Showing results 1 - 11 of 11
Image
Equipment needed to pressure test the airtightness of walls separating the house from an attached garage
Image
Gas sensors are used for gas leak detection and carbon monoxide detection
Image
Install a self-closing door with weatherstripping and thoroughly air-seal the shared house-garage walls to help keep automobile exhaust and other pollutants out of the home.
Image
Installing a garage exhaust fan is one important step in keeping auto exhaust and other pollutants out of the home
Image
The air tightness of the garage-to-house air barrier can be tested with a blower door kit and two manometers
Image
The air tightness of the house-garage air barrier can be tested using a CFM50 test that is first run with the garage door to outdoors closed
Image
The air tightness of the house-garage air barrier can be tested using a CFM50 test that is run first with the garage door to outdoors closed and then with the overhead garage door to outdoors open
Image
To test house-to-garage airtightness, after connecting the green tubing as shown, connect the red tubing as follows: connect the input tap on channel “A” of the two-channel manometer (2CM) to the reference tap on channel “B” of the 2CM
Image
To test house-to-garage airtightness, first set up the blower door kit with the smart manometer in the blower door
Image
Two manometers are used when pressure testing the airtightness of the walls separating the house from an attached garage
Image
Wrong – this framing material has a moisture content above 18% as shown by the moisture meter