Showing results 101 - 147 of 147
Image
The IR image on the right shows the sun is heating the southeast-facing wall of this concrete-block house to 36C (97F); this corner of the home would not be a good place for a cool room due to lack of shading and insulation
Image
The NEEP Cold Climate Air Source Heat Pump List allows users to search, sort, and filter for cold climate heat pumps by brand, model, product type, and ducting configuration; an advanced search provides helpful resources for sizing to the heating load
Image
The white TPO membrane roof on the row house on the right performs extremely well at reflecting solar energy and maintaining cool surface temperatures while the black EPDM membrane roof on the left heats up rapidly in the sunlight
Image
Image
These ducts were installed within the home's conditioned space in a central chaise down the main hallway.
Image
These plots compare sizing approaches in terms of the approximate annual heating load a heat pump might carry throughout the year for a hypothetical home in Minneapolis, MN.
Image
This “high static ducted cassette” heat pump system is similar to a traditional centrally ducted system, serving several areas of a home from one indoor unit
Image
This air handler is located within the homes conditioned space in a closet on the main floor of the home (Source: Tommy Williams Homes).
Image
This depiction of a saddle installed window heat pump does not obstruct window use and provides fairly quiet 120 Volt operation
Image
This diagram provides a more realistic view of how a typical direct evaporative cooler operates
Image
This experimental earth tube is 220 ft long, 8 inches in diameter, and is buried 10 feet deep
Image
This experimental radiative/evaporative hybrid cooling system uses water to reject heat at night through radiation and evaporation
Image
This home uses light-colored standard paints and finishes on siding and roofing materials to reduce cooling loads without adding material cost.
Image
This Houston home’s unique tri-generation system combines cooling, heating, dehumidifying, hot water, and power production and storage.
Image
This infrared image shows little heat gain from north-facing double-pane windows with blinds, but significant heat output from computer monitors
Image
This MSHP operates with 120 volts power, has an EER of 18 Btu/Wh, uses about 800 W at full output, and operates remotely with a smart home control system
Image
This multi-split heat pump system incorporates several indoor units connected to just one outdoor unit; the indoor units include a wall-mounted unit, floor-mounted, ceiling cassette, and mini-air handler.
Image
This night ventilation cooling system is timer-controlled and ducted to the home's HVAC ducts to bring in filtered fresh air at night.
Image
This plot shows a heat pump’s minimum and maximum cooling capacities overlaid with a home’s cooling load line, allowing a designer to assess how well-suited the equipment is for the specific home.
Image
This plot shows a heat pump’s minimum and maximum heating capacities overlaid with a home’s heating load line as well as the annual heating load hours for the home, allowing a designer to assess how well-suited the equipment is for the specific home.
Image
This plot shows a heat pump’s minimum and maximum heating capacities overlaid with a home’s heating load line, allowing a designer to assess how well-suited the equipment is for the specific home.
Image
This plot shows a heat pump’s minimum and maximum heating capacities overlaid with a home’s heating load line, allowing a designer to assess how well-suited the equipment is for the specific home.
Image
This room has several passive and low-energy cooling features including a ceiling fan, fully operable French doors, window shading, an outdoor water feature, and light-colored hard-scaping.
Image
This search for metal roofing products on the CRRC Rated Roof Products Directory highlights the initial and 3-year aged SRI values for each product
Image
This simplified decision tree can help a homeowner or contractor assess how appropriate a cool roof or wall will be for a particular home
Image
This single-zone mini-split ductless heat pump has only one indoor wall-mounted unit and one outdoor unit.
Image
This traditional centrally ducted heat pump heats and cools the entire home through a network of ducts.
Image
Image
This upflow air handler for a traditional heat pump has an electric resistance auxiliary heating element located at the top of the unit (circled in red).
Image
This wall-hung ductless indoor mini-split heat pump contains a fan, filter, and heating/cooling coil just like a traditional central air handler for a ducted heat pump system
Image
Image
Three-zone ductless mini-split system consisting of two wall-mounted and one ceiling-mounted indoor ductless units and one outdoor unit
Image
Three-zone mini-split system consisting of one wall-mounted ductless unit, one ceiling-mounted ductless unit, and one ducted indoor unit, all connected to one outdoor unit
Image
Image
Typical coaxial coil (liquid-to-refrigerant heat exchanger) used in a ground-source heat pump
Image
Image
Image
Using outdoor misters or spray fountains can cool the outside air before it enters the house
Image
Vertical trellises and tall shrubs provide very effective shading to the east-facing wall of this home.
Image
Vines growing on vertical trellises, along with tall shrubs, provide very effective shade for the east side of this house.
Image
Wall surfaces having high solar reflectance and high thermal emittance will remain cooler when exposed to direct sunlight.
Image
Whole-house fans draw outside air through windows into the home and exhaust it into a vented attic
Image
Whole-house fans or wind-driven cross ventilation can be used to draw air across thermal mass for a night flush strategy
Image
Wrong: Sized per Approach 1 or 2, this heat pump’s modulating zone has a small overlap with the home’s heating load line, resulting in a large amount of short-cycling; the unit will require backup heat when the temperature is below 25°F
Image
Wrong: Sized per Approach 3, there is minimal overlap between this heat pump’s modulating zone and the home’s heating load line, causing excessive short-cycling; it will require backup heat and may not contribute significantly at temperatures below 5°F
Image
Wrong: Sized per Approach 3, there is small overlap between this heat pump’s modulating zone and the home’s heating load line, resulting in excessive short-cycling; it will require backup heat when the temperature is below 5°F
Image
Wrong: This heat pump is oversized even for Approach 4, and its modulating zone has a small overlap with the home’s heating load line, resulting in a large amount of short-cycling.