Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 7057 - 7080 of 7314 results:

Image:

Wrong – Flue not sealed around opening

Wrong – Flue not sealed around opening
Image:

Wrong – Foam was sprayed at exterior sheathing and sill plate connection, leaving gaps beneath sill plate.

Wrong – Foam was sprayed at exterior sheathing and sill plate connection, leaving gaps beneath sill plate.
Image:

Wrong – For proper detailing of vinyl around windows and other obstacles, use utility trim, punch snaplocks into siding, and do not overlap directly beneath a window.

Wrong – For proper detailing of vinyl around windows and other obstacles, use utility trim, punch snaplocks into siding, and do not overlap directly beneath a window.
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Gable end vents can circumvent soffit-to-ridge airflow and allow in wind-driven rain and wildfire embers

Wrong – Gable end vents can circumvent soffit-to-ridge airflow and allow in wind-driven rain and wildfire embers
Image:

Wrong – Garage door failure due to positive pressures from hurricane force winds.

Wrong – Garage door failure due to positive pressures from hurricane force winds.
Image:

Wrong – Hole has not been air-sealed.

Wrong – Hole has not been air-sealed.
Image:

Wrong – Hole was not neatly cut with a saw, making it difficult to seal.

Wrong – Hole was not neatly cut with a saw, making it difficult to seal.
Image:

Wrong – Holes have been cut larger than needed, making them difficult to air-seal.

Wrong – Holes have been cut larger than needed, making them difficult to air-seal.
Image:

Wrong – Holes in the OSB are not patched.

Wrong – Holes in the OSB are not patched.
Image:

Wrong – If a fireplace is desired, install a vented model not an unvented model.

Wrong – If a fireplace is desired, install a vented model not an unvented model.
Image:

Wrong – If a wall vapor retarder is needed, as in this cold-climate home, openings in the vapor retarder should be sealed with tape.

Wrong – If a wall vapor retarder is needed, as in this cold-climate home, openings in the vapor retarder should be sealed with tape.
Image:

Wrong – If dimpled plastic is used it should be trimmed to drain down at the bottom rather than up where water can collect in it.

Wrong – If dimpled plastic is used it should be trimmed to drain down at the bottom rather than up where water can collect in it.
Image:

Wrong – If roof membrane is not fully adhered, it can flutter and fail due to negative pressure from wind above and positive pressure from air leakage through roof deck below

Wrong – If roof membrane is not fully adhered, it can flutter and fail due to negative pressure from wind above and positive pressure from air leakage through roof deck below
Image:

Wrong – If the insulated sheathing will serve as an air barrier and drainage plane, any cuts and seams must be taped or sealed.

Wrong – If the insulated sheathing will serve as an air barrier and drainage plane, any cuts and seams must be taped or sealed.
Image:

Wrong – Incorrect location of fasteners in an roof asphalt shingle

Wrong – Incorrect location of fasteners in an roof asphalt shingle
Image:

Wrong – Insulated sheathing seams should align with framing members

Wrong – Insulated sheathing seams should align with framing members
Image:

Wrong – Insulation does not fill entire cavity nor is there an air barrier present between the double wall

Wrong – Insulation does not fill entire cavity nor is there an air barrier present between the double wall
Image:

Wrong – Insulation has compression and misalignment

Wrong – Insulation has compression and misalignment
Image:

Wrong – Insulation has misalignment, compression, and gaps

Wrong – Insulation has misalignment, compression, and gaps
Image:

Wrong – Insulation is in direct contact with this non-insulation contact (IC)-rated recessed light fixture

Wrong – Insulation is in direct contact with this non-insulation contact (IC)-rated recessed light fixture
Image:

Wrong – Insulation is misaligned

Wrong – Insulation is misaligned