Skip to main content
EERE » BTO » Building America » Solution Center Home » Image Gallery

Image Gallery

Showing results 1 - 12 of 12

Anchor bolts should be at least 1/2-inch diameter and should be embedded at least 7 inches into the foundation, spaced not more than 6 feet apart, and between 3.5 and 12 inches from each end of the sill plates.
Anchor bolts should be at least 1/2-inch diameter and should be embedded at least 7 inches into the foundation, spaced not more than 6 feet apart, and between 3.5 and 12 inches from each end of the sill plates.
Anchor bolts should be at least 1/2-inch diameter and should be embedded at least 7 inches into the foundation, spaced not more than 6 feet apart, and between 3.5 and 12 inches from each end of the sill plates.
View Image Download
Composition shingle roofing system showing sheathing and hot-mopped underlayment
Composition shingle roofing system showing sheathing and hot-mopped underlayment
Composition shingle roofing system showing sheathing and hot-mopped underlayment
View Image Download
Design Snow Loads Map for the United States, adapted from ASCE 7-10, Figure 7-1
Design Snow Loads Map for the United States, adapted from ASCE 7-10, Figure 7-1
Design Snow Loads Map for the United States, adapted from ASCE 7-10, Figure 7-1
View Image Download
Example of a truss bracing requirement tag that some truss manufactures place strategically onto the truss to remind installers
Example of a truss bracing requirement tag that some truss manufactures place strategically onto the truss to remind installers
Example of a truss bracing requirement tag that some truss manufactures place strategically onto the truss to remind installers
View Image Download
Ground Snow Loads for the United States (western), from 2021 IRC, Figure R301.2 (3)
Ground Snow Loads for the United States (western), from 2021 IRC, Figure R301.2 (3)
Ground Snow Loads for the United States (western), from 2021 IRC, Figure R301.2 (3)
View Image Download
Maximum spacing between braced wall lines, Table R602.10.1.3 in the IRC
Maximum spacing between braced wall lines, Table R602.10.1.3 in the IRC
Maximum spacing between braced wall lines, Table R602.10.1.3 in the IRC
View Image Download
Right – Proper fastening of sheathing on gable end overhang when re-roofing
Right – Proper fastening of sheathing on gable end overhang when re-roofing
Right – Proper fastening of sheathing on gable end overhang when re-roofing
View Image Download
Right – Retrofit Specification for installing roof sheathing an 18-inch gable end overhang
Right – Retrofit Specification for installing roof sheathing an 18-inch gable end overhang
Right – Retrofit Specification for installing roof sheathing an 18-inch gable end overhang
View Image Download
Safe Room Location Factors for New and Existing Homes
Safe Room Location Factors for New and Existing Homes
Safe Room Location Factors for New and Existing Homes
View Image Download
Seismic Map of the 2018 International Residential Code adapted by FEMA to show Seismic Design Categories in color
Seismic Map of the 2018 International Residential Code adapted by FEMA to show Seismic Design Categories in color
Seismic Map of the 2018 International Residential Code adapted by FEMA to show Seismic Design Categories in color
View Image Download
The Minimum Water Delivery Rates for Various Water Supply Amounts for Residential Fire Suppression Cisterns, as given in Table 4.6.1 in NFPA 1142
The Minimum Water Delivery Rates for Various Water Supply Amounts for Residential Fire Suppression Cisterns, as given in Table 4.6.1 in NFPA 1142
The Minimum Water Delivery Rates for Various Water Supply Amounts for Residential Fire Suppression Cisterns, as given in Table 4.6.1 in NFPA 1142
View Image Download
Underwriters Laboratory label for a safe room door.
Underwriters Laboratory label for a safe room door.
Underwriters Laboratory label for a safe room door.
View Image Download