exterior of a sill plate installed on an untreated flat foundation wall
Image
This exterior wall retrofit permits drying to the exterior of a sill plate installed on an untreated irregular foundation wall
Image
